Search results for: '20 hand operated impulse sealer cepfs 500'

• 20" Hand Operated Impulse Sealer
• Maximum Seal Length: 20 inches
• Max. Seal Thickness: 8 mil
• Seal Width: 3 mil

CEFS-F450 18" Foot Operated Impulse Sealer

CEFS-F650 26" Foot Operated Impulse Sealer

CEFS-F350 14" Foot Operated Impulse Sealer

• 8" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 8 inch (200 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 3/16 Inches (5 mm)
• Heat Time: 0-3.5 (sec)

• 16" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 16 inch(400 mm )
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

• 12" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 12 Inches (300 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

When it comes to convenience, you can’t do much better than this hand-held electric capping machine. It is easy to carry, and is mainly used for easy screwing (tightening) and unscrewing (loosening) of the cap.

Since the design has an adjustable clutch, it is suitable for all kinds of strength bottle capping work. Applying to bottle cap ranges of 10-50 mm, and single production capacities of up to 30-90 bottles / min, this convenient device is also highly effective.

Here are a few more details pertaining to this bottle capping machine, as well as some reviews to consider:

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuation
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 220v, or optional 480v 60-80 psi air requirement
• Made in the USA

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuatio
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 110v, 220v, or optional 480v
• Made in the USA

Max-Tac Hot Melt Hand Tape 1.61 mil 2" Case of 36 Rolls

20" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths

Model	Sealing Diameter
CE-905A	20 to 100 mm
CE-905B	15 to 35 mm

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Automatic takeaway conveyor
• Heavy duty film cradle allows for easy changeovers and adjustments
• Adjustable pin perforator provides air evacuation
• Made in the USA

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Case Length: 6" minimum — 20" maximum

Case Width: 6" minimum — 20" maximum Case

Height: 4.5" minimum — 20" maximum

Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps

• Speed: Up to 720 Cases/Hour (65 fpm)
• Case Length: 6" minimum – no maximum
• Case Width: 4.75" minimum – 20" maximum
• Case Height: 6" minimum – 20" maximum

Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.

The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.

• Bottom Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
  * May be able to run smaller boxes with testing
• Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP drive motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

• 1/8" Seal width x 20" seal length
• 60 second Adjustable Timers for Heat and Cool
• Electronic Temperature control
• Start button
• Includes 2 standard Tube Racks
• Welded steel case with Powder coat finish

CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing  stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is  suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.

• Stainless Steel Construction
• Digital Thermostat (not shown)
• Product Counter (not shown)
• 1/2 HP Motor
• 2 Sets of Heating Blocks
• Right Feed
• Dry ink coding
• 110 volt
• 0-315”/min seal speed
• 8mm seal width
• 11.8” wide conveyor

L-bar sealers use center fold film to protect your products and give them an attractive, professional look. Cleveland Equipment's CEFQL380 L-Bar Sealer is easy to use and to maintain and is an excellent L-sealer for many types of products. Weighing 77 pounds, this machine can handle maximum sealing dimensions of 19.65" x 13.75". It's small enough to set up on a tabletop or desk.

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• High speed with product indexing
• Hot knife seal bar for consistent and clean seal
• Automatic cycle timing with adjustable dwell time
• HMI controller with simple menus for easy operation
• Multiple pin perforator provides precise air evacuation
• 17”W x 21”L seal area
• Maximum film width up to 22”
• Maximum film roll OD up to 12”
• 80 psi

Top & Bottom Case Sealer

• Drive: Side Belts
• Minimum Box Size: 7.9"(L) x 5.9"(W) x 4.7"(H)
• Maximum Box Size: 19.6"(L) x 19.6"(W) x 19.6"(H)
• Heavy Duty 200 Watt Motors (2)
• Belt Speed: 59'/ minute (18m/min)
• Power: 110V 60Hz

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

Top & Bottom Case Sealer

Semi-automatic carton sealers are great to have on hand if you need to pack many boxes of different sizes. With intuitive, easy-to-use functions, these box tapers are fast and efficient to help you save time and money. These smart carton sealers are adjustable and create clean, uniform seals across any carton. Simply and quickly adjust the machine to the width and height of the box you're sealing and it will apply the same amount of tape to each box. They're designed to work best when sealing many boxes of the same size during each product run.

• Drive: Top and Bottom Belts
• Minimum Box Size: 5.9"(L) x 6.5"(W) x 5"(H)
• Maximum Box Size: 19.6"(W) x 19.6"(H)
• 2 Heavy Duty 120 Watt Motors ( Competitors use 90 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2 " Tape Heads (3" Tape Heads optional)
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Stop
• 4 Casters ( Included )
• 16 inch Infeed/Exit Tables ( Included )

The side belt driven Easy Packer is designed for compact, packing and sealing. The durable design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum. The Easy Packer provides a fast and cost-efficient alternative to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• * May be able to run smaller boxes with testing
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

Top & Bottom Case Sealer

Our industrial-grade semi-automatic box sealers are designed for both small- and large-scale businesses. Well-equipped with powerful, reliable motors and belt systems that are truly made to last, these industrial carton sealers provide clean and uniform seals on boxes small and large. Three heavy-duty motors allow these machines to run safer for longer, while intuitive, easy-to-use functions mean simple operation for your whole staff. Cleveland Equipment provides financing on carton sealers and can ship them to you in as little as 24 hours.

• Drive: Top and Side Belts
• Minimum Box Size: 5.9"(L) x 4.75"(W) x 6.5"(H)
• Maximum Box Size: 27"(W) x 27"(H)
• (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2" Tape Heads (3" Tape Heads Optional)
• Includes 16" Wide Infeed/Outfeed Tables ( Included )
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Switch

 

• Sealing and shrinking in one station
• Single person easy operation
• Economical for low volume production.
• Standard shrink film:  POV, POF, PP
• Max Sealing Size: L 21.65" (550mm) x W 15.75" (400mm)
• Power supply: 220-240V / 50-60Hz, Single Phase - wire only

 

• • Sealing and shrinking in one station
  • Single person easy operation
  • Economical for low volume production.
  • Power Supply 220V/60Hz, Single Phase.
  • Standard shrink film:  POV, POF, PP
  • Max Package size: 15.75 x 15.75 x 5 in.

Top & Bottom Case Sealer

Cleveland Equipment semi-automatic box sealers are designed to help you save time and money. Adjustable belt systems allow you to tailor the machine to both small and large boxes for clean, uniform seals each and every time. Each carton sealer has a set of powerful, reliable 200 watt motors ( our competitors use under sized 120 watt motors ) and features user-oriented operations to make running it a breeze. Please make note of the breaker switch which is not offered by our competitors. In case of a power surge this will protect the electrical components. Our machines are well-suited for all levels in the packaging industry. We stock our machines so they are available to ship to you within 24 hours.

• Drive: Top and Side Belts
• Minimum Box Size: 5.9"(L) x 4.75"(W) 6.5"(H)
• Maximum Box Size: 19.6"(W) x 19.6"(H)
• (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2" Tape Heads (3" Tape Heads Optional)
• 16" Wide Infeed/Outfeed Tables ( Included )
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Stop

Solid Ink Coding Aerating/Air Suction

This bottle capping machine is ideal if you work with pills, coated capsules, or other tablets. And since different types of products require different industrial needs, this capper machine can fill everything from plastic bags to bottles.

Adjust the bottle height if need be, as well as the torque to best suit your preferences. And since this capping equipment is hand-held and sleek in design, it’s simple to use for any purpose. Plus, don’t worry about cap breakage thanks to the rubber on the bottom of the machine.

With convenience and efficiency like this, not to mention a stainless steel and aluminum alloy frame, you can’t go wrong with this bottle capping machine.

Here are some specifics when it comes to this capping equipment, as well as some reviews:

• Cap type: screw cap
• Cap diameter: 30mm ~ 60mm
• Capping speed: 20~30 bottles/ min
• Air pressure requirement: 2~5kg
• Voltage: 110V / 60Hz
• Amperage: 5A
• Power: 180W

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Adjustable Steel Band Sealer Stand
Adjustable Height is 34 inches to 40 inches.

Economical Unit for Medium and Small Production Filling

• 7.5 Gallon Hopper
• Fill amount 4oz to 2.5 gal
• Min bottle height 4 in Max 15 inches
• Min bottle opening ½ inch
• Handles from 3 to 30 containers per minute*
• Accepts Free-flowing and low viscosity liquids
• Stainless Steel tank
• Stainless Steel Spouts
• Painted Stand (Stainless Steel Optional)
• Capable of 20+ quarts of water per minute
• Capable of 10+ quarts of syrup per minute
• Capable of 10+ gallons of water per minute
• *Test results based on standard 5 spout machine

Adjustable Steel Band Sealer Stand
Adjustable Height is 34 inches to 40 inches.

Element kit for CEFS-F350 Foot Sealer - 14"

Element kit for CEFS-F450 Foot Sealer - 18"

Element kit for CFES-F650 Foot Sealer - 26"

Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.

• Feed Direction
  • Right to Left
  • Left to Right
    
    
• Seal Width
  • 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
    
    
• Sealing Capacity
  • 6 mil single thickness gusseted bags
  • 12 mil single thickness flat bags
    
    
• Temperature Control
  • 600 ± 2 ºF
    
    
• Speed
  • Variable speed up to 750 inches per minute

Parts Kit for the CE-2500-HVE Continuous Band Sealer

The CE-2771 Continuous Duty Air-Cooled Induction Sealing Machine is a contact-less cap sealing system to hermetically seal the top of plastic and glass containers. This sealing process takes place after the container has been filled and capped.

 

Two in One Bag Sealer Machine! Horizontal / Vertical Configurations with Ink Print Wheel

The CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.

The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.

Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!

The SB-2HD’s side belts are great for light or heavyweight, narrow or small boxes. The system is ideal for void fill cases where the packaged product does not support the box. SB-2HD is designed to handle boxes that most other case tapers can’t. SB-2HD offers fast and easy case changes with adjustable side rails and flexibility for boxes 4.5” long and as narrow as 4” wide and as low as 2” tall. 

•  Side belt, top and bottom case sealer
•  Belt Speed – 72 feet/per minute
•  Tape Speed – 30 cases/per minute, depending on box size and operator efficiency
•  No air required
•  Minimum Box Size: 4.5” (L) x 4.0” (W) x 2.0” (H)
•  Maximum Box Size: Infinite (L) x 20” (W) x 25.5” (H)

This single chamber vacuum sealer is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

This single chamber vacuum sealer featuring dual sealing bars, one on each side is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.

• No Tools Required! Hand crank operation
• Fully adjustable unwind tension
• Waste rewind spindle to collect backing paper
• Durable all steel frame with powder coat finish
• Product Size: 1” to 5” Diameter
• Minimum Label Size: 1/2” x 1/2”
• Maximum Label Width: 5”
• Maximum Roll Diameter: 12”
• Core Size Diameter: 1” or 3”

This machine is widely used in various industries including food, printing, pharmaceutical, electronics, hardware and many other industries that require shrink packaging. It is suitable for use with POF, PE, PVC and other packaging materials.

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Variable speed infeed and outfeed conveyors
• Hot knife seal available with mushroom (standard), pancake, arrow, or poly inserts
• Multiple pin perforators provide air evacuation
• Side seal size 30”, 40” or 50”; front seal size 50”, 70”, or 100”
• Maximum film width up to 60”
• Maximum film roll OD up to 12”
• 60 PSI
• Available in 220v, or 480v
• Made in the USA

• Simple to operate
• Heavy Duty Construction
• LCD Screen and PLC
• Programmable wrap pattern 
• Single button automatic cycle start
• Emergency stop button
• Variable film carriage speed
• Auto load height photo-eye
• Manual controls

• Max Pallet Size:                  50” W x 50” L x 98” H
• Machine Dimensions:          96.5" L x 59" W x 109.5" H
• App. Shipping Weight:          1,300 Lbs.
• Power Requirements:          120V / 1Ph / 15A Dedicated Service
• Maximum Load Weight:        4000 Lbs

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Adjustable product tray accommodates wide variety of product sizes
• Heavy duty film roll support and simple film loading
• Adjustable pin perforator provides air evacuation
• Seal size of 16” x 22” or 16” x 36”
• Maximum film width up to 19”
• Available in 110v or 220v Made in the USA

• Seal head system available as a hot knife or hot band depending on your application
• Designed to seal polyolefin or PVC shrink films
• Automatic cycle timing with adjustable dwell time
• 15” wide x 8” tall x 26” long chamber
• Seal size of 16” x 20”
• Maximum film width up to 18”

 

• Sealing Speed: 0-16 m/min
• Sealing Width: 8-10 mm
• Sealing Temperature: 0-300° C
• Film Thickness: ≤.08mm
• Max Bag Weight: ≤ 1kg
• Max Conveyor Weight: ≤ 3kg
• Horizontal Only

Model	CE-975
voltage	220V 60HZ
Sealing Current	Static 2A / Dynamic 10A
Power	2000W
Capacity	1-30 ft. / min
Sealing Diameter	0.75" to 4.75"
Height of bottles	1.57" to 15.5"
Machine weight	155 lbs
Machine size	61" x 22" x 53" Conveyor height from floor 31.5"

The SQY Series direct draw piston fillers are tabletop volumetric semi-automatic piston filling equipment used for liquid and paste products with low or high viscosity.

1.0 - 3.5 oz / 30ml - 100ml

3.5 - 33.5 oz / 100ml - 1000ml

18.5 - 169.0 oz / 500ml - 5000ml

4.0 - 33.5 oz / 120ml - 1000ml

18.5 - 169.0 oz / 500ml - 5000ml

1.5 - 8.5 oz / 45ml - 250ml

Our piston filling machines are the ideal jar filling equipment for liquid fill and paste filling applications.

Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):

• Designed to shrink most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors; optional “dead” roller conveyor for polyethylene
• Four-directional air flow provides positive shrinking
• Variable air flow and air velocity for a variety of products and applications
• Bottom air flow adjustment – full on, ½ on, full off on ET2010
• Conveyor speed up to 67 feet per minute
• Available in 220v – single or 3-phase
• Made in the USA

The machine features one (1) seal bar that is approx. 10" wide. The open area in the chamber is about 10" x 13.5" (this does not include the area taken up by the seal bar). Simply set the optimal vacuum time, sealing time, cooling time, and sealing temperature for your bags and away you go.

Includes:

Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)

Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)

Speed – Up to 15 cases a minute

Eastey's SB-EX Stainless Steel Case Taper offers the quality that you have come to rely on from Eastey. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 30 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

• Minimum Box Size: 7"(L) x 7"(W) x 4"(H)
• Maximum Box Size: 23.5"(L) x 19.5"(W) x ∞(H)
• Emergency stop switch
• Locking casters
• Air: 1 CFM at 60 PSI
• Electrical: None required
• 1 year on parts

Small to Medium sized companies moving from hand filling to automated filling of bulk sized cartons and bags

• Fill Range:10 lbs to 75 lbs range
• Output Speed:Up to 300-400 fills/hour*
• Capacity:Bulk filling for weights of up to 75lbs
• Single Head

The CE-S5 semi-automatic scale has automatic tare, automatic feed and speed controls for both bulk and dribble feed rates, and automatic set points.

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

The CE-100 Conveyor is a material transporter that is widely used in dairy, food, veterinary medicine and chemical e.g. Ideal applications are mainly used in transporting powdery, small block and granular material.

• Auger Diameter: 4 inches (100 mm)
• Pitch: 3.14 inches (80 mm)
• Screw Speed: 140 rotations per minute
• Throughput: 105 cubic feet per hour
• Capacity 230L Hopper
• Motor Drive: 1100W Vibrator 68W
• Power Supply 220V 3 phase
• Warranty 1 Year Warranty

The BB-2 Bottom Belt Stainless Steel Industrial Case Taper is a cost-effective top and bottom case taper designed for large run case sealing. The BB-2 utilizes pressure-sensitive tape and features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes.

• Bottom Belt Drive
• wash-down NEMA 4
• Includes 1 pack table
• Minimum Box Size: 5"(L) x 6"(W) x 4"(H)
• Maximum Box Size: ∞"(L) x 21"(W) x 20.5"(H)
• Single drive motor
• Tape Speed: 30 cases/min
• Belt Speed: 60ft/min
• Power Supply 110 VAC, 60Hz, 6A

This semi-automatic capper machine has speeds of 20-25 bpm, and is designed for 22-110 mm screw caps and bottle heights ranging from 50-260 mm. With an adjustable capping height (as well as speed), this screw capping machine has the flexibility you need.

Featuring a stainless steel body along with stainless steel stand and casters, this machine has the strength and durability your process requires. Additional benefits to this design are such features as a sensor detection system. This means that if there is no bottle, then no capping occurs.

This machine also has a microprocessor, enabling user-friendly control, as well as an emergency stop button.

It is important to note that caps have to be fed manually into this machine. It should not be washed down. Instead, it needs to be wiped down when cleaning. Here is some additional information and reviews pertaining to this bottle capping machine:

• Capping speed: 20-25 bpm
• Suitable for 22-110 mm screw cap
• Bottle height: 50-260 mm
• THIS IS NOT A WASH DOWN UNIT. IT IS A WIPE DOWN UNIT ONLY

Small to medium sized companies needing high rates of speed, blending products, or integrating with automatic baggers.

• Fill Range: 0.5 oz to 20 lbs range
• Output Speed: Up to 600-1500 fills/hour*
• Capacity:5.1 cu.ft. product capacity
• Dual Heads

The CE-S7 can be set to weigh two completely different products at different weights to easily mix products into a container.

• Adjustable Guide Rails, Up To 7.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

• Adjustable Guide Rails, Up To 4.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

Available in 6', 8', 10' & 12' lengths.

Eastey's SB-EX Random allows users to run a variety of case sizes without having to manually adjust for each box. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

Machine Dimensions: