Search results for: 'upper heating block shaft'

• Construction Infrared Quartz Heating Tubes
• Capacity 17.717”” W x 9 ¾” H
• Output 0-30ft/min
• Range 0-300 Degrees Celsius
• Dimensions 48”x24”x31”
• Power Supply •220 VAC Single Phase, 60hz, 34amp - Wire Only

• 12" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 12 Inches (300 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

• 8" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 8 inch (200 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 3/16 Inches (5 mm)
• Heat Time: 0-3.5 (sec)

• 16" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 16 inch(400 mm )
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

• • Sealing and shrinking in one station
  • Single person easy operation
  • Economical for low volume production.
  • Power Supply 220V/60Hz, Single Phase.
  • Standard shrink film:  POV, POF, PP
  • Max Package size: 15.75 x 15.75 x 5 in.

• Speed:          0-10 m/min
• Tunnel Size:  800x400x200 mm
                     31.5 x 15.75 x 7.9 in.
• Load:          5Kg (11 lbs)

• Tunnel size (mm) 1000x150x150
• Tunnel size (in) 39.4" x 6" x 6"
• Max.Packing size mm 105 x 350H
• Max.Packing size (in) 4.14"  x 13.78"
• Conveyor motor AC90W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 7KW
• 36 Amps
• Dimension (mm) 1500x350x1500
• Dimension (in) 59"x13.78"x59"
• Dimension from floor to conveyor (adjustable) 23"-28"

• Conveyor speed 0-10m/min
• Max.packaging size 3.15 x 11.4 inches (80x290mm)
• Tunnel size 39.37 x 4 x 12.5 Inches (1000x100x320 mm)
• Max.loading 33lbs (15kg)
• Shrink film POF,PVC,PP

• Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
• Max.Packing size 160 x 350H mm (6.29" x 13.78")
• Conveyor motor DC50W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS (33 lb)
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 9KW
• 36 Amps
• Dimension 1500x400x1520 mm (59" x 15.75" x 60")
• Dimension from floor to conveyor (adjustable) 23"-28"

• Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
• Max.Packing size 160 x 350H mm (6.29" x 13.78")
• Conveyor motor DC50W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS (33 lb)
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 9KW
• 36 Amps
• Dimension 1500x400x1520 mm (59" x 15.75" x 60")
• Dimension from floor to conveyor (adjustable) 23"-28"

• Sealing and shrinking in one station
• Single person easy operation
• Economical for low volume production.
• Standard shrink film:  POV, POF, PP
• Max Sealing Size: L 21.65" (550mm) x W 15.75" (400mm)
• Power supply: 220-240V / 50-60Hz, Single Phase - wire only

CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing  stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is  suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.

• Stainless Steel Construction
• Digital Thermostat (not shown)
• Product Counter (not shown)
• 1/2 HP Motor
• 2 Sets of Heating Blocks
• Right Feed
• Dry ink coding
• 110 volt
• 0-315”/min seal speed
• 8mm seal width
• 11.8” wide conveyor

• 1/8" Seal width x 20" seal length
• 60 second Adjustable Timers for Heat and Cool
• Electronic Temperature control
• Start button
• Includes 2 standard Tube Racks
• Welded steel case with Powder coat finish

• Power - 220V/60Hz, Single Phase
• Draw - 41amps
• Tunnel size - 47" x 17.717”" x 13.75"
• Overall size - 63" x 23." x 51.2"
• Maximum load on conveyor - 11 lbs.

• 20" Hand Operated Impulse Sealer
• Maximum Seal Length: 20 inches
• Max. Seal Thickness: 8 mil
• Seal Width: 3 mil

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.

Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.

• Feed Direction
  • Right to Left
  • Left to Right
    
    
• Seal Width
  • 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
    
    
• Sealing Capacity
  • 6 mil single thickness gusseted bags
  • 12 mil single thickness flat bags
    
    
• Temperature Control
  • 600 ± 2 ºF
    
    
• Speed
  • Variable speed up to 750 inches per minute

The CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.

The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.

CFL200 Liquid Filling Line Machine: At a Glance

Quickly and confidently set up a bottle filling line in a small space. Start a more efficient production run for your business with this compact liquid packaging line machine. Fill up to one bottle per second with assistance from automated processes. Compatible with a wide range of liquid products.

• Volume range: 5 - 240ml per cycle
• Filling speed: up to 60 bottles /min depending on fill volume
• Filling accuracy: +/-1%

• Maximum Web Width: 5"
• Maximum Roll Diameter: 8"
• Core Size: 1" or 3” Diameter

• Maximum Web Width: 10”
• Maximum Roll Diameter: 8”
• Core Size: 1" or 3” Diameter

Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Type: Wrapper
• Materia:l HDPE
• Width: 400mm / 16 inch
• Thickness: 20um
• Length: 450m / 1476ft

• Multi-layer extrusion film
• Environmental friendly, Recyclable.
• Easy operation
• Save storage
• Different sizes for all your packing need.
• **Must be sold in quantities of 2 rolls

• Infeed Hopper Capacity: 100L
• Dispensing Height: 69"
• Bucket volume: 1.8L
• Bucket size: 16.5" L x 5.5" W x 2.76"H
• Dispersing Height 69"
• Lifting speed 2.5 - 5 cubic meter/hour
• Power 550w Voltage 220v
• Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
• Specification The parts contacted with food are food grade plastic
• Requires Assembly*

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

• Speed: Up to 720 Cases/Hour (65 fpm)
• Case Length: 6" minimum – no maximum
• Case Width: 4.75" minimum – 20" maximum
• Case Height: 6" minimum – 20" maximum

• Full Scrap Rewind
• Label Roll Diameter up to 12”
• Durable All Steel Frame with Powder Coat Finish
• Dispenses Die-cut or Butt-cut Labels
• Accommodates Multiple Labels on a Common Liner 
• Shipping Weight: 13 Lbs.
• Maximum Web Width: 2.5"
• Maximum Roll Diameter: 12"
• Core Size: 1" or 3”

The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.

• Available with leg supports in 2 heights;
  18-1/4” to 24-1/4” Height
  26-1/4” to 32-1/4” Height
• 1.9” Dia. Rollers
• Rollers on 3” Centers
• 24” Overall Width
• 21” Between Frame

The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.

• Available with leg supports in 2 heights;
  18-1/4” to 24-1/4” Height
  26-1/4” to 32-1/4” Height
• 1.9” Dia. Rollers
• Rollers on 3” Centers
• 24” Overall Width
• 21” Between Frame

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

Small to Medium sized companies moving from hand filling to automated filling of bulk sized cartons and bags

• Fill Range:10 lbs to 75 lbs range
• Output Speed:Up to 300-400 fills/hour*
• Capacity:Bulk filling for weights of up to 75lbs
• Single Head

The CE-S5 semi-automatic scale has automatic tare, automatic feed and speed controls for both bulk and dribble feed rates, and automatic set points.

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

Small to medium sized companies filling non-free-flowing products

• Fill Range:0.5 oz to 10 lbs range
• Output Speed:Up to 600-800 fills/hour*
• Capacity:3.5 cu.ft. product capacity
• Single Head

The model CE-S6 cascading weigh filler is designed to fill harder to run products such as crackers, chips and other non-free-flowing products.

Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

• Minimum Box Size: 7"(L) x 7"(W) x 4"(H)
• Maximum Box Size: 23.5"(L) x 19.5"(W) x ∞(H)
• Emergency stop switch
• Locking casters
• Air: 1 CFM at 60 PSI
• Electrical: None required
• 1 year on parts

• Speed: 25 carriers per minute.
• Easy Change Over from 4 to 6 Packs
• Compact Footprint
• Allen Bradley Controls
• 220V 3-Phase
• FOOTPRINT: 142"L x 47"W x 103"H

The CE-41C Semi-Automatic Hot Code Printeris great from printing lot numbers, expiration dates, and other info on to plastic bags and other packaging material. The Hot code printer is ideal for imprinting date codes, lot numbers, expiration dates, and other letters/numbers into plastic and paper bags. Character Sets are 1/8” inch in height.

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

• Sealing Speed: 0-16 m/min
• Sealing Width: 8-10 mm
• Sealing Temperature: 0-300° C
• Film Thickness: ≤.08mm
• Max Bag Weight: ≤ 1kg
• Max Conveyor Weight: ≤ 3kg
• Horizontal Only

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard (See Separate List for Sizing)
• Tubing: Silicone 7/16 Inch OD
• Valve: ¼"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

• Machine Dimensions 37" L x 27" W x 48" H
• Adjustable Height 37 TO 43 INCHES
• Belt Dimensions 36" L x 3/4" W x 1" H
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Filling Range 10–5000 ml
• Filling Accuracy ± 1 %
• Power Supply 110v; 50/60 Hz; Single phase
• Driven Device DC Motor
• Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• (Min) 5ml - (Max)10 Liters Per Head Each Nozzle Fills quantity of 35 , 1-Oz bottles of water in 60 seconds

• Machine Dimensions 37" L x 24.5" W x 44" H
• Adjustable Height 35.5 TO 42 INCHES
• Angle Adjustment For Tapered Bottles
• Belt Dimensions 1”H x 36” L x ¾” Thickness
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

Small to medium sized companies needing high rates of speed, blending products, or integrating with automatic baggers.

• Fill Range: 0.5 oz to 20 lbs range
• Output Speed: Up to 600-1500 fills/hour*
• Capacity:5.1 cu.ft. product capacity
• Dual Heads

The CE-S7 can be set to weigh two completely different products at different weights to easily mix products into a container.

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

Hot Glue Sealing System

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 28"
• Maximum Case Height = 30"*
• FOOTPRINT: 109" L x 68" W x 77.5" H
• Stainless Steel Upgrade Available!