Search results for: 'tube sealers parts tube sealers'
-
- 1/8" Seal width x 20" seal length
- 60 second Adjustable Timers for Heat and Cool
- Electronic Temperature control
- Start button
- Includes 2 standard Tube Racks
- Welded steel case with Powder coat finish
$3,997.00 -
with Emboss/Imprint Wheel
Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!
If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.
What is a Continuous Sealer?
A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes.
Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages.
This results in a safer operation, since there is less potential for human error.
If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.
Benefits of a Conveyor Heat Sealer
Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.
Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate.
The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal.
Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.
$987.00 -
with Ink Print Wheel
Two in One Bag Sealer Machine!
Horizontal / Vertical Configurations with Ink Print WheelThe CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.
The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.
- Stainless steel
- 3/8 in. Seal Width
- Digital Temperature controller
- Speed controlled conveyor
- Counter
- Emergency stop switch
- Ink Print Wheel
- Minimum Vertical Bag Height - 4" with height adj bracket
10" standard unit - Maximum Vertical Bag Height - 10."with height adj bracket
18" standard unit - Optional Stainless Steel Stand ($275)
$1,295.00 -
CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.
- Stainless Steel Construction
- Digital Thermostat (not shown)
- Product Counter (not shown)
- 1/2 HP Motor
- 2 Sets of Heating Blocks
- Right Feed
- Dry ink coding
- 110 volt
- 0-315”/min seal speed
- 8mm seal width
- 11.8” wide conveyor
$4,838.00 -
- Maximum Seal Length: 20 inches
- Max. Seal Thickness: 8 mil
- 20" Hand Operated Impulse Sealer
- Maximum Seal Length: 20 inches
- Max. Seal Thickness: 8 mil
- Seal Width: 3 mil
$151.00 -
L-bar sealers use center fold film to protect your products and give them an attractive, professional look. Cleveland Equipment's CEFQL380 L-Bar Sealer is easy to use and to maintain and is an excellent L-sealer for many types of products. Weighing 77 pounds, this machine can handle maximum sealing dimensions of 19.65" x 13.75". It's small enough to set up on a tabletop or desk.$439.00
-
Maximum Seal Length: 14 inches Max. Seal Thickness: 8mil Seal Width: 5mm
CEFS-F350 14" Foot Operated Impulse Sealer$351.00 -
Maximum Seal Length: 18 inches Max. Seal Thickness: 8mil Seal Width: 5mm
CEFS-F450 18" Foot Operated Impulse Sealer$417.00 -
Maximum Seal Length: 26 inches Max. Seal Thickness: 8mil Seal Width: 5mm
CEFS-F650 26" Foot Operated Impulse Sealer$450.00 -
- Maximum Seal Length: 12 inches
- Max. Seal Thickness: 8 mil
- 12" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 12 Inches (300 mm)
- Max. Seal Thickness: 6 mil
- Seal Width: 0.12 inch (3mm)
- Heat Time: 0-3.5 (sec)
$107.00 -
- Maximum Seal Length: 16 inches
- Max. Seal Thickness: 8 mil
- 16" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 16 inch(400 mm )
- Max. Seal Thickness: 6 mil
- Seal Width: 0.12 inch (3mm)
- Heat Time: 0-3.5 (sec)
$118.00 -
- Maximum Seal Length: 8 inches
- Max. Seal Thickness: 6 mil
- 8" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 8 inch (200 mm)
- Max. Seal Thickness: 6 mil
- Seal Width: 3/16 Inches (5 mm)
- Heat Time: 0-3.5 (sec)
$63.00 -
Element kit for CEFS-F350 Foot Sealer - 14"$42.00
-
Element kit for CEFS-F450 Foot Sealer - 18"$42.00
-
Element kit for CFES-F650 Foot Sealer - 26"$50.00
-
Top & Bottom Case Sealer
Our industrial-grade semi-automatic box sealers are designed for both small- and large-scale businesses. Well-equipped with powerful, reliable motors and belt systems that are truly made to last, these industrial carton sealers provide clean and uniform seals on boxes small and large. Three heavy-duty motors allow these machines to run safer for longer, while intuitive, easy-to-use functions mean simple operation for your whole staff. Cleveland Equipment provides financing on carton sealers and can ship them to you in as little as 24 hours.
- Drive: Top and Side Belts
- Minimum Box Size: 5.9"(L) x 4.75"(W) x 6.5"(H)
- Maximum Box Size: 27"(W) x 27"(H)
- (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2" Tape Heads (3" Tape Heads Optional)
- Includes 16" Wide Infeed/Outfeed Tables ( Included )
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Switch
As low as $4,077.00 -
Top & Bottom Case Sealer
- Drive: Side Belts
- Minimum Box Size: 7.9"(L) x 5.9"(W) x 4.7"(H)
- Maximum Box Size: 19.6"(L) x 19.6"(W) x 19.6"(H)
- Heavy Duty 200 Watt Motors (2)
- Belt Speed: 59'/ minute (18m/min)
- Power: 110V 60Hz
As low as $6,379.00 -
Top & Bottom Case Sealer
Cleveland Equipment semi-automatic box sealers are designed to help you save time and money. Adjustable belt systems allow you to tailor the machine to both small and large boxes for clean, uniform seals each and every time. Each carton sealer has a set of powerful, reliable 200 watt motors ( our competitors use under sized 120 watt motors ) and features user-oriented operations to make running it a breeze. Please make note of the breaker switch which is not offered by our competitors. In case of a power surge this will protect the electrical components. Our machines are well-suited for all levels in the packaging industry. We stock our machines so they are available to ship to you within 24 hours.
- Drive: Top and Side Belts
- Minimum Box Size: 5.9"(L) x 4.75"(W) 6.5"(H)
- Maximum Box Size: 19.6"(W) x 19.6"(H)
- (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2" Tape Heads (3" Tape Heads Optional)
- 16" Wide Infeed/Outfeed Tables ( Included )
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Stop
As low as $2,895.00 -
This single chamber vacuum sealer is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.$995.00
-
This single chamber vacuum sealer featuring dual sealing bars, one on each side is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.$1,985.00
-
Top & Bottom Case Sealer
Semi-automatic carton sealers are great to have on hand if you need to pack many boxes of different sizes. With intuitive, easy-to-use functions, these box tapers are fast and efficient to help you save time and money. These smart carton sealers are adjustable and create clean, uniform seals across any carton. Simply and quickly adjust the machine to the width and height of the box you're sealing and it will apply the same amount of tape to each box. They're designed to work best when sealing many boxes of the same size during each product run.
- Drive: Top and Bottom Belts
- Minimum Box Size: 5.9"(L) x 6.5"(W) x 5"(H)
- Maximum Box Size: 19.6"(W) x 19.6"(H)
- 2 Heavy Duty 120 Watt Motors ( Competitors use 90 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2 " Tape Heads (3" Tape Heads optional)
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Stop
- 4 Casters ( Included )
- 16 inch Infeed/Exit Tables ( Included )
As low as $2,395.00 -
This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.$3,925.00
-
Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.
- Feed Direction
- Right to Left
- Left to Right
- Seal Width
- 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
- 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
- Sealing Capacity
- 6 mil single thickness gusseted bags
- 12 mil single thickness flat bags
- Temperature Control
- 600 ± 2 ºF
- 600 ± 2 ºF
- Speed
- Variable speed up to 750 inches per minute
$11,999.39 - Feed Direction
-
Top & Bottom Case Sealer
- Speed: Up to 2,400 Cases/Hour (65 fpm)
- Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
- Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
- Electrical: 110VAC-1PH-60Hz – 10 Amps
- Air: None
- Casters are included in the standard unit.
- Dimensions: 51.5"L x 38"W x 56"H
$5,159.00 -
Top & Bottom Case Sealer
- Speed: Up to 2,400 Cases/Hour (65 fpm)
- Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
- Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
- Electrical: 110VAC-1PH-60Hz – 10 Amps
- Air: None
- Casters are included in the standard unit.
- Dimensions: 51.5"L x 38"W x 56"H
$4,250.00 -
For Extra Large Boxes
Top & Bottom Case Sealer
- Speed: Up to 2,400 Cases/Hour (65 fpm)
- Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
- Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
- Electrical: 110VAC-1PH-60Hz – 10 Amps
- Air: None
- Casters are included in the standard unit.
- Dimensions: 51.5"L x 38"W x 56"H
$5,325.00 -
-
The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.
- Bottom Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP drive motors
- Tape Speed: 20 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
As low as $11,900.00 -
Model Sealing Diameter CE-905A 20 to 100 mm CE-905B 15 to 35 mm $545.00 -
- Top and bottom belt drives
- Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
- PLC controlled
- Adjusted manually for box width by crank handle
- Infeed push-carton conveyor Box height adjustment is motor-driven (up/down movement)
- Locking casters standard
- Easy operation and maintenance
- Built for 24/7 Operation
- Adjustable leg supports
$24,900.00 -
Model CE-975 voltage 220V 60HZ Sealing Current Static 2A / Dynamic 10A Power 2000W Capacity 1-30 ft. / min Sealing Diameter 0.75" to 4.75" Height of bottles 1.57" to 15.5" Machine weight 155 lbs Machine size 61" x 22" x 53" Conveyor height from floor 31.5" $4,259.00 -
Opening Size: 17.717” W x 9 ¾” H Machine Size: 48”x24”x31”
- Construction Infrared Quartz Heating Tubes
- Capacity 17.717”” W x 9 ¾” H
- Output 0-30ft/min
- Range 0-300 Degrees Celsius
- Dimensions 48”x24”x31”
- Power Supply •220 VAC Single Phase, 60hz, 34amp - Wire Only
$2,357.00 -
Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum$24,500.00 -
- Sealing Speed: 0-16 m/min
- Sealing Width: 8-10 mm
- Sealing Temperature: 0-300° C
- Film Thickness: ≤.08mm
- Max Bag Weight: ≤ 1kg
- Max Conveyor Weight: ≤ 3kg
- Horizontal Only
$2,745.00 -
- Speed: Up to 720 Cases/Hour (65 fpm)
- Case Length: 6" minimum – no maximum
- Case Width: 4.75" minimum – 20" maximum
- Case Height: 6" minimum – 20" maximum
$7,900.00 -
Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs$4,850.00 -
Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!$3,895.00 -
Case Length: 6" minimum — 20" maximum
Case Width: 6" minimum — 20" maximum Case
Height: 4.5" minimum — 20" maximum
Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps
$6,995.00 -
The machine features one (1) seal bar that is approx. 10" wide. The open area in the chamber is about 10" x 13.5" (this does not include the area taken up by the seal bar). Simply set the optimal vacuum time, sealing time, cooling time, and sealing temperature for your bags and away you go.$949.00
-
-
- Sealing and shrinking in one station
- Single person easy operation
- Economical for low volume production.
- Power Supply 220V/60Hz, Single Phase.
- Standard shrink film: POV, POF, PP
- Max Package size: 15.75 x 15.75 x 5 in.
$2,729.00 -
-
- Speed: Up to 700 Cases/Hour (65 fpm belt speed)
- Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
- Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
- Electrical: 110VAC--60Hz – 10 Amps
- Air: 1 SCFM @ 70 psi
- Dimensions: 75"L x 38"W x 63"H
- Weight: 650 lbs
$8,995.00 -
- Minimum Box Size: 7"(L) x 7"(W) x 4"(H)
- Maximum Box Size: 23.5"(L) x 19.5"(W) x ∞(H)
- Emergency stop switch
- Locking casters
- Air: 1 CFM at 60 PSI
- Electrical: None required
- 1 year on parts
$8,390.00 -
- Sealing and shrinking in one station
- Single person easy operation
- Economical for low volume production.
- Standard shrink film: POV, POF, PP
- Max Sealing Size: L 21.65" (550mm) x W 15.75" (400mm)
- Power supply: 220-240V / 50-60Hz, Single Phase - wire only
$2,689.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front Labeling Only- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 15" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,195.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front Labeling Only- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 9" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$1,995.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front & Back Labeling- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 9" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,345.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front & Back Labeling- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 15" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,545.00 -
- Multi-layer extrusion film
- Environmental friendly, Recyclable.
- Easy operation
- Save storage
- Different sizes for all your packing need.
- **Must be sold in quantities of 2 rolls
Special Price $172.00 Regular Price $206.00 -
(Min) 1ml - (Max)1.4 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8"
- Spring: Stainless Food Grade Standard
- Output: (Min) 1ml - (Max)1.4 Liters
$2,871.00 -
(Min) 1ml - (Max)1.4 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard (See Separate List for Sizing)
- Tubing: Silicone 7/16 Inch OD
- Valve: ¼"
- Spring: Stainless Food Grade Standard
- Output: (Min) 1ml - (Max)1.4 Liters
$2,174.00 -
(Min) 5ml - (Max)10 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel – Food Grade Standard
- Seals: Buna – Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8â€
- Spring Stainless – Food Grade Standard
- Output: (Min) 5ml - (Max)10 Liters
will fill 35qty 1-Oz bottles of water in 60 seconds
Special Price $2,173.00 Regular Price $2,609.00 -
Pneumatic conveyor powder loader kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, control panel and 2" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand.
Best for powders or very dusty materials.
$8,639.00 -
- Infeed Hopper Capacity: 100L
- Dispensing Height: 69"
- Bucket volume: 1.8L
- Bucket size: 16.5" L x 5.5" W x 2.76"H
- Dispersing Height 69"
- Lifting speed 2.5 - 5 cubic meter/hour
- Power 550w Voltage 220v
- Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
- Specification The parts contacted with food are food grade plastic
- Requires Assembly*
$14,450.00 -
(Min) 5ml - (Max)10 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8"
- Spring: Stainless Food Grade Standard
- Output: (Min) 5ml - (Max)10 Liters
will fill 35qty 1-Oz bottles of water in 60 seconds
$3,807.00 -
(Min) 5ml - (Max)10 Liters
- Type of Machine: Bottle Filler / Gear Filler
- Construction: 304 Stainless Steel Food Grade Standard
- Seals: Buna Food Grade Standard
- Tubing: 5/8 inc OD
- Valve: 3/8"
- Spring: Stainless Food Grade Standard
- (Min) 5ml - (Max)10 Liters Per Head Each Nozzle Fills quantity of 35 , 1-Oz bottles of water in 60 seconds
$4,451.00 -
- Filling Range 10–5000 ml
- Filling Accuracy ± 1 %
- Power Supply 110v; 50/60 Hz; Single phase
- Driven Device DC Motor
- Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)
$4,395.00 -
BOX CODE PRINTER
Mount on any of our carton sealers!
- CoPilot uses proven Xaar piezo technology resulting in razor-sharp print
- Print up to .7″ of hi-resolution characters, bar codes, and logos at 185 dpi
- CoPilot’s 4.3″ full color touchscreen
- Compatible with Squid Ink’s easy-to-use Orion™ message software
** Ink not included with printer purchase
The CoPilot Hi-Resolution Printing System utilizes oil-based inks for printing on a wide range of porous substrates.
Not compatible with solvent-based inks / non-porous substrates.*
** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.$2,695.00 -
Small to medium sized companies needing higher rates of filling speeds
- Fill Range:0.5 oz to 5 lbs (various by volume)
- Output Speed:Up to 600-800 fills/hour*
- Capacity:up to 650 cubic inches volume
- Single Head
ground coffee • seeds • coffee beans • beads • soap powder • dry bulk chemicals$7,650.00 -
In Stock
- Power Supply:110V
- Min Carton size: 9.84 " L x 5.90" W x 3.94” H (250 x 150 x 100 mm)
- Max Carton Size: 21.65 " L x 15.75" W x 15.75” H (550 x 400 x 400 mm)
- Working speed: 12ctns/min
- Machine size: 79"L x 74"W x 57"H
- Machine weight: 990 lbs
$19,690.00 -
CE-15 Automatic inline bottle cleaner machine (conveyor or options included):$31,375.00
-
Cleveland expandable pressure–overflow filler model CE-33, automatic inline filling machine (No nozzles, conveyor, or options included):$18,285.00
-
- Up To 15 Cases per Minute!
- Minimum Case Length = 6"
- Minimum Case Width = 4.5"
- Minimum Case Height = 4"
- Maximum Case Width = 14"
- Maximum KD Case (L + W) = 29"
- Maximum Case Height = 30"*
- FOOTPRINT: 82.5" L x 67" W x 80" H
- Stainless Steel Upgrade Available!
$32,990.00 -
- Up To 12 Cases per Minute!
- Minimum Case Width = 8"
- Maximum Case Width = 22"
- Minimum Case Height = 4"
- Maximum Case Height = 37"*
- Maximum KD Case (L + W) = 44"
- FOOTPRINT: 105" L x 91.75" W x 88.5" H
- Stainless Steel Upgrade Available!
$40,975.00 -
- Side and top belt case sealer
- Minimum Box Size – (L) 4.5″ (W) 6″ (D) 4″
- Maximum Box Size – (L) infinite (W) 27.5″(D) 27.5″
- Three (3) 1/4 HP drive motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 4.0A
The SB-TB-2 system’s unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.As low as $6,925.00 -
- MADE IN USA
- 3 Year Warranty!
- Dispense labels 3/8" to 4.5" widths
- Butt cut, or die cut compatible!
Available with Photoelectric IR Sensor or Microswitch!Dispensa-Matic U-45 Label Dispenser: Is a heavy-duty semi-automatic electric label dispenser for labels from 3/8"-4.5" widths x 3/8" to any length. This label dispenser advances at over 4" per second standard (Faster than so called High-Speed machines from competitors), and OVER 10" PER SECOND with our High-speed version!
$695.00 -
The SB-2HD’s side belts are great for light or heavyweight, narrow or small boxes. The system is ideal for void fill cases where the packaged product does not support the box. SB-2HD is designed to handle boxes that most other case tapers can’t. SB-2HD offers fast and easy case changes with adjustable side rails and flexibility for boxes 4.5” long and as narrow as 4” wide and as low as 2” tall.
- Side belt, top and bottom case sealer
- Belt Speed – 72 feet/per minute
- Tape Speed – 30 cases/per minute, depending on box size and operator efficiency
- No air required
- Minimum Box Size: 4.5” (L) x 4.0” (W) x 2.0” (H)
- Maximum Box Size: Infinite (L) x 20” (W) x 25.5” (H)
As low as $8,050.00