CE-15 Automatic Case Erector*

Machine comes with a 1 year limited part warranty and tech support.

CE-15 automatic case erector for small shipping boxes

The CE-15 takes a flat box and opens it into a folded, formed box with one side left open for packing. In plain terms, it opens the flat carton, folds the bottom flaps, and tapes the bottom shut. The top stays open so you can put products inside. It prepares the box for filling; it does not fill the box or seal the top after packing.

This automatic case erector, also called a box erector or carton former, produces 12–15 boxes per minute. It is designed for the compact shipping boxes used in e-commerce fulfillment, helping reduce repetitive hand folding and bottom taping during everyday packing and seasonal order surges.

How does the CE-15 form a box?

1. Load flat boxes into the magazine.
2. The machine picks a flat box from the stack and opens it into a square case.
3. It folds the bottom flaps and seals the bottom seam with packing tape.
4. The formed box exits with its top open, ready for products to be packed inside.

Key features and packaging-line integration

• Automatic box opening, bottom-flap folding, and bottom sealing
• Capacity of 12–15 boxes per minute for small-box fulfillment
• Reduces manual box-building work and packing-line bottlenecks
• Designed for straightforward operation with minimal setup
• Compatible with weighing, labeling, and scanning equipment
• Supports warehouse management system (WMS) integration and connected warehousing, inventory, and shipping workflows

CE-15 technical specifications

• Capacity: 12–15 boxes per minute
• Minimum box size: 7 × 3.14 × 3.94 inches (length × width × height)
• Maximum box size: 10 × 7.87 × 7.87 inches (length × width × height)
• Table height with feet: 26.75 inches
• Machine dimensions: 71 × 71 × 55 inches
• Machine weight: 772 lb
• Power supply: 110V, 60 Hz, single phase
• Air supply: 5 CFM at 90 PSI

Electrical and compressed-air requirements

The CE-15 requires 110V, 60 Hz, single-phase electrical power and compressed air supplying 5 CFM at 90 PSI.

Where it fits in your packing operation

Use the CE-15 at the box-preparation stage of an e-commerce fulfillment or warehouse packing line. It turns flat cartons into bottom-sealed, open-top boxes ready for filling. It is suited to high-volume shipping, seasonal packaging surges, and operations looking to reduce manual box building or connect box preparation with weighing, labeling, scanning, and warehouse systems.

Frequently asked questions

Does it turn a flat box into an open box?
Yes. It erects a flat carton, folds and tapes the bottom, and leaves the top open for packing.

Does it close every side of the box?
No. It seals the bottom while leaving the top open. Top closing takes place after the box is filled.

How fast is the CE-15?
Its listed capacity is 12–15 boxes per minute.

What box sizes can it handle?
Minimum 7 × 3.14 × 3.94 inches and maximum 10 × 7.87 × 7.87 inches, measured length × width × height.

What power and air does it need?
110V, 60 Hz, single-phase power and 5 CFM of compressed air at 90 PSI.