This is a unique tunnel that is great for various applications large and small. The overall height of the tunnel is adjustable from approx. 4" to a maximum of 13.75". There are 6 heat bars inside the tunnel to keep the heat even and consistent though out the tunnel. Also there are vents on the sides that can be used to direct the heat at your product. Another great attribute is that the length of the tunnel is 47" which allows plenty of distance for the product to be inside the tunnel and shrink properly to get the best results.
This machine works well with various products from a shrink sleeve on a strip of LED lights to larger boxes and containers. Superior results compared to other smaller and shorter tunnels.
ALL LARGE MACHINES COME WITH A 3 WIRE PIGTAIL ; 2 HOT WIRES AND ONE THINNER GROUND WIRE ( NOT A PLUG ) .YOU WILL NEED TO ADD AN END PLUG OR GO DIRECT TO THE BREAKER BOX .
Maximum load on conveyor - 11 lbs.
47" x 17.717”" x 13.75" (1200mm x 450mm x 350mm)
220V/60Hz, Single Phase
41 amps
Share your thoughts with other customers