Search results for: 'ce br6000 band sealer'

Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.

• Feed Direction
  • Right to Left
  • Left to Right
    
    
• Seal Width
  • 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
    
    
• Sealing Capacity
  • 6 mil single thickness gusseted bags
  • 12 mil single thickness flat bags
    
    
• Temperature Control
  • 600 ± 2 ºF
    
    
• Speed
  • Variable speed up to 750 inches per minute

Parts Kit for the CE-2500-HVE Continuous Band Sealer

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.

Adjustable Steel Band Sealer Stand
Adjustable Height is 34 inches to 40 inches.

Adjustable Steel Band Sealer Stand
Adjustable Height is 34 inches to 40 inches.

CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing  stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is  suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.

• Stainless Steel Construction
• Digital Thermostat (not shown)
• Product Counter (not shown)
• 1/2 HP Motor
• 2 Sets of Heating Blocks
• Right Feed
• Dry ink coding
• 110 volt
• 0-315”/min seal speed
• 8mm seal width
• 11.8” wide conveyor

 

Two in One Bag Sealer Machine! Horizontal / Vertical Configurations with Ink Print Wheel

The CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.

The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.

 

• Sealing Speed: 0-16 m/min
• Sealing Width: 8-10 mm
• Sealing Temperature: 0-300° C
• Film Thickness: ≤.08mm
• Max Bag Weight: ≤ 1kg
• Max Conveyor Weight: ≤ 3kg
• Horizontal Only

Includes:

Band Kit - (10) Teflon Belts (2) Rubber Leading Belts -3000

Band Kit - (10) Teflon Belts (2) Rubber Leading Belts -2500

• Tunnel size (mm) 1000x150x150
• Tunnel size (in) 39.4" x 6" x 6"
• Max.Packing size mm 105 x 350H
• Max.Packing size (in) 4.14"  x 13.78"
• Conveyor motor AC90W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 7KW
• 36 Amps
• Dimension (mm) 1500x350x1500
• Dimension (in) 59"x13.78"x59"
• Dimension from floor to conveyor (adjustable) 23"-28"

The CE-HEAT-IT02 Heat Tunnel is a game-changer for the packaging industry. Its compact size saves valuable space on your production line, only taking up 10 inches. Its impressive height adjustability of 13 inches ensures consistent results for containers of various sizes. With a changeable diffuser, it seamlessly integrates into different container lines, providing versatility and adaptability to your packaging process. Our Heat Tunnel is able to shrink neck bands and full body sleeves up to 120mm in diameter.

Model	Sealing Diameter
CE-905A	20 to 100 mm
CE-905B	15 to 35 mm

Top & Bottom Case Sealer

• Drive: Side Belts
• Minimum Box Size: 7.9"(L) x 5.9"(W) x 4.7"(H)
• Maximum Box Size: 19.6"(L) x 19.6"(W) x 19.6"(H)
• Heavy Duty 200 Watt Motors (2)
• Belt Speed: 59'/ minute (18m/min)
• Power: 110V 60Hz

Top & Bottom Case Sealer

Our industrial-grade semi-automatic box sealers are designed for both small- and large-scale businesses. Well-equipped with powerful, reliable motors and belt systems that are truly made to last, these industrial carton sealers provide clean and uniform seals on boxes small and large. Three heavy-duty motors allow these machines to run safer for longer, while intuitive, easy-to-use functions mean simple operation for your whole staff. Cleveland Equipment provides financing on carton sealers and can ship them to you in as little as 24 hours.

• Drive: Top and Side Belts
• Minimum Box Size: 5.9"(L) x 4.75"(W) x 6.5"(H)
• Maximum Box Size: 27"(W) x 27"(H)
• (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2" Tape Heads (3" Tape Heads Optional)
• Includes 16" Wide Infeed/Outfeed Tables ( Included )
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Switch

Top & Bottom Case Sealer

Cleveland Equipment semi-automatic box sealers are designed to help you save time and money. Adjustable belt systems allow you to tailor the machine to both small and large boxes for clean, uniform seals each and every time. Each carton sealer has a set of powerful, reliable 200 watt motors ( our competitors use under sized 120 watt motors ) and features user-oriented operations to make running it a breeze. Please make note of the breaker switch which is not offered by our competitors. In case of a power surge this will protect the electrical components. Our machines are well-suited for all levels in the packaging industry. We stock our machines so they are available to ship to you within 24 hours.

• Drive: Top and Side Belts
• Minimum Box Size: 5.9"(L) x 4.75"(W) 6.5"(H)
• Maximum Box Size: 19.6"(W) x 19.6"(H)
• (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2" Tape Heads (3" Tape Heads Optional)
• 16" Wide Infeed/Outfeed Tables ( Included )
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Stop

Model	CE-975
voltage	220V 60HZ
Sealing Current	Static 2A / Dynamic 10A
Power	2000W
Capacity	1-30 ft. / min
Sealing Diameter	0.75" to 4.75"
Height of bottles	1.57" to 15.5"
Machine weight	155 lbs
Machine size	61" x 22" x 53" Conveyor height from floor 31.5"

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Automatic takeaway conveyor
• Heavy duty film cradle allows for easy changeovers and adjustments
• Adjustable pin perforator provides air evacuation
• Made in the USA

Top & Bottom Case Sealer

Semi-automatic carton sealers are great to have on hand if you need to pack many boxes of different sizes. With intuitive, easy-to-use functions, these box tapers are fast and efficient to help you save time and money. These smart carton sealers are adjustable and create clean, uniform seals across any carton. Simply and quickly adjust the machine to the width and height of the box you're sealing and it will apply the same amount of tape to each box. They're designed to work best when sealing many boxes of the same size during each product run.

• Drive: Top and Bottom Belts
• Minimum Box Size: 5.9"(L) x 6.5"(W) x 5"(H)
• Maximum Box Size: 19.6"(W) x 19.6"(H)
• 2 Heavy Duty 120 Watt Motors ( Competitors use 90 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2 " Tape Heads (3" Tape Heads optional)
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Stop
• 4 Casters ( Included )
• 16 inch Infeed/Exit Tables ( Included )

Solid Ink Coding Aerating/Air Suction

This single chamber vacuum sealer is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

This single chamber vacuum sealer featuring dual sealing bars, one on each side is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.

Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum

• Speed: Up to 720 Cases/Hour (65 fpm)
• Case Length: 6" minimum – no maximum
• Case Width: 4.75" minimum – 20" maximum
• Case Height: 6" minimum – 20" maximum

The CE-2771 Continuous Duty Air-Cooled Induction Sealing Machine is a contact-less cap sealing system to hermetically seal the top of plastic and glass containers. This sealing process takes place after the container has been filled and capped.

• Seal head system available as a hot knife or hot band depending on your application
• Designed to seal polyolefin or PVC shrink films
• Automatic cycle timing with adjustable dwell time
• 15” wide x 8” tall x 26” long chamber
• Seal size of 16” x 20”
• Maximum film width up to 18”

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

• 20" Hand Operated Impulse Sealer
• Maximum Seal Length: 20 inches
• Max. Seal Thickness: 8 mil
• Seal Width: 3 mil

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!

L-bar sealers use center fold film to protect your products and give them an attractive, professional look. Cleveland Equipment's CEFQL380 L-Bar Sealer is easy to use and to maintain and is an excellent L-sealer for many types of products. Weighing 77 pounds, this machine can handle maximum sealing dimensions of 19.65" x 13.75". It's small enough to set up on a tabletop or desk.

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

CEFS-F450 18" Foot Operated Impulse Sealer

CEFS-F650 26" Foot Operated Impulse Sealer

CEFS-F350 14" Foot Operated Impulse Sealer

• 1/8" Seal width x 20" seal length
• 60 second Adjustable Timers for Heat and Cool
• Electronic Temperature control
• Start button
• Includes 2 standard Tube Racks
• Welded steel case with Powder coat finish

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

Element kit for CEFS-F350 Foot Sealer - 14"

Element kit for CEFS-F450 Foot Sealer - 18"

Element kit for CFES-F650 Foot Sealer - 26"

• 16" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 16 inch(400 mm )
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

• 12" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 12 Inches (300 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

• 8" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 8 inch (200 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 3/16 Inches (5 mm)
• Heat Time: 0-3.5 (sec)

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuatio
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 110v, 220v, or optional 480v
• Made in the USA

 

• • Sealing and shrinking in one station
  • Single person easy operation
  • Economical for low volume production.
  • Power Supply 220V/60Hz, Single Phase.
  • Standard shrink film:  POV, POF, PP
  • Max Package size: 15.75 x 15.75 x 5 in.

Case Length: 6" minimum — 20" maximum

Case Width: 6" minimum — 20" maximum Case

Height: 4.5" minimum — 20" maximum

Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuation
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 220v, or optional 480v 60-80 psi air requirement
• Made in the USA

This machine is widely used in various industries including food, printing, pharmaceutical, electronics, hardware and many other industries that require shrink packaging. It is suitable for use with POF, PE, PVC and other packaging materials.

The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.

• Bottom Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
  * May be able to run smaller boxes with testing
• Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP drive motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• High speed with product indexing
• Hot knife seal bar for consistent and clean seal
• Automatic cycle timing with adjustable dwell time
• HMI controller with simple menus for easy operation
• Multiple pin perforator provides precise air evacuation
• 17”W x 21”L seal area
• Maximum film width up to 22”
• Maximum film roll OD up to 12”
• 80 psi

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Variable speed infeed and outfeed conveyors
• Hot knife seal available with mushroom (standard), pancake, arrow, or poly inserts
• Multiple pin perforators provide air evacuation
• Side seal size 30”, 40” or 50”; front seal size 50”, 70”, or 100”
• Maximum film width up to 60”
• Maximum film roll OD up to 12”
• 60 PSI
• Available in 220v, or 480v
• Made in the USA

The machine features one (1) seal bar that is approx. 10" wide. The open area in the chamber is about 10" x 13.5" (this does not include the area taken up by the seal bar). Simply set the optimal vacuum time, sealing time, cooling time, and sealing temperature for your bags and away you go.

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Adjustable product tray accommodates wide variety of product sizes
• Heavy duty film roll support and simple film loading
• Adjustable pin perforator provides air evacuation
• Seal size of 16” x 22” or 16” x 36”
• Maximum film width up to 19”
• Available in 110v or 220v Made in the USA

 

• Sealing and shrinking in one station
• Single person easy operation
• Economical for low volume production.
• Standard shrink film:  POV, POF, PP
• Max Sealing Size: L 21.65" (550mm) x W 15.75" (400mm)
• Power supply: 220-240V / 50-60Hz, Single Phase - wire only

• Minimum Box Size: 7"(L) x 7"(W) x 4"(H)
• Maximum Box Size: 23.5"(L) x 19.5"(W) x ∞(H)
• Emergency stop switch
• Locking casters
• Air: 1 CFM at 60 PSI
• Electrical: None required
• 1 year on parts

Small to medium sized companies filling non-free-flowing products

• Fill Range:0.5 oz to 10 lbs range
• Output Speed:Up to 600-800 fills/hour*
• Capacity:3.5 cu.ft. product capacity
• Single Head

The model CE-S6 cascading weigh filler is designed to fill harder to run products such as crackers, chips and other non-free-flowing products.

Small to medium sized companies needing high rates of speed, blending products, or integrating with automatic baggers.

• Fill Range: 0.5 oz to 20 lbs range
• Output Speed: Up to 600-1500 fills/hour*
• Capacity:5.1 cu.ft. product capacity
• Dual Heads

The CE-S7 can be set to weigh two completely different products at different weights to easily mix products into a container.

• Construction: Industrial strength 12 gauge steel
• Powder coated for durability
• Conveyor Height: Adj. 27" to 34.6"
• Air Requirements: 80 PSI
• Electrical Requirements: None
• CE Certification

The CE-100 Conveyor is a material transporter that is widely used in dairy, food, veterinary medicine and chemical e.g. Ideal applications are mainly used in transporting powdery, small block and granular material.

• Auger Diameter: 4 inches (100 mm)
• Pitch: 3.14 inches (80 mm)
• Screw Speed: 140 rotations per minute
• Throughput: 105 cubic feet per hour
• Capacity 230L Hopper
• Motor Drive: 1100W Vibrator 68W
• Power Supply 220V 3 phase
• Warranty 1 Year Warranty

Ce-Trulabeler-W1- Wraparound labeler with 10ft conveyor

The CE-VSM1 Variable Speed Mixer is a heavy duty Laboratory mixer with 1/4 HP, totally enclosed, 1 15/1/60, 0-3600 RPM.

CE-15 Automatic inline bottle cleaner machine (conveyor or options included):

The CE-8 Manual Coding Machine is a hot code printer ideal for imprinting date codes, lot numbers, expiration dates, and other letters/numbers into plastic and paper bags.

Similar to the CE-ELFIN-2C.5, this inkjet date code machine can easily glide across most uneven surfaces at a close range. Additionally, it has the ability to print clear identifiers directly onto your product, whether porous or non-porous.

• Printing speed up to 60m/min (200ft/min)
• Resolution up to 600 x 600 dpi
• Supports up to 2 printheads
• Printing on porous or non-porous surface
• Stretchable printhead can accomodate an uneven surface

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):

• Maximum Web Width: 5"
• Maximum Roll Diameter: 8"
• Core Size: 1" or 3” Diameter

• Maximum Web Width: 10”
• Maximum Roll Diameter: 8”
• Core Size: 1" or 3” Diameter

• Full Scrap Rewind
• Label Roll Diameter up to 12”
• Durable All Steel Frame with Powder Coat Finish
• Dispenses Die-cut or Butt-cut Labels
• Accommodates Multiple Labels on a Common Liner 
• Shipping Weight: 13 Lbs.
• Maximum Web Width: 2.5"
• Maximum Roll Diameter: 12"
• Core Size: 1" or 3”

• Infeed Hopper Capacity: 100L
• Dispensing Height: 69"
• Bucket volume: 1.8L
• Bucket size: 16.5" L x 5.5" W x 2.76"H
• Dispersing Height 69"
• Lifting speed 2.5 - 5 cubic meter/hour
• Power 550w Voltage 220v
• Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
• Specification The parts contacted with food are food grade plastic
• Requires Assembly*

Hot Glue Sealing System

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 28"
• Maximum Case Height = 30"*
• FOOTPRINT: 109" L x 68" W x 77.5" H
• Stainless Steel Upgrade Available!

The CE-41C Semi-Automatic Hot Code Printeris great from printing lot numbers, expiration dates, and other info on to plastic bags and other packaging material. The Hot code printer is ideal for imprinting date codes, lot numbers, expiration dates, and other letters/numbers into plastic and paper bags. Character Sets are 1/8” inch in height.

• Simple to operate
• Heavy Duty Construction
• LCD Screen and PLC
• Programmable wrap pattern 
• Single button automatic cycle start
• Emergency stop button
• Variable film carriage speed
• Auto load height photo-eye
• Manual controls

• Max Pallet Size:                  50” W x 50” L x 98” H
• Machine Dimensions:          96.5" L x 59" W x 109.5" H
• App. Shipping Weight:          1,300 Lbs.
• Power Requirements:          120V / 1Ph / 15A Dedicated Service
• Maximum Load Weight:        4000 Lbs

Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)

Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)

Speed – Up to 15 cases a minute

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

Economical Unit for Medium and Small Production Filling

• 7.5 Gallon Hopper
• Fill amount 4oz to 2.5 gal
• Min bottle height 4 in Max 15 inches
• Min bottle opening ½ inch
• Handles from 3 to 30 containers per minute*
• Accepts Free-flowing and low viscosity liquids
• Stainless Steel tank
• Stainless Steel Spouts
• Painted Stand (Stainless Steel Optional)
• Capable of 20+ quarts of water per minute
• Capable of 10+ quarts of syrup per minute
• Capable of 10+ gallons of water per minute
• *Test results based on standard 5 spout machine

*Designed for small boxes

Minimum box size 7 x 3.14 x 3.94
Maximum box size 10 x 7.87 x 7.87
Output is estimated at 12-15 boxes / min.

Small to Medium sized companies moving from hand filling to automated filling of bulk sized cartons and bags

• Fill Range:10 lbs to 75 lbs range
• Output Speed:Up to 300-400 fills/hour*
• Capacity:Bulk filling for weights of up to 75lbs
• Single Head

The CE-S5 semi-automatic scale has automatic tare, automatic feed and speed controls for both bulk and dribble feed rates, and automatic set points.

This inkjet coder printer is an incredibly powerful machine that will print just about anything. The design features independent printheads that are separated from the controller. This enables the code printer to handle either curved or uneven surfaces.

Additionally, these independent printheads allow for multiple combinations of printing. For instance, you can print on a single side, or two sides of your package at the same time. This versatility makes this an ideal inkjet date code printer for those requiring detail.

•  7-inch color touchscreen display
•  Supports up to 4 printheads
•  Printing height up to 2.0″
•  Easy adjustment for down and side printing
•  Printing on porous or non-porous surface
•  Printing speed up to 60m/min (200ft/min)
•  Resolution up to 600 x 600 dpi

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

• Construction Infrared Quartz Heating Tubes
• Capacity 17.717”” W x 9 ¾” H
• Output 0-30ft/min
• Range 0-300 Degrees Celsius
• Dimensions 48”x24”x31”
• Power Supply •220 VAC Single Phase, 60hz, 34amp - Wire Only

• No Tools Required! Hand crank operation
• Fully adjustable unwind tension
• Waste rewind spindle to collect backing paper
• Durable all steel frame with powder coat finish
• Product Size: 1” to 5” Diameter
• Minimum Label Size: 1/2” x 1/2”
• Maximum Label Width: 5”
• Maximum Roll Diameter: 12”
• Core Size Diameter: 1” or 3”

• Multilingual Support
• Support Wifi connection
• Four-wheel Module
• Built-in Encoder
• Built-in Barcode Scanner
• Alignment Tool Included
• Multi-line Printing
• Printable Heights 1~12.7mm

** Ink not included with printer purchase.** 

• Power Supply:110V
• Min Carton size: 9.84 " L x 5.90" W x 3.94” H (250 x 150 x 100 mm)
• Max Carton Size: 21.65 " L x 15.75" W x 15.75” H (550 x 400 x 400 mm)
• Working speed: 12ctns/min
• Machine size: 79"L x 74"W x 57"H
• Machine weight: 990 lbs

• Conveyor speed 0-10m/min
• Max.packaging size 3.15 x 11.4 inches (80x290mm)
• Tunnel size 39.37 x 4 x 12.5 Inches (1000x100x320 mm)
• Max.loading 33lbs (15kg)
• Shrink film POF,PVC,PP

• Speed:          0-10 m/min
• Tunnel Size:  800x400x200 mm
                     31.5 x 15.75 x 7.9 in.
• Load:          5Kg (11 lbs)

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 29"
• Maximum Case Height = 30"*
• FOOTPRINT: 82.5" L x 67" W x 80" H
• Stainless Steel Upgrade Available!

• Up To 12 Cases per Minute!
• Minimum Case Width = 8"
• Maximum Case Width = 22"
• Minimum Case Height = 4"
• Maximum Case Height = 37"*
• Maximum KD Case (L + W) = 44"
• FOOTPRINT: 105" L x 91.75" W x 88.5" H
• Stainless Steel Upgrade Available!

This inkjet coder printer has a particular design, featuring a curved deflection plate along with a spring mechanism. This enables the code printer to print directly onto your product, even if the surface is uneven.

With this design, you can easily guide or stretch the code printer across uneven surfaces at close range. Some popular uses for this inkjet date coder printer are glass bottles or eggs. If specificity is what you require, this might be an excellent consideration for you.

• Independent printhead separated from the controller, suitable for various working environments
• Stretchable printhead can stretch from 0-12mm accommodating an uneven surface
• Printing on porous or non-porous surface
• 5-inch color touchscreen display
• Printing height up to 12.7 mm (0.5″)
• Printing speed up to 60m/min (200ft/min)
• Resolution up to 600 x 600 dpi

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

This bottle capping machine is ideal if you work with pills, coated capsules, or other tablets. And since different types of products require different industrial needs, this capper machine can fill everything from plastic bags to bottles.

Adjust the bottle height if need be, as well as the torque to best suit your preferences. And since this capping equipment is hand-held and sleek in design, it’s simple to use for any purpose. Plus, don’t worry about cap breakage thanks to the rubber on the bottom of the machine.

With convenience and efficiency like this, not to mention a stainless steel and aluminum alloy frame, you can’t go wrong with this bottle capping machine.

Here are some specifics when it comes to this capping equipment, as well as some reviews:

• Cap type: screw cap
• Cap diameter: 30mm ~ 60mm
• Capping speed: 20~30 bottles/ min
• Air pressure requirement: 2~5kg
• Voltage: 110V / 60Hz
• Amperage: 5A
• Power: 180W