Search results for: 'piston gear fillers sgp dual head series'

Our piston filling machines are the ideal jar filling equipment for liquid fill and paste filling applications.

0.34 - 2.0 oz / 10ml - 60ml

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• (Min) 5ml - (Max)10 Liters Per Head Each Nozzle Fills quantity of 35 , 1-Oz bottles of water in 60 seconds

1.5 - 8.5 oz / 45ml - 250ml

18.5 - 169.0 oz / 550ml - 5000ml

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel – Food Grade Standard
• Seals: Buna – Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8”
• Spring Stainless – Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Buna / Nitrile Seal Kit

4.0 - 33.5 oz / 120ml - 1000ml

1.5 - 8.5 oz / 45ml - 250ml

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard (See Separate List for Sizing)
• Tubing: Silicone 7/16 Inch OD
• Valve: ¼"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

18.5 - 169.0 oz / 500ml - 5000ml

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

FG-1000 Gear Filler

The SQY Series direct draw piston fillers are tabletop volumetric semi-automatic piston filling equipment used for liquid and paste products with low or high viscosity.

SGP Series Single Head Viton Seal Kit

SGY Series Dual Head Viton Seal Kit

SGP Series Single Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

SGP Series Dual Head Viton Seal Kit

1.0 - 3.5 oz / 30ml - 100ml

3.5 - 33.5 oz / 100ml - 1000ml

18.5 - 169.0 oz / 500ml - 5000ml

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

SGY Series Dual Head Buna / Nitrile Seal Kit

Hopper for SGP Series, 3 gal.

Hopper for SGP Series, 5 gal.

Hopper for SGP Series, 8 gal.

Hopper for SGP Series, 15 gal.

Hopper for SGP Series, 22 gal.

Heated Hopper for SGP Series, 8 gal.

Hopper Lid for SGP Series, 3 gal.

Hopper Lid for SGP Series, 5 gal.

Hopper Lid for SGP Series, 8 gal.

Hopper Lid for SGP Series, 15 gal.

Hopper with Mixer for SGP Series, 8 gal.

Hopper with Mixer for SGP Series, 22 gal.

Heated Hopper with Mixer for SGP Series, 4.5 gal.

SGY Series Single Head Viton Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

SGP Series Single Head Viton Seal Kit

Small to medium sized companies needing high rates of speed, blending products, or integrating with automatic baggers.

• Fill Range: 0.5 oz to 20 lbs range
• Output Speed: Up to 600-1500 fills/hour*
• Capacity:5.1 cu.ft. product capacity
• Dual Heads

The CE-S7 can be set to weigh two completely different products at different weights to easily mix products into a container.

• Seal head system available as a hot knife or hot band depending on your application
• Designed to seal polyolefin or PVC shrink films
• Automatic cycle timing with adjustable dwell time
• 15” wide x 8” tall x 26” long chamber
• Seal size of 16” x 20”
• Maximum film width up to 18”

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Adjustable product tray accommodates wide variety of product sizes
• Heavy duty film roll support and simple film loading
• Adjustable pin perforator provides air evacuation
• Seal size of 16” x 22” or 16” x 36”
• Maximum film width up to 19”
• Available in 110v or 220v Made in the USA

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, arrow, or poly inserts
• Automatic takeaway conveyor
• Heavy duty film cradle allows for easy changeovers and adjustments
• Adjustable pin perforator provides air evacuation
• Made in the USA

• Designed to seal most polyolefin, polyethylene, and PVC* shrink films
• Available with hot wire or hot knife seal systems
• Hot knife seal systems available with mushroom (standard), pancake, or arrow inserts
• Adjustable pin perforator provides air evacuatio
• Side seal size from 20” – 50”; front seal size from 16” – 100”
• Maximum film width up to 44”
• Maximum film roll OD up to 12”; 10” with power unwind
• Available in 110v, 220v, or optional 480v
• Made in the USA

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

SGY Series Single Head Buna / Nitrile Seal Kit

Similar to the CE-ELFIN-2C.5, this inkjet date code machine can easily glide across most uneven surfaces at a close range. Additionally, it has the ability to print clear identifiers directly onto your product, whether porous or non-porous.

• Printing speed up to 60m/min (200ft/min)
• Resolution up to 600 x 600 dpi
• Supports up to 2 printheads
• Printing on porous or non-porous surface
• Stretchable printhead can accomodate an uneven surface

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

Small to medium sized companies filling non-free-flowing products

• Fill Range:0.5 oz to 10 lbs range
• Output Speed:Up to 600-800 fills/hour*
• Capacity:3.5 cu.ft. product capacity
• Single Head

The model CE-S6 cascading weigh filler is designed to fill harder to run products such as crackers, chips and other non-free-flowing products.

Stainless Upgrade & Sanitary Clamps for Siphon Filler

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• High speed with product indexing
• Hot knife seal bar for consistent and clean seal
• Automatic cycle timing with adjustable dwell time
• HMI controller with simple menus for easy operation
• Multiple pin perforator provides precise air evacuation
• 17”W x 21”L seal area
• Maximum film width up to 22”
• Maximum film roll OD up to 12”
• 80 psi

This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• Variable speed infeed and outfeed conveyors
• Hot knife seal available with mushroom (standard), pancake, arrow, or poly inserts
• Multiple pin perforators provide air evacuation
• Side seal size 30”, 40” or 50”; front seal size 50”, 70”, or 100”
• Maximum film width up to 60”
• Maximum film roll OD up to 12”
• 60 PSI
• Available in 220v, or 480v
• Made in the USA

• Designed to seal most polyolefin, polyethylene, and PVC shrink films
• 25” wide hot knife seal provides a consistent “bulls-eye”closure
• Upper and lower powered film unwind for smooth feed of film
• 12” product pass through height accommodates 11” tall product
• Self tracking conveyor belt and product indexing 34.75” conveyor height
• Siemens PLC touchscreen with full color HMI
• 25” max film width
• 14” max film OD
• 220V standard; optional 480V
• Requires 60 psi; 3.5 cfm

• Designed to shrink most polyolefin, polyethylene, and PVC shrink films
• Live roller or stainless steel mesh belt conveyors; optional “dead” roller conveyor for polyethylene
• Four-directional air flow provides positive shrinking
• Variable air flow and air velocity for a variety of products and applications
• Bottom air flow adjustment – full on, ½ on, full off on ET2010
• Conveyor speed up to 67 feet per minute
• Available in 220v – single or 3-phase
• Made in the USA

Economical Unit for Medium and Small Production Filling

• 7.5 Gallon Hopper
• Fill amount 4oz to 2.5 gal
• Min bottle height 4 in Max 15 inches
• Min bottle opening ½ inch
• Handles from 3 to 30 containers per minute*
• Accepts Free-flowing and low viscosity liquids
• Stainless Steel tank
• Stainless Steel Spouts
• Painted Stand (Stainless Steel Optional)
• Capable of 20+ quarts of water per minute
• Capable of 10+ quarts of syrup per minute
• Capable of 10+ gallons of water per minute
• *Test results based on standard 5 spout machine

Small to Medium sized companies moving from hand filling to automated filling of bulk sized cartons and bags

• Fill Range:10 lbs to 75 lbs range
• Output Speed:Up to 300-400 fills/hour*
• Capacity:Bulk filling for weights of up to 75lbs
• Single Head

The CE-S5 semi-automatic scale has automatic tare, automatic feed and speed controls for both bulk and dribble feed rates, and automatic set points.

• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

• Adjustable Guide Rails, Up To 7.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):

The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.

• Bottom Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
  * May be able to run smaller boxes with testing
• Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP drive motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

• Filling Range 10–5000 ml
• Filling Accuracy ± 1 %
• Power Supply 110v; 50/60 Hz; Single phase
• Driven Device DC Motor
• Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)

• Adjustable Guide Rails, Up To 4.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

Available in 6', 8', 10' & 12' lengths.

Small Fill Head Reducer 10x150

Medium Fill Head Reducer 12x150

Medium Fill Head Reducer 18x30

Large Fill Head Reducer 20x25

Large Fill Head Reducer 42x25

• Heavy duty stainless steel frame
• Accommodate a wide range of containers.
• Manual adjustable height for cap tightener head.
• Cad designed, CNC manufactured, thoroughly tested
• Omron PLC for all machine logic functions
• Frequency control drive for conveyor speed
• Front panel START and Emergency STOP for easy access.
• Front panel binary code for changing cap time torque.

Eastey's SB-EX Random allows users to run a variety of case sizes without having to manually adjust for each box. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

Machine Dimensions: