Search results for: 'heat sealers l bar sealers'

L-bar sealers use center fold film to protect your products and give them an attractive, professional look. Cleveland Equipment's CEFQL380 L-Bar Sealer is easy to use and to maintain and is an excellent L-sealer for many types of products. Weighing 77 pounds, this machine can handle maximum sealing dimensions of 19.65" x 13.75". It's small enough to set up on a tabletop or desk.

L-Bar Element Kit

CE-4500HVE Vertical Band Sealer is a Vertical, Free Standing, Coding continuous band sealer that is suitable for sealing  stand up pouches, liquid-type products, and all types of thermoplastic materials and bags. Perfect for application in the food, medical, and cosmetic industries. The CE-4500HVE is  suitable for a wide range of bag heights with an adjustable sealing head and conveyor. Equipped with dry ink coding to print numbers or letters on the seal line.

• Stainless Steel Construction
• Digital Thermostat (not shown)
• Product Counter (not shown)
• 1/2 HP Motor
• 2 Sets of Heating Blocks
• Right Feed
• Dry ink coding
• 110 volt
• 0-315”/min seal speed
• 8mm seal width
• 11.8” wide conveyor

 

• • Sealing and shrinking in one station
  • Single person easy operation
  • Economical for low volume production.
  • Power Supply 220V/60Hz, Single Phase.
  • Standard shrink film:  POV, POF, PP
  • Max Package size: 15.75 x 15.75 x 5 in.

• 20" Hand Operated Impulse Sealer
• Maximum Seal Length: 20 inches
• Max. Seal Thickness: 8 mil
• Seal Width: 3 mil

This single chamber vacuum sealer featuring dual sealing bars, one on each side is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

 

• Sealing and shrinking in one station
• Single person easy operation
• Economical for low volume production.
• Standard shrink film:  POV, POF, PP
• Max Sealing Size: L 21.65" (550mm) x W 15.75" (400mm)
• Power supply: 220-240V / 50-60Hz, Single Phase - wire only

• 8" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 8 inch (200 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 3/16 Inches (5 mm)
• Heat Time: 0-3.5 (sec)

This dual chamber vacuum sealer featuring dual sealing bars, one on each side or each chamber is ideal for sealing food, pharmaceutical, chemical, electronic and other items. Depending on your bag size you could seal 1-8 bags per cycle.

• 12" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 12 Inches (300 mm)
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

• 16" Hand Operated Impulse Sealer PSF-200
• Maximum Seal Length: 16 inch(400 mm )
• Max. Seal Thickness: 6 mil
• Seal Width: 0.12 inch (3mm)
• Heat Time: 0-3.5 (sec)

CEFS-F350 14" Foot Operated Impulse Sealer

CEFS-F450 18" Foot Operated Impulse Sealer

CEFS-F650 26" Foot Operated Impulse Sealer

Multi-purpose machine can be used for both polyethylene and barrier film applications. Sealing is accomplished by the material passing through two 10" heated bars separated by Teflon sealing bands.

• Feed Direction
  • Right to Left
  • Left to Right
    
    
• Seal Width
  • 3/8" or 3/4" standard; 1/8", 1/4", or 1/4" double seal optional
    
    
• Sealing Capacity
  • 6 mil single thickness gusseted bags
  • 12 mil single thickness flat bags
    
    
• Temperature Control
  • 600 ± 2 ºF
    
    
• Speed
  • Variable speed up to 750 inches per minute

This single chamber vacuum sealer is ideal for sealing food, pharmaceutical, chemical, electronic and other items. It is very easy to use and requires little maintenance.

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.

The machine features one (1) seal bar that is approx. 10" wide. The open area in the chamber is about 10" x 13.5" (this does not include the area taken up by the seal bar). Simply set the optimal vacuum time, sealing time, cooling time, and sealing temperature for your bags and away you go.

Top & Bottom Case Sealer

• Drive: Side Belts
• Minimum Box Size: 7.9"(L) x 5.9"(W) x 4.7"(H)
• Maximum Box Size: 19.6"(L) x 19.6"(W) x 19.6"(H)
• Heavy Duty 200 Watt Motors (2)
• Belt Speed: 59'/ minute (18m/min)
• Power: 110V 60Hz

 

Two in One Bag Sealer Machine! Horizontal / Vertical Configurations with Ink Print Wheel

The CE-3000-HVE Continuous Band Sealer with built-in printer is a great bag sealer for small- and large-scale companies that want reliability and versatility at once. Featuring a unique configuration that allows it to sit both vertically or horizontally, this high-quality bag sealer also uses an electronic temperature control system and a speed adjusting transmission to give the user all the control. These top-quality machines are designed to work with bags up to 18 inches tall and even feature built-in solid-ink coding devices that print clear characters on the package in instant-dry permanent ink. Our band sealers can handle various types of plastics, including mylar, single or composed bags.

The standard machine will seal a bag vertically 10"-18" H. With the height reducing bracket the machine will seal a bag vertically 4"-10.5" H.

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 38"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Top & Bottom Case Sealer

Our industrial-grade semi-automatic box sealers are designed for both small- and large-scale businesses. Well-equipped with powerful, reliable motors and belt systems that are truly made to last, these industrial carton sealers provide clean and uniform seals on boxes small and large. Three heavy-duty motors allow these machines to run safer for longer, while intuitive, easy-to-use functions mean simple operation for your whole staff. Cleveland Equipment provides financing on carton sealers and can ship them to you in as little as 24 hours.

• Drive: Top and Side Belts
• Minimum Box Size: 5.9"(L) x 4.75"(W) x 6.5"(H)
• Maximum Box Size: 27"(W) x 27"(H)
• (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2" Tape Heads (3" Tape Heads Optional)
• Includes 16" Wide Infeed/Outfeed Tables ( Included )
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Switch

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.5"(W) x 3"(H)
• Maximum Box Size: ∞"(L) x 20"(W) x 20"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

Top & Bottom Case Sealer

• Speed: Up to 2,400 Cases/Hour (65 fpm)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: No Max(L) x 27"(W) x 37"(H)
• Electrical: 110VAC-1PH-60Hz – 10 Amps
• Air: None
• Casters are included in the standard unit.
• Dimensions: 51.5"L x 38"W x 56"H

• 1/8" Seal width x 20" seal length
• 60 second Adjustable Timers for Heat and Cool
• Electronic Temperature control
• Start button
• Includes 2 standard Tube Racks
• Welded steel case with Powder coat finish

Top & Bottom Case Sealer

Cleveland Equipment semi-automatic box sealers are designed to help you save time and money. Adjustable belt systems allow you to tailor the machine to both small and large boxes for clean, uniform seals each and every time. Each carton sealer has a set of powerful, reliable 200 watt motors ( our competitors use under sized 120 watt motors ) and features user-oriented operations to make running it a breeze. Please make note of the breaker switch which is not offered by our competitors. In case of a power surge this will protect the electrical components. Our machines are well-suited for all levels in the packaging industry. We stock our machines so they are available to ship to you within 24 hours.

• Drive: Top and Side Belts
• Minimum Box Size: 5.9"(L) x 4.75"(W) 6.5"(H)
• Maximum Box Size: 19.6"(W) x 19.6"(H)
• (3) Heavy Duty 200 Watt Motors ( Competitors use 120 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2" Tape Heads (3" Tape Heads Optional)
• 16" Wide Infeed/Outfeed Tables ( Included )
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Stop

Element kit for CEFS-F350 Foot Sealer - 14"

Element kit for CEFS-F450 Foot Sealer - 18"

Element kit for CFES-F650 Foot Sealer - 26"

Top & Bottom Case Sealer

Semi-automatic carton sealers are great to have on hand if you need to pack many boxes of different sizes. With intuitive, easy-to-use functions, these box tapers are fast and efficient to help you save time and money. These smart carton sealers are adjustable and create clean, uniform seals across any carton. Simply and quickly adjust the machine to the width and height of the box you're sealing and it will apply the same amount of tape to each box. They're designed to work best when sealing many boxes of the same size during each product run.

• Drive: Top and Bottom Belts
• Minimum Box Size: 5.9"(L) x 6.5"(W) x 5"(H)
• Maximum Box Size: 19.6"(W) x 19.6"(H)
• 2 Heavy Duty 120 Watt Motors ( Competitors use 90 watt motors )
• Belt Speed: 59'/ minute (18m/min)
• 2 " Tape Heads (3" Tape Heads optional)
• Power: 110V 60HZ
• Breaker Switch ( Not found on competitors machines )
• Emergency Stop
• 4 Casters ( Included )
• 16 inch Infeed/Exit Tables ( Included )

Model	Sealing Diameter
CE-905A	20 to 100 mm
CE-905B	15 to 35 mm

The SB-2EX AUTO is an automatic uniform side belt case taper designed to close all four top case flaps and seal the top and bottom. The adjustable plow system provides the utmost flexibility for varying types of carton sealing applications and provides a great alternative to hand taping. The SB-2EX AUTO will seal up to 20 cases per minute.

• Bottom Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
  * May be able to run smaller boxes with testing
• Maximum Box Size: 24"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP drive motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

Model	CE-975
voltage	220V 60HZ
Sealing Current	Static 2A / Dynamic 10A
Power	2000W
Capacity	1-30 ft. / min
Sealing Diameter	0.75" to 4.75"
Height of bottles	1.57" to 15.5"
Machine weight	155 lbs
Machine size	61" x 22" x 53" Conveyor height from floor 31.5"

Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

Heated Mixing Hopper

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

Solid Ink Coding Aerating/Air Suction

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

• Construction Infrared Quartz Heating Tubes
• Capacity 17.717”” W x 9 ¾” H
• Output 0-30ft/min
• Range 0-300 Degrees Celsius
• Dimensions 48”x24”x31”
• Power Supply •220 VAC Single Phase, 60hz, 34amp - Wire Only

Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum

 

• Sealing Speed: 0-16 m/min
• Sealing Width: 8-10 mm
• Sealing Temperature: 0-300° C
• Film Thickness: ≤.08mm
• Max Bag Weight: ≤ 1kg
• Max Conveyor Weight: ≤ 3kg
• Horizontal Only

• Speed: Up to 720 Cases/Hour (65 fpm)
• Case Length: 6" minimum – no maximum
• Case Width: 4.75" minimum – 20" maximum
• Case Height: 6" minimum – 20" maximum

Heated Hopper for SGP Series, 8 gal.

Heated Hopper with Mixer for SGP Series, 4.5 gal.

Case Length: 6" minimum — 20" maximum

Case Width: 6" minimum — 20" maximum Case

Height: 4.5" minimum — 20" maximum

Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps

• Speed:          0-10 m/min
• Tunnel Size:  800x400x200 mm
                     31.5 x 15.75 x 7.9 in.
• Load:          5Kg (11 lbs)

• Conveyor speed 0-10m/min
• Max.packaging size 3.15 x 11.4 inches (80x290mm)
• Tunnel size 39.37 x 4 x 12.5 Inches (1000x100x320 mm)
• Max.loading 33lbs (15kg)
• Shrink film POF,PVC,PP

BOX CODE PRINTER

Mount on any of our carton sealers!

• CoPilot uses proven Xaar piezo technology resulting in razor-sharp print
• Print up to .7″ of hi-resolution characters, bar codes, and logos at 185 dpi
• CoPilot’s 4.3″ full color touchscreen
• Compatible with Squid Ink’s easy-to-use Orion™ message software

 ** Ink not included with printer purchase

The CoPilot Hi-Resolution Printing System utilizes oil-based inks for printing on a wide range of porous substrates.

Not compatible with solvent-based inks / non-porous substrates.*

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

• Tunnel size (mm) 1000x150x150
• Tunnel size (in) 39.4" x 6" x 6"
• Max.Packing size mm 105 x 350H
• Max.Packing size (in) 4.14"  x 13.78"
• Conveyor motor AC90W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 7KW
• 36 Amps
• Dimension (mm) 1500x350x1500
• Dimension (in) 59"x13.78"x59"
• Dimension from floor to conveyor (adjustable) 23"-28"

• Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
• Max.Packing size 160 x 350H mm (6.29" x 13.78")
• Conveyor motor DC50W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS (33 lb)
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 9KW
• 36 Amps
• Dimension 1500x400x1520 mm (59" x 15.75" x 60")
• Dimension from floor to conveyor (adjustable) 23"-28"

• Tunnel size 800x200x400 mm (31.49" x 7.87" x 15.75")
• Max.Packing size 160 x 350H mm (6.29" x 13.78")
• Conveyor motor DC50W/220V
• Conveyor speed 0-10m/min
• Max.loading 15KGS (33 lb)
• Shrink film POF,PVC,PP
• Voltage 220V /60HZ, Single Phase, 9KW
• 36 Amps
• Dimension 1500x400x1520 mm (59" x 15.75" x 60")
• Dimension from floor to conveyor (adjustable) 23"-28"

The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.

• Available with leg supports in 2 heights;
  18-1/4” to 24-1/4” Height
  26-1/4” to 32-1/4” Height
• 1.9” Dia. Rollers
• Rollers on 3” Centers
• 24” Overall Width
• 21” Between Frame

The gravity conveyor table is among the simplest and most versatile types of conveyors. You can use this gravity conveyor for either temporary or permanent installations.

• Available with leg supports in 2 heights;
  18-1/4” to 24-1/4” Height
  26-1/4” to 32-1/4” Height
• 1.9” Dia. Rollers
• Rollers on 3” Centers
• 24” Overall Width
• 21” Between Frame

• Power - 220V/60Hz, Single Phase
• Draw - 41amps
• Tunnel size - 47" x 17.717”" x 13.75"
• Overall size - 63" x 23." x 51.2"
• Maximum load on conveyor - 11 lbs.

• Adjustable Guide Rails, Up To 4.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

Available in 6', 8', 10' & 12' lengths.

• Minimum Box Size: 7"(L) x 7"(W) x 4"(H)
• Maximum Box Size: 23.5"(L) x 19.5"(W) x ∞(H)
• Emergency stop switch
• Locking casters
• Air: 1 CFM at 60 PSI
• Electrical: None required
• 1 year on parts

• Adjustable Guide Rails, Up To 7.5"
• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

• 90 V 1/8 Hp Gear Motor
• Speed Control
• Electrical Requirements: 115v/1/60
• Legs Are Height Adjustable 32-36" Height

The side belt driven Easy Packer is designed for compact, packing and sealing. The durable design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum. The Easy Packer provides a fast and cost-efficient alternative to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• * May be able to run smaller boxes with testing
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

8" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths

16" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths

12" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths

20" Replacement element kit: 2 Heating Elements & 2 Teflon Cloths

The SB-2HD’s side belts are great for light or heavyweight, narrow or small boxes. The system is ideal for void fill cases where the packaged product does not support the box. SB-2HD is designed to handle boxes that most other case tapers can’t. SB-2HD offers fast and easy case changes with adjustable side rails and flexibility for boxes 4.5” long and as narrow as 4” wide and as low as 2” tall. 

•  Side belt, top and bottom case sealer
•  Belt Speed – 72 feet/per minute
•  Tape Speed – 30 cases/per minute, depending on box size and operator efficiency
•  No air required
•  Minimum Box Size: 4.5” (L) x 4.0” (W) x 2.0” (H)
•  Maximum Box Size: Infinite (L) x 20” (W) x 25.5” (H)

• Speed: 25 carriers per minute.
• Easy Change Over from 4 to 6 Packs
• Compact Footprint
• Allen Bradley Controls
• 220V 3-Phase
• FOOTPRINT: 142"L x 47"W x 103"H

• Filling Range 10–5000 ml
• Filling Accuracy ± 1 %
• Power Supply 110v; 50/60 Hz; Single phase
• Driven Device DC Motor
• Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

• Line Speeds up to 25 Carriers per Minute
• Compact Footprint
• Erects 4 or 6 Pack Carriers
• Less Than 5 Minute Change-Over
• Allen Bradley Controls
• 18 SCFM/Cycle @80 PSI
• 110V Electrical
• FOOTPRINT: 39"L x 39"W x 23.5"H

• Industrial Capsule Counting Bottle Filler
• Bottle: Diameter: 1.89" - 3.93" (48-100mm) / Height: 4.56" (116mm)
• Capsule size: Diameter > 6mm, H > 3mm
• Tablet size: 2~30mm
• Accuracy: ± 1 tablet
• Counting speed: 600~1000 pcs/min
• Voltage : 110V
• Dimension: (L) 29.5" x (W) 21.65" (H) 29.5"

Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)

Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)

Speed – Up to 15 cases a minute

• Labeling speed: 20~60 pcs/ min
  (depends on containers and labels size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 65"L x 36"W x 24"H

• Labeling speed: 20~60 pcs/ min
  (depends on container and label size)
• Bottle size: Diameter .63" (16mm) - 3.54" (90mm) 
• Height 1.18" (30mm) - 6.29" (160 mm)
• Label size: Width:.39" (10mm) ~ 3.93" (100mm) 
• Length: .78" (20mm) ~ 11.81" (300mm)
• Label reel: Inner diameter 2.95" (75mm)
• Outer Diameter 11.81" (300mm)
• Accuracy: ± 1mm
• Voltage : 110V
• Machine size: 47.25"L x 32.65"W x 20.86"H

• Simple to operate
• Heavy Duty Construction
• LCD Screen and PLC
• Programmable wrap pattern 
• Single button automatic cycle start
• Emergency stop button
• Variable film carriage speed
• Auto load height photo-eye
• Manual controls

• Max Pallet Size:                  50” W x 50” L x 98” H
• Machine Dimensions:          96.5" L x 59" W x 109.5" H
• App. Shipping Weight:          1,300 Lbs.
• Power Requirements:          120V / 1Ph / 15A Dedicated Service
• Maximum Load Weight:        4000 Lbs

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

• Power Supply:110V
• Min Carton size: 9.84 " L x 5.90" W x 3.94” H (250 x 150 x 100 mm)
• Max Carton Size: 21.65 " L x 15.75" W x 15.75” H (550 x 400 x 400 mm)
• Working speed: 12ctns/min
• Machine size: 79"L x 74"W x 57"H
• Machine weight: 990 lbs

• Infeed Hopper Capacity: 100L
• Dispensing Height: 69"
• Bucket volume: 1.8L
• Bucket size: 16.5" L x 5.5" W x 2.76"H
• Dispersing Height 69"
• Lifting speed 2.5 - 5 cubic meter/hour
• Power 550w Voltage 220v
• Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
• Specification The parts contacted with food are food grade plastic
• Requires Assembly*

• Machine Dimensions 37" L x 27" W x 48" H
• Adjustable Height 37 TO 43 INCHES
• Belt Dimensions 36" L x 3/4" W x 1" H
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Machine Dimensions 37" L x 24.5" W x 44" H
• Adjustable Height 35.5 TO 42 INCHES
• Angle Adjustment For Tapered Bottles
• Belt Dimensions 1”H x 36” L x ¾” Thickness
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Up To 12 Cases per Minute!
• Minimum Case Width = 8"
• Maximum Case Width = 22"
• Minimum Case Height = 4"
• Maximum Case Height = 37"*
• Maximum KD Case (L + W) = 44"
• FOOTPRINT: 105" L x 91.75" W x 88.5" H
• Stainless Steel Upgrade Available!

Hot Glue Sealing System

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 28"
• Maximum Case Height = 30"*
• FOOTPRINT: 109" L x 68" W x 77.5" H
• Stainless Steel Upgrade Available!

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 29"
• Maximum Case Height = 30"*
• FOOTPRINT: 82.5" L x 67" W x 80" H
• Stainless Steel Upgrade Available!

Eastey's SB-EX Stainless Steel Case Taper offers the quality that you have come to rely on from Eastey. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 30 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

Eastey's SB-EX Random allows users to run a variety of case sizes without having to manually adjust for each box. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

Machine Dimensions: