Search results for: 'conveyor belt for ce 1120ld'

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Designed to shrink most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors; optional “dead” roller conveyor for polyethylene
• Four-directional air flow provides positive shrinking
• Variable air flow and air velocity for a variety of products and applications
• Bottom air flow adjustment – full on, ½ on, full off on ET2010
• Conveyor speed up to 67 feet per minute
• Available in 220v – single or 3-phase
• Made in the USA

Includes:

• Tunnel size (mm) 1000x150x150
• Tunnel size (in) 39.4" x 6" x 6"
• Max.Packing size mm 105 x 350H
• Max.Packing size (in) 4.14"  x 13.78"
• Conveyor motor AC90W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 7KW
• 36 Amps
• Dimension (mm) 1500x350x1500
• Dimension (in) 59"x13.78"x59"
• Dimension from floor to conveyor (adjustable) 23"-28"

The CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.

The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.

Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum

The side belt driven Easy Packer is designed for compact, packing and sealing. The durable design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum. The Easy Packer provides a fast and cost-efficient alternative to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• * May be able to run smaller boxes with testing
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• 25” wide hot knife seal provides a consistent “bulls-eye”closure
• Upper and lower powered film unwind for smooth feed of film
• 12” product pass through height accommodates 11” tall product
• Self tracking conveyor belt and product indexing 34.75” conveyor height
• Siemens PLC touchscreen with full color HMI
• 25” max film width
• 14” max film OD
• 220V standard; optional 480V
• Requires 60 psi; 3.5 cfm

Pneumatic Conveyor Coffer Load Kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, 2" inlet. Includes control panel and 15' grounded flexible hose, 36" aluminum pick-up wand.

Best for coffee beans, grains, seeds, other similar organic materials.

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Construction: Industrial strength 12 gauge steel
• Powder coated for durability
• Conveyor Height: Adj. 27" to 34.6"
• Air Requirements: 80 PSI
• Electrical Requirements: None
• CE Certification

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

Case Length: 6" minimum — 20" maximum

Case Width: 6" minimum — 20" maximum Case

Height: 4.5" minimum — 20" maximum

Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps

• Construction Infrared Quartz Heating Tubes
• Capacity 17.717”” W x 9 ¾” H
• Output 0-30ft/min
• Range 0-300 Degrees Celsius
• Dimensions 48”x24”x31”
• Power Supply •220 VAC Single Phase, 60hz, 34amp - Wire Only

• Seal head system available as a hot knife or hot band depending on your application
• Designed to seal polyolefin or PVC shrink films
• Automatic cycle timing with adjustable dwell time
• 15” wide x 8” tall x 26” long chamber
• Seal size of 16” x 20”
• Maximum film width up to 18”

• Sealing Speed: 0-16 m/min
• Sealing Width: 8-10 mm
• Sealing Temperature: 0-300° C
• Film Thickness: ≤.08mm
• Max Bag Weight: ≤ 1kg
• Max Conveyor Weight: ≤ 3kg
• Horizontal Only

• Speed: Up to 720 Cases/Hour (65 fpm)
• Case Length: 6" minimum – no maximum
• Case Width: 4.75" minimum – 20" maximum
• Case Height: 6" minimum – 20" maximum

• Conveyor speed 0-10m/min
• Max.packaging size 3.15 x 11.4 inches (80x290mm)
• Tunnel size 39.37 x 4 x 12.5 Inches (1000x100x320 mm)
• Max.loading 33lbs (15kg)
• Shrink film POF,PVC,PP

• • Sealing and shrinking in one station
  • Single person easy operation
  • Economical for low volume production.
  • Power Supply 220V/60Hz, Single Phase.
  • Standard shrink film:  POV, POF, PP
  • Max Package size: 15.75 x 15.75 x 5 in.

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 29"
• Maximum Case Height = 30"*
• FOOTPRINT: 82.5" L x 67" W x 80" H
• Stainless Steel Upgrade Available!

• Up To 12 Cases per Minute!
• Minimum Case Width = 8"
• Maximum Case Width = 22"
• Minimum Case Height = 4"
• Maximum Case Height = 37"*
• Maximum KD Case (L + W) = 44"
• FOOTPRINT: 105" L x 91.75" W x 88.5" H
• Stainless Steel Upgrade Available!

• Power - 220V/60Hz, Single Phase
• Draw - 41amps
• Tunnel size - 47" x 17.717”" x 13.75"
• Overall size - 63" x 23." x 51.2"
• Maximum load on conveyor - 11 lbs.

Pneumatic conveyor powder loader kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, control panel and 2" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand.

Best for powders or very dusty materials.

• Power Supply:110V
• Min Carton size: 9.84 " L x 5.90" W x 3.94” H (250 x 150 x 100 mm)
• Max Carton Size: 21.65 " L x 15.75" W x 15.75” H (550 x 400 x 400 mm)
• Working speed: 12ctns/min
• Machine size: 79"L x 74"W x 57"H
• Machine weight: 990 lbs

• Heavy duty stainless steel frame
• Accommodate a wide range of containers.
• Manual adjustable height for cap tightener head.
• Cad designed, CNC manufactured, thoroughly tested
• Omron PLC for all machine logic functions
• Frequency control drive for conveyor speed
• Front panel START and Emergency STOP for easy access.
• Front panel binary code for changing cap time torque.

Small to medium sized companies filling non-free-flowing products

• Fill Range:0.5 oz to 10 lbs range
• Output Speed:Up to 600-800 fills/hour*
• Capacity:3.5 cu.ft. product capacity
• Single Head

The model CE-S6 cascading weigh filler is designed to fill harder to run products such as crackers, chips and other non-free-flowing products.

Small to medium sized companies needing high rates of speed, blending products, or integrating with automatic baggers.

• Fill Range: 0.5 oz to 20 lbs range
• Output Speed: Up to 600-1500 fills/hour*
• Capacity:5.1 cu.ft. product capacity
• Dual Heads

The CE-S7 can be set to weigh two completely different products at different weights to easily mix products into a container.

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Adjustable product tray accommodates wide variety of product sizes
• Heavy duty film roll support and simple film loading
• Adjustable pin perforator provides air evacuation
• Seal size of 16” x 22” or 16” x 36”
• Maximum film width up to 19”
• Available in 110v or 220v Made in the USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Variable speed infeed and outfeed conveyors
• Hot knife seal available with mushroom (standard), pancake, arrow, or poly inserts
• Multiple pin perforators provide air evacuation
• Side seal size 30”, 40” or 50”; front seal size 50”, 70”, or 100”
• Maximum film width up to 60”
• Maximum film roll OD up to 12”
• 60 PSI
• Available in 220v, or 480v
• Made in the USA

Similar to the CE-ELFIN-2C.5, this inkjet date code machine can easily glide across most uneven surfaces at a close range. Additionally, it has the ability to print clear identifiers directly onto your product, whether porous or non-porous.

• Printing speed up to 60m/min (200ft/min)
• Resolution up to 600 x 600 dpi
• Supports up to 2 printheads
• Printing on porous or non-porous surface
• Stretchable printhead can accomodate an uneven surface

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

• Maximum Web Width: 5"
• Maximum Roll Diameter: 8"
• Core Size: 1" or 3” Diameter

• Maximum Web Width: 10”
• Maximum Roll Diameter: 8”
• Core Size: 1" or 3” Diameter

• Full Scrap Rewind
• Label Roll Diameter up to 12”
• Durable All Steel Frame with Powder Coat Finish
• Dispenses Die-cut or Butt-cut Labels
• Accommodates Multiple Labels on a Common Liner 
• Shipping Weight: 13 Lbs.
• Maximum Web Width: 2.5"
• Maximum Roll Diameter: 12"
• Core Size: 1" or 3”

Hot Glue Sealing System

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 28"
• Maximum Case Height = 30"*
• FOOTPRINT: 109" L x 68" W x 77.5" H
• Stainless Steel Upgrade Available!

Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.

• Feed Direction
  • Right to Left
  • Left to Right
    
    
• Seal Width
  • 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
    
    
• Sealing Capacity
  • 6 mil single thickness gusseted bags
  • 12 mil single thickness flat bags
    
    
• Temperature Control
  • 600 ± 2 ºF
    
    
• Speed
  • Variable speed up to 750 inches per minute

The CE-41C Semi-Automatic Hot Code Printeris great from printing lot numbers, expiration dates, and other info on to plastic bags and other packaging material. The Hot code printer is ideal for imprinting date codes, lot numbers, expiration dates, and other letters/numbers into plastic and paper bags. Character Sets are 1/8” inch in height.

• Simple to operate
• Heavy Duty Construction
• LCD Screen and PLC
• Programmable wrap pattern 
• Single button automatic cycle start
• Emergency stop button
• Variable film carriage speed
• Auto load height photo-eye
• Manual controls

• Max Pallet Size:                  50” W x 50” L x 98” H
• Machine Dimensions:          96.5" L x 59" W x 109.5" H
• App. Shipping Weight:          1,300 Lbs.
• Power Requirements:          120V / 1Ph / 15A Dedicated Service
• Maximum Load Weight:        4000 Lbs

Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)

Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)

Speed – Up to 15 cases a minute