Search results for: 'vc series vacuum conveyor'

1

This single chamber vacuum sealer is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

This single chamber vacuum sealer featuring dual sealing bars, one on each side is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.

The machine features one (1) seal bar that is approx. 10" wide. The open area in the chamber is about 10" x 13.5" (this does not include the area taken up by the seal bar). Simply set the optimal vacuum time, sealing time, cooling time, and sealing temperature for your bags and away you go.

• Designed to shrink most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors; optional “dead” roller conveyor for polyethylene
• Four-directional air flow provides positive shrinking
• Variable air flow and air velocity for a variety of products and applications
• Bottom air flow adjustment – full on, ½ on, full off on ET2010
• Conveyor speed up to 67 feet per minute
• Available in 220v – single or 3-phase
• Made in the USA

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Automatic takeaway conveyor
• Heavy duty film cradle allows for easy changeovers and adjustments
• Adjustable pin perforator provides air evacuation
• Made in the USA

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Variable speed infeed and outfeed conveyors
• Hot knife seal available with mushroom (standard), pancake, arrow, or poly inserts
• Multiple pin perforators provide air evacuation
• Side seal size 30”, 40” or 50”; front seal size 50”, 70”, or 100”
• Maximum film width up to 60”
• Maximum film roll OD up to 12”
• 60 PSI
• Available in 220v, or 480v
• Made in the USA

Solid Ink Coding Aerating/Air Suction

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• 25” wide hot knife seal provides a consistent “bulls-eye”closure
• Upper and lower powered film unwind for smooth feed of film
• 12” product pass through height accommodates 11” tall product
• Self tracking conveyor belt and product indexing 34.75” conveyor height
• Siemens PLC touchscreen with full color HMI
• 25” max film width
• 14” max film OD
• 220V standard; optional 480V
• Requires 60 psi; 3.5 cfm

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuatio
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 110v, 220v, or optional 480v
• Made in the USA

Cleveland machinery manufactures standard conveyors for all our machines as well as custom conveyors for all of our customers. All of our conveyors are manufactured in stainless steel and have tool-less guide rail adjustments. We stock 4.5 and 7.5 inch straight conveyors in 10, 13, 16 and 20 feet lengths.

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Adjustable product tray accommodates wide variety of product sizes
• Heavy duty film roll support and simple film loading
• Adjustable pin perforator provides air evacuation
• Seal size of 16” x 22” or 16” x 36”
• Maximum film width up to 19”
• Available in 110v or 220v Made in the USA

The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.

• Available with leg supports in 2 heights;
  18-1/4” to 24-1/4” Height
  26-1/4” to 32-1/4” Height
• 1.9” Dia. Rollers
• Rollers on 3” Centers
• 24” Overall Width
• 21” Between Frame

The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.

• Available with leg supports in 2 heights;
  18-1/4” to 24-1/4” Height
  26-1/4” to 32-1/4” Height
• 1.9” Dia. Rollers
• Rollers on 3” Centers
• 24” Overall Width
• 21” Between Frame

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• High speed with product indexing
• Hot knife seal bar for consistent and clean seal
• Automatic cycle timing with adjustable dwell time
• HMI controller with simple menus for easy operation
• Multiple pin perforator provides precise air evacuation
• 17”W x 21”L seal area
• Maximum film width up to 22”
• Maximum film roll OD up to 12”
• 80 psi

The CE-100 Conveyor is a material transporter that is widely used in dairy, food, veterinary medicine and chemical e.g. Ideal applications are mainly used in transporting powdery, small block and granular material.

• Auger Diameter: 4 inches (100 mm)
• Pitch: 3.14 inches (80 mm)
• Screw Speed: 140 rotations per minute
• Throughput: 105 cubic feet per hour
• Capacity 230L Hopper
• Motor Drive: 1100W Vibrator 68W
• Power Supply 220V 3 phase
• Warranty 1 Year Warranty

Hopper for SGP Series, 3 gal.

Hopper for SGP Series, 5 gal.

Hopper for SGP Series, 8 gal.

Hopper for SGP Series, 15 gal.

Hopper for SGP Series, 22 gal.

• Seal head system available as a hot knife or hot band depending on your application
• Designed to seal polyolefin or PVC shrink films
• Automatic cycle timing with adjustable dwell time
• 15” wide x 8” tall x 26” long chamber
• Seal size of 16” x 20”
• Maximum film width up to 18”

Heated Hopper for SGP Series, 8 gal.

Hopper Lid for SGP Series, 3 gal.

Hopper Lid for SGP Series, 5 gal.

Hopper Lid for SGP Series, 8 gal.

Hopper Lid for SGP Series, 15 gal.

SGP Series Single Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGY Series Single Head Viton Seal Kit

SGY Series Dual Head Viton Seal Kit

Hopper with Mixer for SGP Series, 8 gal.

Hopper with Mixer for SGP Series, 22 gal.

SGP Series Single Head Buna / Nitrile Seal Kit

SGP Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

• Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
• Max.Packing size 160 x 350H mm (6.29" x 13.78")
• Conveyor motor DC50W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS (33 lb)
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 9KW
• 36 Amps
• Dimension 1500x400x1520 mm (59" x 15.75" x 60")
• Dimension from floor to conveyor (adjustable) 23"-28"

• Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
• Max.Packing size 160 x 350H mm (6.29" x 13.78")
• Conveyor motor DC50W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS (33 lb)
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 9KW
• 36 Amps
• Dimension 1500x400x1520 mm (59" x 15.75" x 60")
• Dimension from floor to conveyor (adjustable) 23"-28"

Heated Hopper with Mixer for SGP Series, 4.5 gal.

• Infeed Hopper Capacity: 100L
• Dispensing Height: 69"
• Bucket volume: 1.8L
• Bucket size: 16.5" L x 5.5" W x 2.76"H
• Dispersing Height 69"
• Lifting speed 2.5 - 5 cubic meter/hour
• Power 550w Voltage 220v
• Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
• Specification The parts contacted with food are food grade plastic
• Requires Assembly*

Pneumatic conveyor small capacity pellet loader kit. Aluminum pneumatic loader with control panel and 1.25" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand. Ideal for feeding plastic extrusion machines and similar applications.

Best for materials that have no dust, such as clean pellets.

• Speed:          0-10 m/min
• Tunnel Size:  800x400x200 mm
                     31.5 x 15.75 x 7.9 in.
• Load:          5Kg (11 lbs)

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel – Food Grade Standard
• Seals: Buna – Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8”
• Spring Stainless – Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

• Machine Dimensions 37" L x 27" W x 48" H
• Adjustable Height 37 TO 43 INCHES
• Belt Dimensions 36" L x 3/4" W x 1" H
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Machine Dimensions 37" L x 24.5" W x 44" H
• Adjustable Height 35.5 TO 42 INCHES
• Angle Adjustment For Tapered Bottles
• Belt Dimensions 1”H x 36” L x ¾” Thickness
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Adjustable Guide Rails, Up To 4.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

Available in 6', 8', 10' & 12' lengths.

• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

• Adjustable Guide Rails, Up To 7.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

Pneumatic Conveyor Coffer Load Kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, 2" inlet. Includes control panel and 15' grounded flexible hose, 36" aluminum pick-up wand.

Best for coffee beans, grains, seeds, other similar organic materials.

Pneumatic conveyor powder loader kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, control panel and 2" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand.

Best for powders or very dusty materials.

1

1

1

1

1

Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)

Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)

Speed – Up to 15 cases a minute

• Tunnel size (mm) 1000x150x150
• Tunnel size (in) 39.4" x 6" x 6"
• Max.Packing size mm 105 x 350H
• Max.Packing size (in) 4.14"  x 13.78"
• Conveyor motor AC90W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 7KW
• 36 Amps
• Dimension (mm) 1500x350x1500
• Dimension (in) 59"x13.78"x59"
• Dimension from floor to conveyor (adjustable) 23"-28"

CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing  stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is  suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.

• Stainless Steel Construction
• Digital Thermostat (not shown)
• Product Counter (not shown)
• 1/2 HP Motor
• 2 Sets of Heating Blocks
• Right Feed
• Dry ink coding
• 110 volt
• 0-315”/min seal speed
• 8mm seal width
• 11.8” wide conveyor

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuation
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 220v, or optional 480v 60-80 psi air requirement
• Made in the USA

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

Ce-Trulabeler-W1- Wraparound labeler with 10ft conveyor

The SQY Series direct draw piston fillers are tabletop volumetric semi-automatic piston filling equipment used for liquid and paste products with low or high viscosity.

Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

• Heavy duty stainless steel frame
• Accommodate a wide range of containers.
• Manual adjustable height for cap tightener head.
• Cad designed, CNC manufactured, thoroughly tested
• Omron PLC for all machine logic functions
• Frequency control drive for conveyor speed
• Front panel START and Emergency STOP for easy access.
• Front panel binary code for changing cap time torque.

CE-15 Automatic inline bottle cleaner machine (conveyor or options included):

The CE-HEAT-IT02 Heat Tunnel is a game-changer for the packaging industry. Its compact size saves valuable space on your production line, only taking up 10 inches. Its impressive height adjustability of 13 inches ensures consistent results for containers of various sizes. With a changeable diffuser, it seamlessly integrates into different container lines, providing versatility and adaptability to your packaging process. Our Heat Tunnel is able to shrink neck bands and full body sleeves up to 120mm in diameter.

Model	CE-975
voltage	220V 60HZ
Sealing Current	Static 2A / Dynamic 10A
Power	2000W
Capacity	1-30 ft. / min
Sealing Diameter	0.75" to 4.75"
Height of bottles	1.57" to 15.5"
Machine weight	155 lbs
Machine size	61" x 22" x 53" Conveyor height from floor 31.5"

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard (See Separate List for Sizing)
• Tubing: Silicone 7/16 Inch OD
• Valve: ¼"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

This machine is widely used in various industries including food, printing, pharmaceutical, electronics, hardware and many other industries that require shrink packaging. It is suitable for use with POF, PE, PVC and other packaging materials.

Our piston filling machines are the ideal jar filling equipment for liquid fill and paste filling applications.