Search results for: '8mmx16mm stainless allen screw'

This semi-automatic capper machine has speeds of 20-25 bpm, and is designed for 22-110 mm screw caps and bottle heights ranging from 50-260 mm. With an adjustable capping height (as well as speed), this screw capping machine has the flexibility you need.

Featuring a stainless steel body along with stainless steel stand and casters, this machine has the strength and durability your process requires. Additional benefits to this design are such features as a sensor detection system. This means that if there is no bottle, then no capping occurs.

This machine also has a microprocessor, enabling user-friendly control, as well as an emergency stop button.

It is important to note that caps have to be fed manually into this machine. It should not be washed down. Instead, it needs to be wiped down when cleaning. Here is some additional information and reviews pertaining to this bottle capping machine:

• Capping speed: 20-25 bpm
• Suitable for 22-110 mm screw cap
• Bottle height: 50-260 mm
• THIS IS NOT A WASH DOWN UNIT. IT IS A WIPE DOWN UNIT ONLY

This bottle capping machine is ideal if you work with pills, coated capsules, or other tablets. And since different types of products require different industrial needs, this capper machine can fill everything from plastic bags to bottles.

Adjust the bottle height if need be, as well as the torque to best suit your preferences. And since this capping equipment is hand-held and sleek in design, it’s simple to use for any purpose. Plus, don’t worry about cap breakage thanks to the rubber on the bottom of the machine.

With convenience and efficiency like this, not to mention a stainless steel and aluminum alloy frame, you can’t go wrong with this bottle capping machine.

Here are some specifics when it comes to this capping equipment, as well as some reviews:

• Cap type: screw cap
• Cap diameter: 30mm ~ 60mm
• Capping speed: 20~30 bottles/ min
• Air pressure requirement: 2~5kg
• Voltage: 110V / 60Hz
• Amperage: 5A
• Power: 180W

Stainless Upgrade & Sanitary Clamps for Siphon Filler

The BB-2 Bottom Belt Stainless Steel Industrial Case Taper is a cost-effective top and bottom case taper designed for large run case sealing. The BB-2 utilizes pressure-sensitive tape and features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes.

• Bottom Belt Drive
• wash-down NEMA 4
• Includes 1 pack table
• Minimum Box Size: 5"(L) x 6"(W) x 4"(H)
• Maximum Box Size: ∞"(L) x 21"(W) x 20.5"(H)
• Single drive motor
• Tape Speed: 30 cases/min
• Belt Speed: 60ft/min
• Power Supply 110 VAC, 60Hz, 6A

Eastey's SB-EX Stainless Steel Case Taper offers the quality that you have come to rely on from Eastey. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 30 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

• Speed: 25 carriers per minute.
• Easy Change Over from 4 to 6 Packs
• Compact Footprint
• Allen Bradley Controls
• 220V 3-Phase
• FOOTPRINT: 142"L x 47"W x 103"H

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

1

1

1

1

1

1

Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):

When it comes to convenience, you can’t do much better than this hand-held electric capping machine. It is easy to carry, and is mainly used for easy screwing (tightening) and unscrewing (loosening) of the cap.

Since the design has an adjustable clutch, it is suitable for all kinds of strength bottle capping work. Applying to bottle cap ranges of 10-50 mm, and single production capacities of up to 30-90 bottles / min, this convenient device is also highly effective.

Here are a few more details pertaining to this bottle capping machine, as well as some reviews to consider:

Weigher Stand, Stainless Steel

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

• Up To 12 Cases per Minute!
• Minimum Case Width = 8"
• Maximum Case Width = 22"
• Minimum Case Height = 4"
• Maximum Case Height = 37"*
• Maximum KD Case (L + W) = 44"
• FOOTPRINT: 105" L x 91.75" W x 88.5" H
• Stainless Steel Upgrade Available!

Cleveland machinery manufactures standard conveyors for all our machines as well as custom conveyors for all of our customers. All of our conveyors are manufactured in stainless steel and have tool-less guide rail adjustments. We stock 4.5 and 7.5 inch straight conveyors in 10, 13, 16 and 20 feet lengths.

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 29"
• Maximum Case Height = 30"*
• FOOTPRINT: 82.5" L x 67" W x 80" H
• Stainless Steel Upgrade Available!

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

• Available in 36", 48" and 60" diameters
• Stainless Steel Construction
• Tool Less Bottle Orienting Guides
• Unscrambler For Up To 1 Gallon Size Container
• Counter And Clockwise Rotation
• Adjustable Height Legs
• Variable Speed Drive For Rotation Speed Control
• UL Certified Components
• Made In The USA

Hot Glue Sealing System

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 28"
• Maximum Case Height = 30"*
• FOOTPRINT: 109" L x 68" W x 77.5" H
• Stainless Steel Upgrade Available!

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard (See Separate List for Sizing)
• Tubing: Silicone 7/16 Inch OD
• Valve: ¼"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

Case Length: 6" minimum — 20" maximum

Case Width: 6" minimum — 20" maximum Case

Height: 4.5" minimum — 20" maximum

Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps

Economical Unit for Medium and Small Production Filling

• 7.5 Gallon Hopper
• Fill amount 4oz to 2.5 gal
• Min bottle height 4 in Max 15 inches
• Min bottle opening ½ inch
• Handles from 3 to 30 containers per minute*
• Accepts Free-flowing and low viscosity liquids
• Stainless Steel tank
• Stainless Steel Spouts
• Painted Stand (Stainless Steel Optional)
• Capable of 20+ quarts of water per minute
• Capable of 10+ quarts of syrup per minute
• Capable of 10+ gallons of water per minute
• *Test results based on standard 5 spout machine

1

1

1

1

1

1

1

1

1

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel – Food Grade Standard
• Seals: Buna – Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8”
• Spring Stainless – Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• (Min) 5ml - (Max)10 Liters Per Head Each Nozzle Fills quantity of 35 , 1-Oz bottles of water in 60 seconds

Small to medium sized companies needing higher rates of filling speeds

• Fill Range:0.5 oz to 5 lbs (various by volume)
• Output Speed:Up to 600-800 fills/hour*
• Capacity:up to 650 cubic inches volume
• Single Head

1

1

1

1

1

1

 

Two in One Bag Sealer Machine! Horizontal / Vertical Configurations with Ink Print Wheel

The CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.

The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.

1

1

1

1

1

1

1

1

1

1

• Conveyor speed 0-10m/min
• Max.packaging size 3.15 x 11.4 inches (80x290mm)
• Tunnel size 39.37 x 4 x 12.5 Inches (1000x100x320 mm)
• Max.loading 33lbs (15kg)
• Shrink film POF,PVC,PP

CE-15 Automatic inline bottle cleaner machine (conveyor or options included):

CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing  stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is  suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.

• Stainless Steel Construction
• Digital Thermostat (not shown)
• Product Counter (not shown)
• 1/2 HP Motor
• 2 Sets of Heating Blocks
• Right Feed
• Dry ink coding
• 110 volt
• 0-315”/min seal speed
• 8mm seal width
• 11.8” wide conveyor

• Machine Dimensions 37" L x 27" W x 48" H
• Adjustable Height 37 TO 43 INCHES
• Belt Dimensions 36" L x 3/4" W x 1" H
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Filling Range 10–5000 ml
• Filling Accuracy ± 1 %
• Power Supply 110v; 50/60 Hz; Single phase
• Driven Device DC Motor
• Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)

• Industrial Capsule Counting Bottle Filler
• Bottle: Diameter: 1.89" - 3.93" (48-100mm) / Height: 4.56" (116mm)
• Capsule size: Diameter > 6mm, H > 3mm
• Tablet size: 2~30mm
• Accuracy: ± 1 tablet
• Counting speed: 600~1000 pcs/min
• Voltage : 110V
• Dimension: (L) 29.5" x (W) 21.65" (H) 29.5"

• Machine Dimensions 37" L x 24.5" W x 44" H
• Adjustable Height 35.5 TO 42 INCHES
• Angle Adjustment For Tapered Bottles
• Belt Dimensions 1”H x 36” L x ¾” Thickness
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.