Search results for: '8 replacement element kit 166'
-
8" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths$10.00
-
16" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths$15.00
-
12" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths$13.00
-
20" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths$17.00
-
-
Element kit for CEFS-F350 Foot Sealer - 14"$42.00
-
Element kit for CEFS-F450 Foot Sealer - 18"$42.00
-
Element kit for CFES-F650 Foot Sealer - 26"$50.00
-
- Maximum Seal Length: 8 inches
- Max. Seal Thickness: 6 mil
- 8" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 8 inch (200 mm)
- Max. Seal Thickness: 6 mil
- Seal Width: 3/16 Inches (5 mm)
- Heat Time: 0-3.5 (sec)
$63.00 -
-
HAS 1.5 TC FLANGE
Heated Hopper for SGP Series, 8 gal.$1,539.00 -
-
Hopper with Mixer for SGP Series, 8 gal.$824.00
-
The CE-8 Manual Coding Machine is a hot code printer ideal for imprinting date codes, lot numbers, expiration dates, and other letters/numbers into plastic and paper bags.$175.00
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SGP Series Single Head Buna / Nitrile Seal Kit$75.00
-
SGP Series Dual Head Buna / Nitrile Seal Kit$125.00
-
SGY Series Dual Head Buna / Nitrile Seal Kit$125.00
-
SGY Series Single Head Buna / Nitrile Seal Kit$75.00
-
SGY Series Dual Head Buna / Nitrile Seal Kit$125.00
-
SGY Series Dual Head Buna / Nitrile Seal Kit$125.00
-
SGY Series Dual Head Buna / Nitrile Seal Kit$125.00
-
SGY Series Dual Head Buna / Nitrile Seal Kit$150.00
-
SGY Series Single Head Buna / Nitrile Seal Kit$83.00
-
SGY Series Single Head Buna / Nitrile Seal Kit$75.00
-
SGY Series Single Head Buna / Nitrile Seal Kit$75.00
-
SGY Series Single Head Buna / Nitrile Seal Kit$80.00
-
SGY Series Single Head Buna / Nitrile Seal Kit$100.00
-
Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.
- Feed Direction
- Right to Left
- Left to Right
- Seal Width
- 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
- 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
- Sealing Capacity
- 6 mil single thickness gusseted bags
- 12 mil single thickness flat bags
- Temperature Control
- 600 ± 2 ºF
- 600 ± 2 ºF
- Speed
- Variable speed up to 750 inches per minute
$11,999.39 - Feed Direction
-
SGY Series Dual Head Buna / Nitrile Seal Kit$150.00
-
This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.$3,925.00
-
Band Kit - (10) Teflon Belts (2) Rubber Leading Belts -2500$55.00
-
Band Kit - (10) Teflon Belts (2) Rubber Leading Belts -3000$55.00
-
Sensor Kit – SICK Photoelectric Proximity Sensor, Diffuse Type, Custom Bracket$309.00
-
Pneumatic conveyor powder loader kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, control panel and 2" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand.
Best for powders or very dusty materials.
$8,639.00 -
- Adjustable Guide Rails, Up To 7.5"
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
As low as $4,400.00 -
- Adjustable Guide Rails, Up To 4.5"
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
Available in 6', 8', 10' & 12' lengths.
As low as $4,235.00 -
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
As low as $4,620.00 -
This single chamber vacuum sealer is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.$995.00
-
This single chamber vacuum sealer featuring dual sealing bars, one on each side is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.$1,985.00
-
Dispensers for labels from 3/8″-4″ widths on Simple Simon 4″ and from 3/8″ – 6 3/4″ widths to any length$85.00
-
Dispensers for labels from 3/8″-4″ widths on Simple Simon 4″ and from 3/8″ – 6 3/4″ widths to any length$95.00
-
L-bar sealers use center fold film to protect your products and give them an attractive, professional look. Cleveland Equipment's CEFQL380 L-Bar Sealer is easy to use and to maintain and is an excellent L-sealer for many types of products. Weighing 77 pounds, this machine can handle maximum sealing dimensions of 19.65" x 13.75". It's small enough to set up on a tabletop or desk.$439.00
-
with Ink Print Wheel
Two in One Bag Sealer Machine!
Horizontal / Vertical Configurations with Ink Print WheelThe CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.
The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.
- Stainless steel
- 3/8 in. Seal Width
- Digital Temperature controller
- Speed controlled conveyor
- Counter
- Emergency stop switch
- Ink Print Wheel
- Minimum Vertical Bag Height - 4" with height adj bracket
10" standard unit - Maximum Vertical Bag Height - 10."with height adj bracket
18" standard unit - Optional Stainless Steel Stand ($275)
$1,295.00 -
- MADE IN USA
- 3 Year Warranty!
- Dispense labels 3/8" to 4.5" widths
- Butt cut, or die cut compatible!
Available with Photoelectric IR Sensor or Microswitch!Dispensa-Matic U-45 Label Dispenser: Is a heavy-duty semi-automatic electric label dispenser for labels from 3/8"-4.5" widths x 3/8" to any length. This label dispenser advances at over 4" per second standard (Faster than so called High-Speed machines from competitors), and OVER 10" PER SECOND with our High-speed version!
$695.00 -
Optically sensing and includes all options! Bottle and Cylindrical Label Applicator with Optical Sensor for .5" to 8" Diameters!$3,395.00
-
- Maximum Seal Length: 12 inches
- Max. Seal Thickness: 8 mil
- 12" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 12 Inches (300 mm)
- Max. Seal Thickness: 6 mil
- Seal Width: 0.12 inch (3mm)
- Heat Time: 0-3.5 (sec)
$107.00 -
- Maximum Seal Length: 16 inches
- Max. Seal Thickness: 8 mil
- 16" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 16 inch(400 mm )
- Max. Seal Thickness: 6 mil
- Seal Width: 0.12 inch (3mm)
- Heat Time: 0-3.5 (sec)
$118.00 -
Pneumatic conveyor small capacity pellet loader kit. Aluminum pneumatic loader with control panel and 1.25" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand. Ideal for feeding plastic extrusion machines and similar applications.
Best for materials that have no dust, such as clean pellets.
$2,725.00 -
The machine features one (1) seal bar that is approx. 10" wide. The open area in the chamber is about 10" x 13.5" (this does not include the area taken up by the seal bar). Simply set the optimal vacuum time, sealing time, cooling time, and sealing temperature for your bags and away you go.$949.00
-
(Min) 1ml - (Max)1.4 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8"
- Spring: Stainless Food Grade Standard
- Output: (Min) 1ml - (Max)1.4 Liters
$2,871.00 -
Pneumatic Conveyor Coffer Load Kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, 2" inlet. Includes control panel and 15' grounded flexible hose, 36" aluminum pick-up wand.
Best for coffee beans, grains, seeds, other similar organic materials.
$7,035.00 -
with Emboss/Imprint Wheel
Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!
If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.
What is a Continuous Sealer?
A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes.
Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages.
This results in a safer operation, since there is less potential for human error.
If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.
Benefits of a Conveyor Heat Sealer
Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.
Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate.
The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal.
Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.
$987.00 -
(Min) 5ml - (Max)10 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8"
- Spring: Stainless Food Grade Standard
- Output: (Min) 5ml - (Max)10 Liters
will fill 35qty 1-Oz bottles of water in 60 seconds
$3,807.00 -
(Min) 5ml - (Max)10 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8"
- Spring: Stainless Food Grade Standard
- (Min) 5ml - (Max)10 Liters Per Head Each Nozzle Fills quantity of 35 , 1-Oz bottles of water in 60 seconds
$4,451.00 -
- Maximum Web Width: 5"
- Maximum Roll Diameter: 8"
- Core Size: 1" or 3” Diameter
$59.00 -
- Maximum Web Width: 10”
- Maximum Roll Diameter: 8”
- Core Size: 1" or 3” Diameter
$69.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front & Back Labeling- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 9" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,345.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front & Back Labeling- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 15" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,545.00 -
- Maximum Seal Length: 20 inches
- Max. Seal Thickness: 8 mil
- 20" Hand Operated Impulse Sealer
- Maximum Seal Length: 20 inches
- Max. Seal Thickness: 8 mil
- Seal Width: 3 mil
$151.00 -
- 1/8" Seal width x 20" seal length
- 60 second Adjustable Timers for Heat and Cool
- Electronic Temperature control
- Start button
- Includes 2 standard Tube Racks
- Welded steel case with Powder coat finish
$3,997.00 -
- Sealing Speed: 0-16 m/min
- Sealing Width: 8-10 mm
- Sealing Temperature: 0-300° C
- Film Thickness: ≤.08mm
- Max Bag Weight: ≤ 1kg
- Max Conveyor Weight: ≤ 3kg
- Horizontal Only
$2,745.00 -
with Optional Inject Printer
- *Works with the largest range of bottles
(1/4” to 6.5” Diameter) - Solid state electronics
- Scrap rewind for quick start and removal of waste liner
- Photo cell label sensor
- Durable all steel frame with powder coat finish
- Footswitch activated
- Product Size: 1/4” to 6.5” Diameter
- Minimum Label Size: 1/2 x 1/2”
- Maximum Label Width: 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
$4,798.00 - *Works with the largest range of bottles
-
- Machine Dimensions 37" L x 27" W x 48" H
- Adjustable Height 37 TO 43 INCHES
- Belt Dimensions 36" L x 3/4" W x 1" H
- Min. Bottle Width 1mm Diameter
- Max. Bottle Width 7” Diameter
- Electrical Requirements 115V / 1PH / 60Hz
$4,345.00 -
- Filling Range 10–5000 ml
- Filling Accuracy ± 1 %
- Power Supply 110v; 50/60 Hz; Single phase
- Driven Device DC Motor
- Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)
$4,395.00 -
- Machine Dimensions 37" L x 24.5" W x 44" H
- Adjustable Height 35.5 TO 42 INCHES
- Angle Adjustment For Tapered Bottles
- Belt Dimensions 1”H x 36” L x ¾” Thickness
- Min. Bottle Width 1mm Diameter
- Max. Bottle Width 7” Diameter
- Electrical Requirements 115V / 1PH / 60Hz
$5,005.00 -
-
The CE-41C Semi-Automatic Hot Code Printeris great from printing lot numbers, expiration dates, and other info on to plastic bags and other packaging material. The Hot code printer is ideal for imprinting date codes, lot numbers, expiration dates, and other letters/numbers into plastic and paper bags. Character Sets are 1/8” inch in height.
$435.00 -
(Min) 5ml - (Max)10 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel – Food Grade Standard
- Seals: Buna – Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8â€
- Spring Stainless – Food Grade Standard
- Output: (Min) 5ml - (Max)10 Liters
will fill 35qty 1-Oz bottles of water in 60 seconds
$2,173.00 -
- Up To 12 Cases per Minute!
- Minimum Case Width = 8"
- Maximum Case Width = 22"
- Minimum Case Height = 4"
- Maximum Case Height = 37"*
- Maximum KD Case (L + W) = 44"
- FOOTPRINT: 105" L x 91.75" W x 88.5" H
- Stainless Steel Upgrade Available!
$40,975.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front Labeling Only- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 15" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,195.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front Labeling Only- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 9" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$1,995.00 -
- Bottle: Diameter: 1.89" - 3.93" (48-100mm) / Height: 4.56" (116mm)
- Capsule size: Diameter > 6mm, H > 3mm
- Tablet size: 2~30mm
- Accuracy: ± 1 tablet
- Counting speed: 600~1000 pcs/min
- Voltage : 110V, 50/60Hz
- Amperage: 2A
- Power: 100W
- Dimension: (L) 29.5" x (W) 21.65" (H) 29.5"
$8,795.00 -
Economical Unit for Medium and Small Production Filling
- 7.5 Gallon Hopper
- Fill amount 4oz to 2.5 gal
- Min bottle height 4 in Max 15 inches
- Min bottle opening ½ inch
- Handles from 3 to 30 containers per minute*
- Accepts Free-flowing and low viscosity liquids
- Stainless Steel tank
- Stainless Steel Spouts
- Painted Stand (Stainless Steel Optional)
- Capable of 20+ quarts of water per minute
- Capable of 10+ quarts of syrup per minute
- Capable of 10+ gallons of water per minute
- *Test results based on standard 5 spout machine
$4,695.00 -
- Industrial Capsule Counting Bottle Filler
- Bottle: Diameter: 1.89" - 3.93" (48-100mm) / Height: 4.56" (116mm)
- Capsule size: Diameter > 6mm, H > 3mm
- Tablet size: 2~30mm
- Accuracy: ± 1 tablet
- Counting speed: 600~1000 pcs/min
- Voltage : 110V
- Dimension: (L) 29.5" x (W) 21.65" (H) 29.5"
$8,795.00 -
CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.
- Stainless Steel Construction
- Digital Thermostat (not shown)
- Product Counter (not shown)
- 1/2 HP Motor
- 2 Sets of Heating Blocks
- Right Feed
- Dry ink coding
- 110 volt
- 0-315”/min seal speed
- 8mm seal width
- 11.8” wide conveyor
$4,838.00 -
- All Steel Frame Construction.
- Standard Photo Cell
- Open vertical peel edge will not trap labels and allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 26 lbs.
- Max label width: 7.5"
- Max roll diameter: 12"
- Core size: 3"
$859.00 -
- Scrap rewind for quick start and removal of waste liner
- Full scrap rewind feature
- Durable all steel frame with powder coat finish
- Footswitch activated
- Accuracy +/- 1/16”
- Minimum Label Size: 1/2 x 1/2”
- Maximum Label Size: 5” x 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
$4,698.00