Search results for: 'label applicator motor with wind direction sticker'
- Did you mean
- label applicator motor with wipe direction sticker
- label applicator motor with will direction sticker
-
- Minimum Label Size: 1/2" x 1/2"
- Maximum Label Size: 5" x 15"
- Maximum Roll Diameter: 12"
- Core Size: 1" or 3"
- Shipping weight: 45 pounds
- Electrical Requirements: 115VAC. 60HZ.,
- 500" Per Minute
$5,798.00 -
- Minimum Label Size: 1/2" x 1/2"
- Maximum Label Size: 5" x 5"
- Maximum Roll Diameter: 12"
- Core Size: 1" or 3"
- Shipping Weight: 45 pounds
- Air Requirements: 60PSI
- Electrical Requirements: 115VAC. 60HZ.
$6,850.00 -
- Scrap rewind for quick start and removal of waste liner
- Full scrap rewind feature
- Durable all steel frame with powder coat finish
- Footswitch activated
- Accuracy +/- 1/16”
- Minimum Label Size: 1/2 x 1/2”
- Maximum Label Size: 5” x 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
$4,698.00 -
with Optional Inject Printer
- *Works with the largest range of bottles
(1/4” to 6.5” Diameter) - Solid state electronics
- Scrap rewind for quick start and removal of waste liner
- Photo cell label sensor
- Durable all steel frame with powder coat finish
- Footswitch activated
- Product Size: 1/4” to 6.5” Diameter
- Minimum Label Size: 1/2 x 1/2”
- Maximum Label Width: 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
$4,798.00 - *Works with the largest range of bottles
-
- No Tools Required
- Made in the USA
- Fully adjustable unwind tension
- Waste rewind spindle to collect backing paper
- Durable all steel frame with powder coat finish
- Product Size: 1” to 5” Diameter*
- Minimum Label Size: 1” x 1”
- Maximum Label Width: 5”
- Maximum Roll Diameter: 12”
- Core Size Diameter: 1” or 3”
- *All clear labels must be tested
$2,298.00 -
- Label Roll Diameter up to 10”
- Inside Roll Guide
- Durable All Steel Frame with Powder Coat Finish
- 3” Core
- Adjustable Speed Dial
- 4.5” Web Capacity
- Web Speed up to 12 IPS
$565.00 -
0.34 - 2.0 oz / 10ml - 60ml
The SQY Series direct draw piston fillers are tabletop volumetric semi-automatic piston filling equipment used for liquid and paste products with low or high viscosity.Special Price $3,609.00 Regular Price $4,331.00 -
-
- All Steel Frame Construction.
- Open vertical peel edge will not trap labels and allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 22 lbs.
- Max label width: 2.5"
- Max roll diameter: 12"
- Core size: 1" or 3"
$613.00 -
- All Steel Frame Construction.
- Open vertical peel edge will not trap labels
- Allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 24 lbs.
- Max label width: 4.5"
- Max roll diameter: 12"
- Core size: 1" or 3"
$698.00 -
- All Steel Frame Construction.
- Standard Photo Cell
- Open vertical peel edge will not trap labels and allows multiple labels on common liner to be dispensed.
- Heavy duty motor with built in overload protection.
- Shipping weight: 26 lbs.
- Max label width: 7.5"
- Max roll diameter: 12"
- Core size: 3"
$859.00 -
- 3” Expanding Mandrel
- Inside and Outside Roll Guides
- Durable All Steel Frame with Powder Coat Finish
- Made in the USA
- 12" Max Roll Diameter
- 6.5" Max Web Width
- Web Speed up to 25 IPS
$1,130.00 -
- MADE IN USA
- 3 Year Warranty!
- Dispense labels 3/8" to 4.5" widths
- Butt cut, or die cut compatible!
Available with Photoelectric IR Sensor or Microswitch!Dispensa-Matic U-45 Label Dispenser: Is a heavy-duty semi-automatic electric label dispenser for labels from 3/8"-4.5" widths x 3/8" to any length. This label dispenser advances at over 4" per second standard (Faster than so called High-Speed machines from competitors), and OVER 10" PER SECOND with our High-speed version!
$695.00 -
- Full Scrap Rewind
- Label Roll Diameter up to 12”
- Durable All Steel Frame with Powder Coat Finish
- Dispenses Die-cut or Butt-cut Labels
- Accommodates Multiple Labels on a Common Liner
- Shipping Weight: 13 Lbs.
- Maximum Web Width: 2.5"
- Maximum Roll Diameter: 12"
- Core Size: 1" or 3”
$290.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front Labeling Only- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 15" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,195.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front Labeling Only- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 9" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$1,995.00 -
- Maximum Web Width: 5"
- Maximum Roll Diameter: 8"
- Core Size: 1" or 3” Diameter
$59.00 -
- Maximum Web Width: 10”
- Maximum Roll Diameter: 8”
- Core Size: 1" or 3” Diameter
$69.00 -
Universal Label Re-Winder with 3" core plates and inner flange. For rolls up to 6" width.$550.00
-
Label bags, envelopes, CD/DVD cases
1200 Pcs. per hour!
fast and accurately- Label objects to 1/4" width.
- Able to handle most plastic bags without difficulty.
- Labels over 1200 pcs per hour with average dexterity.
- Photodetector activated, will work on all kinds of labels.
$2,895.00 -
- Labeling speed: 20~60 pcs/ min
(depends on container and label size) - Bottle size: Diameter .63" (16mm) - 3.54" (90mm)
- Height 1.18" (30mm) - 6.29" (160 mm)
- Label size: Width:.39" (10mm) ~ 3.93" (100mm)
- Length: .78" (20mm) ~ 11.81" (300mm)
- Label reel: Inner diameter 2.95" (75mm)
- Outer Diameter 11.81" (300mm)
- Accuracy: ± 1mm
- Voltage : 110V
- Machine size: 47.25"L x 32.65"W x 20.86"H
$9,675.00 - Labeling speed: 20~60 pcs/ min
-
-
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front & Back Labeling- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 9" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,345.00 -
Heavy-Duty Semi-Automatic Electric Label Dispenser
Ideal for Front & Back Labeling- Bottle Diameter: 1/2" - 6" Diameter
- Bottle Height: 2" - 15" Length
- Label Core: 3" Diameter Core
- Max Roll Size: 9" Diameter Roll
- Optional Upgrade: 15" Diameter Roll
- MADE IN USA
- 3 Year Warranty!
$2,545.00 -
Dispensers for labels from 3/8″-4″ widths on Simple Simon 4″ and from 3/8″ – 6 3/4″ widths to any length$85.00
-
Dispensers for labels from 3/8″-4″ widths on Simple Simon 4″ and from 3/8″ – 6 3/4″ widths to any length$95.00
-
Optically sensing and includes all options! Bottle and Cylindrical Label Applicator with Optical Sensor for .5" to 8" Diameters!$3,395.00
-
- Labeling speed: 20~60 pcs/ min
(depends on containers and labels size) - Bottle size: Diameter .63" (16mm) - 3.54" (90mm)
- Height 1.18" (30mm) - 6.29" (160 mm)
- Label size: Width:.39" (10mm) ~ 3.93" (100mm)
- Length: .78" (20mm) ~ 11.81" (300mm)
- Label reel: Inner diameter 2.95" (75mm)
- Outer Diameter 11.81" (300mm)
- Accuracy: ± 1mm
- Voltage : 110V
- Machine size: 65"L x 36"W x 24"H
$11,500.00 - Labeling speed: 20~60 pcs/ min
-
CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.
- Stainless Steel Construction
- Digital Thermostat (not shown)
- Product Counter (not shown)
- 1/2 HP Motor
- 2 Sets of Heating Blocks
- Right Feed
- Dry ink coding
- 110 volt
- 0-315”/min seal speed
- 8mm seal width
- 11.8” wide conveyor
$4,838.00 -
Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.
- Feed Direction
- Right to Left
- Left to Right
- Seal Width
- 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
- 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
- Sealing Capacity
- 6 mil single thickness gusseted bags
- 12 mil single thickness flat bags
- Temperature Control
- 600 ± 2 ºF
- 600 ± 2 ºF
- Speed
- Variable speed up to 750 inches per minute
$11,999.39 - Feed Direction
-
- Power - 220V/60Hz, Single Phase
- Draw - 41amps
- Tunnel size - 47" x 17.717”" x 13.75"
- Overall size - 63" x 23." x 51.2"
- Maximum load on conveyor - 11 lbs.
$2,557.00 -
Liquid Filling Line with Gear Filler Machine or Peristaltic Pump Machine
CFL200 Liquid Filling Line Machine: At a Glance
Quickly and confidently set up a bottle filling line in a small space. Start a more efficient production run for your business with this compact liquid packaging line machine. Fill up to one bottle per second with assistance from automated processes. Compatible with a wide range of liquid products.
- Volume range: 5 - 240ml per cycle
- Filling speed: up to 60 bottles /min depending on fill volume
- Filling accuracy: +/-1%
$38,995.00 -
Auto-Matic Bottle Detector option allows you to just insert your bottle and the labeler automatically activates.$150.00
-
- Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
- Max.Packing size 160 x 350H mm (6.29" x 13.78")
- Conveyor motor DC50W/220V
- Conveyor speed 0-10m/min
- Max.loading 15KGS (33 lb)
- Shrink film POF,PVC,PP
- Voltage 220V /60HZ, Single Phase, 9KW
- 36 Amps
- Dimension 1500x400x1520 mm (59" x 15.75" x 60")
- Dimension from floor to conveyor (adjustable) 23"-28"
$3,488.00 -
- Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
- Max.Packing size 160 x 350H mm (6.29" x 13.78")
- Conveyor motor DC50W/220V
- Conveyor speed 0-10m/min
- Max.loading 15KGS (33 lb)
- Shrink film POF,PVC,PP
- Voltage 220V /60HZ, Single Phase, 9KW
- 36 Amps
- Dimension 1500x400x1520 mm (59" x 15.75" x 60")
- Dimension from floor to conveyor (adjustable) 23"-28"
$3,488.00 -
- Tunnel size (mm) 1000x150x150
- Tunnel size (in) 39.4" x 6" x 6"
- Max.Packing size mm 105 x 350H
- Max.Packing size (in) 4.14" x 13.78"
- Conveyor motor AC90W/220V
- Conveyor speed 0-10m/min
- Max.loading 15KGS
- Shrink film POF,PVC,PP
- Voltage 220V /60HZ, Single Phase, 7KW
- 36 Amps
- Dimension (mm) 1500x350x1500
- Dimension (in) 59"x13.78"x59"
- Dimension from floor to conveyor (adjustable) 23"-28"
$3,488.00 -
The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.
- Bottom Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP drive motors
- Tape Speed: 20 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
As low as $11,900.00 -
- Side Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
The SB-EX Case Taper system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.As low as $5,150.00 -
Eastey's SB-EX Stainless Steel Case Taper offers the quality that you have come to rely on from Eastey. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.
- Side Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
- Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
- Dual 1/4 HP motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
-
Cleveland machinery manufactures standard conveyors for all our machines as well as custom conveyors for all of our customers. All of our conveyors are manufactured in stainless steel and have tool-less guide rail adjustments. We stock 4.5 and 7.5 inch straight conveyors in 10, 13, 16 and 20 feet lengths.$0.00
-
When it comes to convenience, you can’t do much better than this hand-held electric capping machine. It is easy to carry, and is mainly used for easy screwing (tightening) and unscrewing (loosening) of the cap.
Since the design has an adjustable clutch, it is suitable for all kinds of strength bottle capping work. Applying to bottle cap ranges of 10-50 mm, and single production capacities of up to 30-90 bottles / min, this convenient device is also highly effective.
Here are a few more details pertaining to this bottle capping machine, as well as some reviews to consider:
Capping diameter : 10-50mmProduction capacity: 15-20 bottles / minute (depending on proficiency)Bottle Height: not limitedTorque :5-25kgf.cm$295.00 -
Top & Bottom Case Sealer
Our industrial-grade semi-automatic box sealers are designed for both small- and large-scale businesses. Well-equipped with powerful, reliable motors and belt systems that are truly made to last, these industrial carton sealers provide clean and uniform seals on boxes small and large. Three heavy-duty motors allow these machines to run safer for longer, while intuitive, easy-to-use functions mean simple operation for your whole staff. Cleveland Equipment provides financing on carton sealers and can ship them to you in as little as 24 hours.
- Drive: Top and Side Belts
- Minimum Box Size: 5.9"(L) x 4.75"(W) x 6.5"(H)
- Maximum Box Size: 27"(W) x 27"(H)
- (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2" Tape Heads (3" Tape Heads Optional)
- Includes 16" Wide Infeed/Outfeed Tables ( Included )
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Switch
As low as $4,077.00 -
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
As low as $4,620.00 -
- Adjustable Guide Rails, Up To 7.5"
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
As low as $4,400.00 -
0.34 - 2.0 oz / 10ml - 60ml
Our piston filling machines are the ideal jar filling equipment for liquid fill and paste filling applications.As low as $4,189.00 -
Pneumatic conveyor small capacity pellet loader kit. Aluminum pneumatic loader with control panel and 1.25" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand. Ideal for feeding plastic extrusion machines and similar applications.
Best for materials that have no dust, such as clean pellets.
$2,725.00 -
- Adjustable Guide Rails, Up To 4.5"
- 90 V 1/8 Hp Gear Motor
- Speed Control
- Electrical Requirements: 115v/1/60
- Legs Are Height Adjustable 32-36" Height
Available in 6', 8', 10' & 12' lengths.
As low as $4,235.00 -
Top & Bottom Case Sealer
Cleveland Equipment semi-automatic box sealers are designed to help you save time and money. Adjustable belt systems allow you to tailor the machine to both small and large boxes for clean, uniform seals each and every time. Each carton sealer has a set of powerful, reliable 200 watt motors ( our competitors use under sized 120 watt motors ) and features user-oriented operations to make running it a breeze. Please make note of the breaker switch which is not offered by our competitors. In case of a power surge this will protect the electrical components. Our machines are well-suited for all levels in the packaging industry. We stock our machines so they are available to ship to you within 24 hours.
- Drive: Top and Side Belts
- Minimum Box Size: 5.9"(L) x 4.75"(W) 6.5"(H)
- Maximum Box Size: 19.6"(W) x 19.6"(H)
- (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2" Tape Heads (3" Tape Heads Optional)
- 16" Wide Infeed/Outfeed Tables ( Included )
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Stop
As low as $2,895.00 -
Eastey's SB-EX Random allows users to run a variety of case sizes without having to manually adjust for each box. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.
Machine Dimensions:- (L) 46in (1160mm)
- (W) 40.6in (1030mm)
- (H) 61in (1550Dimensions for SBEX Fully Auto
- (L) 46in (1160mm)
- (W) 40.6in (1030mm)
- (H) 61in (1550mmmm
- Top & Bottom Belt Drive
- Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: ∞"(L) x 23"(W) x 23"(H)
- Dual 1/4 HP drive motors
- Tape Speed: 30 cases/min
- Belt Speed: 75ft/min
- Power Supply 110 VAC, 60Hz, 6A
As low as $10,300.00 -
- Filling Range 10–5000 ml
- Filling Accuracy ± 1 %
- Power Supply 110v; 50/60 Hz; Single phase
- Driven Device DC Motor
- Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)
$4,395.00 -
BOX CODE PRINTER
Mount on any of our carton sealers!
- CoPilot uses proven Xaar piezo technology resulting in razor-sharp print
- Print up to .7″ of hi-resolution characters, bar codes, and logos at 185 dpi
- CoPilot’s 4.3″ full color touchscreen
- Compatible with Squid Ink’s easy-to-use Orion™ message software
** Ink not included with printer purchase
The CoPilot Hi-Resolution Printing System utilizes oil-based inks for printing on a wide range of porous substrates.
Not compatible with solvent-based inks / non-porous substrates.*
** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.$2,695.00 -
Top & Bottom Case Sealer
Semi-automatic carton sealers are great to have on hand if you need to pack many boxes of different sizes. With intuitive, easy-to-use functions, these box tapers are fast and efficient to help you save time and money. These smart carton sealers are adjustable and create clean, uniform seals across any carton. Simply and quickly adjust the machine to the width and height of the box you're sealing and it will apply the same amount of tape to each box. They're designed to work best when sealing many boxes of the same size during each product run.
- Drive: Top and Bottom Belts
- Minimum Box Size: 5.9"(L) x 6.5"(W) x 5"(H)
- Maximum Box Size: 19.6"(W) x 19.6"(H)
- 2 Heavy Duty 120 Watt Motors ( Competitors use 90 watt motors )
- Belt Speed: 59'/ minute (18m/min)
- 2 " Tape Heads (3" Tape Heads optional)
- Power: 110V 60HZ
- Breaker Switch ( Not found on competitors machines )
- Emergency Stop
- 4 Casters ( Included )
- 16 inch Infeed/Exit Tables ( Included )
As low as $2,395.00 -
*Designed for small boxes
Minimum box size 7 x 3.14 x 3.94
Maximum box size 10 x 7.87 x 7.87
Output is estimated at 12-15 boxes / min.$26,795.00 -
Polypropylene tape water based acrylic adhesive
- Acrylic 2” x 1,000 yards 2.0 mil
- (6 Rolls / Case)
- Film: Biaxially Oriented Polypropylene (BOPP)
- Total Thickness: 2.0 mils (nominal)
- Adhesive: Emulsion Acrylic
- Color: Clear
- Tensile Strength (lbs/in): 24 PSTC-131* (ASTM D3759**)
- Elongation (% at break): 140 PSTC-131 (ASTM D3759)
- 180° Peel Adhesion (oz/in): 24 PSTC-101 (ASTM D3759***)
- Resistance to UV Lighting: Excellent
- Application Temperature: 32° to 140° F
- Operating Temperature: -10° to 200° F – normal range
$123.48 As low as $98.52 -
Polypropylene tape water based acrylic adhesive
- Acrylic 3” x 1,000 yards 2.0 mil
- (4 Rolls / Case)
- Film: Biaxially Oriented Polypropylene (BOPP)
- Total Thickness: 2.0 mils (nominal)
- Adhesive: Emulsion Acrylic
- Color: Clear
- Tensile Strength (lbs/in): 24 PSTC-131* (ASTM D3759**)
- Elongation (% at break): 140 PSTC-131 (ASTM D3759)
- 180° Peel Adhesion (oz/in): 24 PSTC-101 (ASTM D3759***)
- Resistance to UV Lighting: Excellent
- Application Temperature: 32° to 140° F
- Operating Temperature: -10° to 200° F – normal range
$123.52 As low as $98.52 -
-
The SB-2HD’s side belts are great for light or heavyweight, narrow or small boxes. The system is ideal for void fill cases where the packaged product does not support the box. SB-2HD is designed to handle boxes that most other case tapers can’t. SB-2HD offers fast and easy case changes with adjustable side rails and flexibility for boxes 4.5” long and as narrow as 4” wide and as low as 2” tall.
- Side belt, top and bottom case sealer
- Belt Speed – 72 feet/per minute
- Tape Speed – 30 cases/per minute, depending on box size and operator efficiency
- No air required
- Minimum Box Size: 4.5” (L) x 4.0” (W) x 2.0” (H)
- Maximum Box Size: Infinite (L) x 20” (W) x 25.5” (H)
As low as $8,050.00 -
- Sealing Speed: 0-16 m/min
- Sealing Width: 8-10 mm
- Sealing Temperature: 0-300° C
- Film Thickness: ≤.08mm
- Max Bag Weight: ≤ 1kg
- Max Conveyor Weight: ≤ 3kg
- Horizontal Only
$2,745.00 -
- Maximum Seal Length: 12 inches
- Max. Seal Thickness: 8 mil
- 12" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 12 Inches (300 mm)
- Max. Seal Thickness: 6 mil
- Seal Width: 0.12 inch (3mm)
- Heat Time: 0-3.5 (sec)
$107.00 -
The BB-2 Bottom Belt Stainless Steel Industrial Case Taper is a cost-effective top and bottom case taper designed for large run case sealing. The BB-2 utilizes pressure-sensitive tape and features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes.
- Bottom Belt Drive
- wash-down NEMA 4
- Includes 1 pack table
- Minimum Box Size: 5"(L) x 6"(W) x 4"(H)
- Maximum Box Size: ∞"(L) x 21"(W) x 20.5"(H)
- Single drive motor
- Tape Speed: 30 cases/min
- Belt Speed: 60ft/min
- Power Supply 110 VAC, 60Hz, 6A
-
- Maximum Seal Length: 16 inches
- Max. Seal Thickness: 8 mil
- 16" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 16 inch(400 mm )
- Max. Seal Thickness: 6 mil
- Seal Width: 0.12 inch (3mm)
- Heat Time: 0-3.5 (sec)
$118.00 -
- Maximum Seal Length: 8 inches
- Max. Seal Thickness: 6 mil
- 8" Hand Operated Impulse Sealer PSF-200
- Maximum Seal Length: 8 inch (200 mm)
- Max. Seal Thickness: 6 mil
- Seal Width: 3/16 Inches (5 mm)
- Heat Time: 0-3.5 (sec)
$63.00 -
2.5 - 16.9 oz / 75ml - 500ml
$4,485.00 -
1.5 - 8.5 oz / 45ml - 250ml
$4,385.00 -
0.34 - 2.0 oz / 10ml - 60ml
0.34 - 2.0 oz / 10ml - 60ml$5,445.00 -
4.0 - 33.5 oz / 120ml - 1000ml
$4,675.00 -
0.34 - 2.0 oz / 10ml - 60ml
$4,189.00 -
- Bottom Belt Drive
- Minimum Box Size: 5"(L) x 6"(W) x 4"(H)
* May be able to run smaller boxes with testing - Maximum Box Size: ∞"(L) x 21"(W) x 20.5"(H)
- Single drive motor
- Tape Speed: 30 cases/min
- Belt Speed: 60ft/min
- Power Supply 110 VAC, 60Hz, 6A
The BB-2 Bottom Belt Industrial Case Taper is a cost-effective top and bottom case taper designed for large run case sealing. The BB-2 utilizes pressure-sensitive tape and features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes.
As low as $4,325.00 -
1.0 - 4.0 oz / 30ml - 120ml
$5,769.00 -
1.5 - 8.5 oz / 45ml - 250ml
1.5 - 8.5 oz / 45ml - 250ml$6,049.00 -
4.0 - 33.5 oz / 120ml - 1000ml
$7,255.00 -
- Infeed Hopper Capacity: 100L
- Dispensing Height: 69"
- Bucket volume: 1.8L
- Bucket size: 16.5" L x 5.5" W x 2.76"H
- Dispersing Height 69"
- Lifting speed 2.5 - 5 cubic meter/hour
- Power 550w Voltage 220v
- Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
- Specification The parts contacted with food are food grade plastic
- Requires Assembly*
$14,450.00 -
- Top and bottom belt drives
- Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
- PLC controlled
- Adjusted manually for box width by crank handle
- Infeed push-carton conveyor Box height adjustment is motor-driven (up/down movement)
- Locking casters standard
- Easy operation and maintenance
- Built for 24/7 Operation
- Adjustable leg supports
$24,900.00 -
- Speed: Up to 720 Cases/Hour (65 fpm)
- Case Length: 6" minimum – no maximum
- Case Width: 4.75" minimum – 20" maximum
- Case Height: 6" minimum – 20" maximum
$7,900.00 -
Top & Bottom Case Sealer
- Speed: Up to 2,400 Cases/Hour (65 fpm)
- Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
- Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
- Electrical: 110VAC-1PH-60Hz – 10 Amps
- Air: None
- Casters are included in the standard unit.
- Dimensions: 51.5"L x 38"W x 56"H
$5,159.00
CE-551TB Uniform Semi-Automatic Carton Sealer
$2395
Best Value on the Market PERIOD!!!
CBD / Essential Oils
Equipment
Packaging equipment for Essential Oils and Organics start up and small businesses from fillers and counters to capping and labeling equipment. Cleveland offers a variety of economical machines to safely and efficiently increase your staff's production.
