Search results for: 'ce gct 18 5 gravity roller conveyor table'
-
The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.
- Available with leg supports in 2 heights;
18-1/4” to 24-1/4” Height
26-1/4” to 32-1/4” Height - 1.9” Dia. Rollers
- Rollers on 3” Centers
- 24” Overall Width
- 21” Between Frame
$578.00 - Available with leg supports in 2 heights;
-
The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.
- Available with leg supports in 2 heights;
18-1/4” to 24-1/4” Height
26-1/4” to 32-1/4” Height - 1.9” Dia. Rollers
- Rollers on 3” Centers
- 24” Overall Width
- 21” Between Frame
$893.00 - Available with leg supports in 2 heights;
-
- Line Speeds up to 25 Carriers per Minute
- Compact Footprint
- Erects 4 or 6 Pack Carriers
- Less Than 5 Minute Change-Over
- Allen Bradley Controls
- 18 SCFM/Cycle @80 PSI
- 110V Electrical
- FOOTPRINT: 39"L x 39"W x 23.5"H
Special Price $15,790.00 Regular Price $18,948.00 -
- Line Speeds up to 25 Carriers per Minute
- Compact Footprint
- Erects 4 or 6 Pack Carriers
- Less Than 5 Minute Change-Over
- Allen Bradley Controls
- 18 SCFM/Cycle @80 PSI
- 110V Electrical
- FOOTPRINT: 39"L x 39"W x 23.5"H
Special Price $26,160.00 Regular Price $31,392.00 -
-
-
-
- Adjustable Guide Rails, Up To 4.5"
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
Available in 6', 8', 10' & 12' lengths.
As low as $4,235.00 -
- Adjustable Guide Rails, Up To 7.5"
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
As low as $4,400.00 -
-
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
As low as $4,620.00 -
- Available in 36", 48" and 60" diameters
- Stainless Steel Construction
- Tool Less Bottle Orienting Guides
- Unscrambler For Up To 1 Gallon Size Container
- Counter And Clockwise Rotation
- Adjustable Height Legs
- Variable Speed Drive For Rotation Speed Control
- UL Certified Components
- Made In The USA
Special Price $4,070.00 Regular Price $4,884.00 -
- Available in 36", 48" and 60" diameters
- Stainless Steel Construction
- Tool Less Bottle Orienting Guides
- Unscrambler For Up To 1 Gallon Size Container
- Counter And Clockwise Rotation
- Adjustable Height Legs
- Variable Speed Drive For Rotation Speed Control
- UL Certified Components
- Made In The USA
Special Price $4,290.00 Regular Price $5,148.00 -
- Top and bottom belt drives
- Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
- PLC controlled
- Adjusted manually for box width by crank handle
- Infeed push-carton conveyor Box height adjustment is motor-driven (up/down movement)
- Locking casters standard
- Easy operation and maintenance
- Built for 24/7 Operation
- Adjustable leg supports
$24,900.00 -
-
- Available in 36", 48" and 60" diameters
- Stainless Steel Construction
- Counter And Clockwise Rotation
- Adjustable Height Legs
- Variable Speed Drive For Rotation Speed Control
- UL Certified Components
- Made In The USA
Special Price $3,905.00 Regular Price $4,686.00 -
- Available in 36", 48" and 60" diameters
- Stainless Steel Construction
- Counter And Clockwise Rotation
- Adjustable Height Legs
- Variable Speed Drive For Rotation Speed Control
- UL Certified Components
- Made In The USA
Special Price $4,125.00 Regular Price $4,950.00 -
Element kit for CEFS-F450 Foot Sealer - 18"$42.00
-
- Infeed Hopper Capacity: 100L
- Dispensing Height: 69"
- Bucket volume: 1.8L
- Bucket size: 16.5" L x 5.5" W x 2.76"H
- Dispersing Height 69"
- Lifting speed 2.5 - 5 cubic meter/hour
- Power 550w Voltage 220v
- Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
- Specification The parts contacted with food are food grade plastic
- Requires Assembly*
Special Price $14,450.00 Regular Price $17,340.00 -
with Ink Print Wheel
Two in One Bag Sealer Machine!
Horizontal / Vertical Configurations with Ink Print WheelThe CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.
The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.
- Stainless steel
- 3/8 in. Seal Width
- Digital Temperature controller
- Speed controlled conveyor
- Counter
- Emergency stop switch
- Ink Print Wheel
- Minimum Vertical Bag Height - 4" with height adj bracket
10" standard unit - Maximum Vertical Bag Height - 10."with height adj bracket
18" standard unit - Optional Stainless Steel Stand ($275)
Special Price $1,295.00 Regular Price $1,554.00 -
-
Maximum Seal Length: 18 inches Max. Seal Thickness: 8mil Seal Width: 5mm
CEFS-F450 18" Foot Operated Impulse SealerSpecial Price $417.00 Regular Price $500.00 -
The CE-100 Conveyor is a material transporter that is widely used in dairy, food, veterinary medicine and chemical e.g. Ideal applications are mainly used in transporting powdery, small block and granular material.
- Auger Diameter: 4 inches (100 mm)
- Pitch: 3.14 inches (80 mm)
- Screw Speed: 140 rotations per minute
- Throughput: 105 cubic feet per hour
- Capacity 230L Hopper
- Motor Drive: 1100W Vibrator 68W
- Power Supply 220V 3 phase
- Warranty 1 Year Warranty
Special Price $9,767.00 Regular Price $11,721.00 -
-
-
This inkjet coder printer has a particular design, featuring a curved deflection plate along with a spring mechanism. This enables the code printer to print directly onto your product, even if the surface is uneven.
With this design, you can easily guide or stretch the code printer across uneven surfaces at close range. Some popular uses for this inkjet date coder printer are glass bottles or eggs. If specificity is what you require, this might be an excellent consideration for you.
- Independent printhead separated from the controller, suitable for various working environments
- Stretchable printhead can stretch from 0-12mm accommodating an uneven surface
- Printing on porous or non-porous surface
- 5-inch color touchscreen display
- Printing height up to 12.7 mm (0.5″)
- Printing speed up to 60m/min (200ft/min)
- Resolution up to 600 x 600 dpi
** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.$3,420.00 -
-
Cleveland machinery manufactures standard conveyors for all our machines as well as custom conveyors for all of our customers. All of our conveyors are manufactured in stainless steel and have tool-less guide rail adjustments. We stock 4.5 and 7.5 inch straight conveyors in 10, 13, 16 and 20 feet lengths.$0.00
-
- Designed to seal most polyolefin, polyethylene, and PVC shrink films
- Live roller or stainless steel mesh belt conveyors
- Available with hot wire or hot knife seal systems
- Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
- Automatic takeaway conveyor
- Heavy duty film cradle allows for easy changeovers and adjustments
- Adjustable pin perforator provides air evacuation
- Made in the USA
As low as $20,700.00 -
- Speed: 0-10 m/min
- Tunnel Size: 800x400x200 mm
31.5 x 15.75 x 7.9 in. - Load: 5Kg (11 lbs)
Special Price $2,179.00 Regular Price $2,555.00 -
- Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
- Max.Packing size 160 x 350H mm (6.29" x 13.78")
- Conveyor motor DC50W/220V
- Conveyor speed 0-10m/min
- Max.loading 15KGS (33 lb)
- Shrink film POF,PVC,PP
- Voltage 220V /60HZ, Single Phase, 9KW
- 36 Amps
- Dimension 1500x400x1520 mm (59" x 15.75" x 60")
- Dimension from floor to conveyor (adjustable) 23"-28"
Special Price $3,488.00 Regular Price $3,986.00 -
- Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
- Max.Packing size 160 x 350H mm (6.29" x 13.78")
- Conveyor motor DC50W/220V
- Conveyor speed 0-10m/min
- Max.loading 15KGS (33 lb)
- Shrink film POF,PVC,PP
- Voltage 220V /60HZ, Single Phase, 9KW
- 36 Amps
- Dimension 1500x400x1520 mm (59" x 15.75" x 60")
- Dimension from floor to conveyor (adjustable) 23"-28"
Special Price $3,488.00 Regular Price $3,986.00 -
-
Pneumatic conveyor small capacity pellet loader kit. Aluminum pneumatic loader with control panel and 1.25" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand. Ideal for feeding plastic extrusion machines and similar applications.
Best for materials that have no dust, such as clean pellets.
$2,725.00 -
- Machine Dimensions 37" L x 27" W x 48" H
- Adjustable Height 37 TO 43 INCHES
- Belt Dimensions 36" L x 3/4" W x 1" H
- Min. Bottle Width 1mm Diameter
- Max. Bottle Width 7” Diameter
- Electrical Requirements 115V / 1PH / 60Hz
Special Price $4,345.00 Regular Price $5,214.00 -
- Machine Dimensions 37" L x 24.5" W x 44" H
- Adjustable Height 35.5 TO 42 INCHES
- Angle Adjustment For Tapered Bottles
- Belt Dimensions 1”H x 36” L x ¾” Thickness
- Min. Bottle Width 1mm Diameter
- Max. Bottle Width 7” Diameter
- Electrical Requirements 115V / 1PH / 60Hz
Special Price $5,005.00 Regular Price $6,006.00 -
- Seal head system available as a hot knife or hot band depending on your application
- Designed to seal polyolefin or PVC shrink films
- Automatic cycle timing with adjustable dwell time
- 15” wide x 8” tall x 26” long chamber
- Seal size of 16” x 20”
- Maximum film width up to 18”
As low as $15,750.00 -
-
-
-
Opening Size: 17.717” W x 9 ¾” H Machine Size: 48”x24”x31”
- Construction Infrared Quartz Heating Tubes
- Capacity 17.717”” W x 9 ¾” H
- Output 0-30ft/min
- Range 0-300 Degrees Celsius
- Dimensions 48”x24”x31”
- Power Supply •220 VAC Single Phase, 60hz, 34amp - Wire Only
Special Price $2,357.00 Regular Price $2,987.00 -
Special Price $11,877.00 Regular Price $14,253.00 -
with Emboss/Imprint Wheel
Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!
If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.
What is a Continuous Sealer?
A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes.
Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages.
This results in a safer operation, since there is less potential for human error.
If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.
Benefits of a Conveyor Heat Sealer
Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.
Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate.
The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal.
Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.
Special Price $987.00 Regular Price $1,184.00 -
- Designed to shrink most polyolefin, polyethylene, and PVC shrink films
- Live roller or stainless steel mesh belt conveyors; optional “dead” roller conveyor for polyethylene
- Four-directional air flow provides positive shrinking
- Variable air flow and air velocity for a variety of products and applications
- Bottom air flow adjustment – full on, ½ on, full off on ET2010
- Conveyor speed up to 67 feet per minute
- Available in 220v – single or 3-phase
- Made in the USA
As low as $9,000.00 -
Top & Bottom Case Sealer
Semi-automatic carton sealers are great to have on hand if you need to pack many boxes of different sizes. With intuitive, easy-to-use functions, these box tapers are fast and efficient to help you save time and money. These smart carton sealers are adjustable and create clean, uniform seals across any carton. Simply and quickly adjust the machine to the width and height of the box you're sealing and it will apply the same amount of tape to each box. They're designed to work best when sealing many boxes of the same size during each product run.
- Drive: Top and Bottom Belts
- Minimum Box Size: 5.9"(L) x 6.5"(W) x 5"(H)
- Maximum Box Size: 19.6"(W) x 19.6"(H)
- 2 Heavy Duty 120 Watt Motors ( Competitors use 90 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2 " Tape Heads (3" Tape Heads optional)
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Stop
- 4 Casters ( Included )
- 16 inch Infeed/Exit Tables ( Included )
As low as $2,395.00 -
Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):$18,285.00
-
Special Price $20,100.00 Regular Price $24,120.00
-
- Minimum Label Size: 1/2" x 1/2"
- Maximum Label Size: 5" x 5"
- Maximum Roll Diameter: 12"
- Core Size: 1" or 3"
- Shipping Weight: 45 pounds
- Air Requirements: 60PSI
- Electrical Requirements: 115VAC. 60HZ.
Special Price $6,850.00 Regular Price $8,220.00 -
- No Tools Required! Hand crank operation
- Fully adjustable unwind tension
- Waste rewind spindle to collect backing paper
- Durable all steel frame with powder coat finish
- Product Size: 1” to 5” Diameter
- Minimum Label Size: 1/2” x 1/2”
- Maximum Label Width: 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
Special Price $795.00 Regular Price $954.00 -
- Sealing Speed: 0-16 m/min
- Sealing Width: 8-10 mm
- Sealing Temperature: 0-300° C
- Film Thickness: ≤.08mm
- Max Bag Weight: ≤ 1kg
- Max Conveyor Weight: ≤ 3kg
- Horizontal Only
Special Price $2,745.00 Regular Price $3,294.00 -
CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.
- Stainless Steel Construction
- Digital Thermostat (not shown)
- Product Counter (not shown)
- 1/2 HP Motor
- 2 Sets of Heating Blocks
- Right Feed
- Dry ink coding
- 110 volt
- 0-315”/min seal speed
- 8mm seal width
- 11.8” wide conveyor
$4,838.00 -
- Scrap rewind for quick start and removal of waste liner
- Full scrap rewind feature
- Durable all steel frame with powder coat finish
- Footswitch activated
- Accuracy +/- 1/16”
- Minimum Label Size: 1/2 x 1/2”
- Maximum Label Size: 5” x 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
Special Price $4,698.00 Regular Price $5,638.00 -
- No Tools Required
- Made in the USA
- Fully adjustable unwind tension
- Waste rewind spindle to collect backing paper
- Durable all steel frame with powder coat finish
- Product Size: 1” to 5” Diameter*
- Minimum Label Size: 1” x 1”
- Maximum Label Width: 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
Special Price $2,298.00 Regular Price $2,758.00 -
Ce-Trulabeler-W1- Wraparound labeler with 10ft conveyor$24,270.00
-
- Side Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
The SB-EX Case Taper system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.As low as $5,150.00 -
-
- Sealing and shrinking in one station
- Single person easy operation
- Economical for low volume production.
- Power Supply 220V/60Hz, Single Phase.
- Standard shrink film: POV, POF, PP
- Max Package size: 15.75 x 15.75 x 5 in.
Special Price $2,729.00 Regular Price $2,998.00 -
-
- Tunnel size (mm) 1000x150x150
- Tunnel size (in) 39.4" x 6" x 6"
- Max.Packing size mm 105 x 350H
- Max.Packing size (in) 4.14" x 13.78"
- Conveyor motor AC90W/220V
- Conveyor speed 0-10m/min
- Max.loading 15KGS
- Shrink film POF,PVC,PP
- Voltage 220V /60HZ, Single Phase, 7KW
- 36 Amps
- Dimension (mm) 1500x350x1500
- Dimension (in) 59"x13.78"x59"
- Dimension from floor to conveyor (adjustable) 23"-28"
Special Price $3,488.00 Regular Price $3,986.00 -
- Minimum Label Size: 1/2" x 1/2"
- Maximum Label Size: 5" x 15"
- Maximum Roll Diameter: 12"
- Core Size: 1" or 3"
- Shipping weight: 45 pounds
- Electrical Requirements: 115VAC. 60HZ.,
- 500" Per Minute
Special Price $5,798.00 Regular Price $6,958.00 -
Model CE-975 voltage 220V 60HZ Sealing Current Static 2A / Dynamic 10A Power 2000W Capacity 1-30 ft. / min Sealing Diameter 0.75" to 4.75" Height of bottles 1.57" to 15.5" Machine weight 155 lbs Machine size 61" x 22" x 53" Conveyor height from floor 31.5" Special Price $4,259.00 Regular Price $4,870.80 -
Top & Bottom Case Sealer
Our industrial-grade semi-automatic box sealers are designed for both small- and large-scale businesses. Well-equipped with powerful, reliable motors and belt systems that are truly made to last, these industrial carton sealers provide clean and uniform seals on boxes small and large. Three heavy-duty motors allow these machines to run safer for longer, while intuitive, easy-to-use functions mean simple operation for your whole staff. Cleveland Equipment provides financing on carton sealers and can ship them to you in as little as 24 hours.
- Drive: Top and Side Belts
- Minimum Box Size: 5.9"(L) x 4.75"(W) x 6.5"(H)
- Maximum Box Size: 27"(W) x 27"(H)
- (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2" Tape Heads (3" Tape Heads Optional)
- Includes 16" Wide Infeed/Outfeed Tables ( Included )
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Switch
As low as $4,077.00 -
Top & Bottom Case Sealer
Cleveland Equipment semi-automatic box sealers are designed to help you save time and money. Adjustable belt systems allow you to tailor the machine to both small and large boxes for clean, uniform seals each and every time. Each carton sealer has a set of powerful, reliable 200 watt motors ( our competitors use under sized 120 watt motors ) and features user-oriented operations to make running it a breeze. Please make note of the breaker switch which is not offered by our competitors. In case of a power surge this will protect the electrical components. Our machines are well-suited for all levels in the packaging industry. We stock our machines so they are available to ship to you within 24 hours.
- Drive: Top and Side Belts
- Minimum Box Size: 5.9"(L) x 4.75"(W) 6.5"(H)
- Maximum Box Size: 19.6"(W) x 19.6"(H)
- (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2" Tape Heads (3" Tape Heads Optional)
- 16" Wide Infeed/Outfeed Tables ( Included )
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Stop
As low as $2,895.00 -
Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximumSpecial Price $24,500.00 Regular Price $32,340.00 -
- Maximum Web Width: 5"
- Maximum Roll Diameter: 8"
- Core Size: 1" or 3” Diameter
Special Price $59.00 Regular Price $70.00 -
Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)
Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)
Speed – Up to 15 cases a minute
$43,250.00 -
Eastey's SB-EX Stainless Steel Case Taper offers the quality that you have come to rely on from Eastey. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.
- Side Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
- Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
-
CE-15 Automatic inline bottle cleaner machine (conveyor or options included):$31,375.00
-
Economical Unit for Medium and Small Production Filling
- 7.5 Gallon Hopper
- Fill amount 4oz to 2.5 gal
- Min bottle height 4 in Max 15 inches
- Min bottle opening ½ inch
- Handles from 3 to 30 containers per minute*
- Accepts Free-flowing and low viscosity liquids
- Stainless Steel tank
- Stainless Steel Spouts
- Painted Stand (Stainless Steel Optional)
- Capable of 20+ quarts of water per minute
- Capable of 10+ quarts of syrup per minute
- Capable of 10+ gallons of water per minute
- *Test results based on standard 5 spout machine
$4,695.00 -
The BB-2 Bottom Belt Stainless Steel Industrial Case Taper is a cost-effective top and bottom case taper designed for large run case sealing. The BB-2 utilizes pressure-sensitive tape and features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes.
- Bottom Belt Drive
- wash-down NEMA 4
- Includes 1 pack table
- Minimum Box Size: 5"(L) x 6"(W) x 4"(H)
- Maximum Box Size: ∞"(L) x 21"(W) x 20.5"(H)
- Single drive motor
- Tape Speed: 30 cases/min
- Belt Speed: 60ft/min
- Power Supply 110 VAC, 60Hz, 6A
-
- All Steel Frame Construction.
- Open vertical peel edge will not trap labels and allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 22 lbs.
- Max label width: 2.5"
- Max roll diameter: 12"
- Core size: 1" or 3"
Special Price $613.00 Regular Price $735.00 -
Pneumatic Conveyor Coffer Load Kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, 2" inlet. Includes control panel and 15' grounded flexible hose, 36" aluminum pick-up wand.
Best for coffee beans, grains, seeds, other similar organic materials.
$7,035.00 -
Top & Bottom Case Sealer
- Drive: Side Belts
- Minimum Box Size: 7.9"(L) x 5.9"(W) x 4.7"(H)
- Maximum Box Size: 19.6"(L) x 19.6"(W) x 19.6"(H)
- Heavy Duty 200 Watt Motors (2)
- Belt Speed: 59'/ minute (18m/min)
- Power: 110V 60Hz
As low as $6,379.00 -
Minimum Box 5” (L) x 3.14 (W) x 1.57” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!Special Price $4,495.00 Regular Price $5,394.00 -
Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!Special Price $3,895.00 Regular Price $4,674.00 -
- All Steel Frame Construction.
- Open vertical peel edge will not trap labels
- Allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 24 lbs.
- Max label width: 4.5"
- Max roll diameter: 12"
- Core size: 1" or 3"
Special Price $698.00 Regular Price $835.00 -
This inkjet date code printer is compact and lightweight. And because of this, it boasts a design that is easy to use, not to mention cost effective. Whether coding on primary or secondary packaging, this inkjet date code printer can streamline your efforts.
Additionally, this inkjet date code printer can print on both porous and non-porous surfaces. This makes it the ideal code printer for just about any printing applications across a variety of industries.
- Independent printhead separated from the controller
- 5-inch color touchscreen display
- Printing on porous or non-porous surface
- Controller stores up to 500 messages internally
- Printing height up to 12 mm (0.5″)
- Printing speed up to 60 m/min (200 ft/min)
- Resolution up to 600 x 600 dpi
** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.$2,300.00 -
- All Steel Frame Construction.
- Standard Photo Cell
- Open vertical peel edge will not trap labels and allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 26 lbs.
- Max label width: 7.5"
- Max roll diameter: 12"
- Core size: 3"
Special Price $859.00 Regular Price $1,030.00 -
- Speed: Up to 720 Cases/Hour (65 fpm)
- Case Length: 6" minimum – no maximum
- Case Width: 4.75" minimum – 20" maximum
- Case Height: 6" minimum – 20" maximum
Special Price $7,900.00 Regular Price $10,428.00 -
- Construction: Industrial strength 12 gauge steel
- Powder coated for durability
- Conveyor Height: Adj. 27" to 34.6"
- Air Requirements: 80 PSI
- Electrical Requirements: None
- CE Certification
Special Price $7,450.00 Regular Price $8,940.00 -
The CE-HEAT-IT02 Heat Tunnel is a game-changer for the packaging industry. Its compact size saves valuable space on your production line, only taking up 10 inches. Its impressive height adjustability of 13 inches ensures consistent results for containers of various sizes. With a changeable diffuser, it seamlessly integrates into different container lines, providing versatility and adaptability to your packaging process. Our Heat Tunnel is able to shrink neck bands and full body sleeves up to 120mm in diameter.Special Price $10,835.00 Regular Price $11,820.00
-
Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbsSpecial Price $4,850.00 Regular Price $6,402.00 -
Small to Medium sized companies moving from hand filling to automated filling of bulk sized cartons and bags
- Fill Range:10 lbs to 75 lbs range
- Output Speed:Up to 300-400 fills/hour*
- Capacity:Bulk filling for weights of up to 75lbs
- Single Head
bulk • nuts • pet foods • seeds • grains • food addimentsThe CE-S5 semi-automatic scale has automatic tare, automatic feed and speed controls for both bulk and dribble feed rates, and automatic set points.
Special Price $6,950.00 Regular Price $8,340.00 -
The side belt driven Easy Packer is designed for compact, packing and sealing. The durable design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum. The Easy Packer provides a fast and cost-efficient alternative to hand taping.
- Side Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
- * May be able to run smaller boxes with testing
- Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP motors
- Tape Speed: 20 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
As low as $8,950.00 -
- Conveyor speed 0-10m/min
- Max.packaging size 3.15 x 11.4 inches (80x290mm)
- Tunnel size 39.37 x 4 x 12.5 Inches (1000x100x320 mm)
- Max.loading 33lbs (15kg)
- Shrink film POF,PVC,PP
Special Price $6,750.00 Regular Price $8,800.00 -
Eastey's SB-EX Random allows users to run a variety of case sizes without having to manually adjust for each box. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.
Machine Dimensions:- (L) 46in (1160mm)
- (W) 40.6in (1030mm)
- (H) 61in (1550Dimensions for SBEX Fully Auto
- (L) 46in (1160mm)
- (W) 40.6in (1030mm)
- (H) 61in (1550mmmm
- Top & Bottom Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: ∞"(L) x 23"(W) x 23"(H)
- Dual 1/4 HP drive motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
As low as $10,300.00 -
Similar to the CE-ELFIN-2C.5, this inkjet date code machine can easily glide across most uneven surfaces at a close range. Additionally, it has the ability to print clear identifiers directly onto your product, whether porous or non-porous.
- Printing speed up to 60m/min (200ft/min)
- Resolution up to 600 x 600 dpi
- Supports up to 2 printheads
- Printing on porous or non-porous surface
- Stretchable printhead can accomodate an uneven surface
** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.$4,750.00 -
This machine is widely used in various industries including food, printing, pharmaceutical, electronics, hardware and many other industries that require shrink packaging. It is suitable for use with POF, PE, PVC and other packaging materials.$12,495.00
-
Model Sealing Diameter CE-905A 20 to 100 mm CE-905B 15 to 35 mm Special Price $545.00 Regular Price $654.00 -
Machine specification: Power 150W Max. packing size (mm) Φ4.7 x 13.8H Size of shrink tunnel (in) 53.1 x 7.1 x 15in Capacity 5,000~15,000B/H$10,545.00
-
Top & Bottom Case Sealer
- Speed: Up to 2,400 Cases/Hour (65 fpm)
- Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
- Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
- Electrical: 110VAC-1PH-60Hz – 10 Amps
- Air: None
- Casters are included in the standard unit.
- Dimensions: 51.5"L x 38"W x 56"H
Special Price $5,159.00 Regular Price $6,191.00 -
The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.
- Bottom Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP drive motors
- Tape Speed: 20 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
As low as $11,900.00 -
For Extra Large Boxes
Top & Bottom Case Sealer
- Speed: Up to 2,400 Cases/Hour (65 fpm)
- Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
- Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
- Electrical: 110VAC-1PH-60Hz – 10 Amps
- Air: None
- Casters are included in the standard unit.
- Dimensions: 51.5"L x 38"W x 56"H
Special Price $5,325.00 Regular Price $7,030.00