Search results for: 'knowledge base what is a semi automatic case taper 77'

The SB-2HD’s side belts are great for light or heavyweight, narrow or small boxes. The system is ideal for void fill cases where the packaged product does not support the box. SB-2HD is designed to handle boxes that most other case tapers can’t. SB-2HD offers fast and easy case changes with adjustable side rails and flexibility for boxes 4.5” long and as narrow as 4” wide and as low as 2” tall. 

•  Side belt, top and bottom case sealer
•  Belt Speed – 72 feet/per minute
•  Tape Speed – 30 cases/per minute, depending on box size and operator efficiency
•  No air required
•  Minimum Box Size: 4.5” (L) x 4.0” (W) x 2.0” (H)
•  Maximum Box Size: Infinite (L) x 20” (W) x 25.5” (H)

Minimum Box Size – 7″ (Length) 5″ (Width) 5″ (Depth)

Maximum Box Size – 19.5″ (Length) 15.5″ (Width) 19.5″ (Depth)

Speed – Up to 15 cases a minute

Speed: Up to 300 Cases/Hour (65 fpm belt speed)
Case Length: 6" minimum – 30" maximum
Case Width: 4" minimum – 27" maximum
Case Height: 6" minimum – 20" maximum

The BB-2 Bottom Belt Stainless Steel Industrial Case Taper is a cost-effective top and bottom case taper designed for large run case sealing. The BB-2 utilizes pressure-sensitive tape and features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes.

• Bottom Belt Drive
• wash-down NEMA 4
• Includes 1 pack table
• Minimum Box Size: 5"(L) x 6"(W) x 4"(H)
• Maximum Box Size: ∞"(L) x 21"(W) x 20.5"(H)
• Single drive motor
• Tape Speed: 30 cases/min
• Belt Speed: 60ft/min
• Power Supply 110 VAC, 60Hz, 6A

This semi-automatic capper machine has speeds of 20-25 bpm, and is designed for 22-110 mm screw caps and bottle heights ranging from 50-260 mm. With an adjustable capping height (as well as speed), this screw capping machine has the flexibility you need.

Featuring a stainless steel body along with stainless steel stand and casters, this machine has the strength and durability your process requires. Additional benefits to this design are such features as a sensor detection system. This means that if there is no bottle, then no capping occurs.

This machine also has a microprocessor, enabling user-friendly control, as well as an emergency stop button.

It is important to note that caps have to be fed manually into this machine. It should not be washed down. Instead, it needs to be wiped down when cleaning. Here is some additional information and reviews pertaining to this bottle capping machine:

• Capping speed: 20-25 bpm
• Suitable for 22-110 mm screw cap
• Bottle height: 50-260 mm
• THIS IS NOT A WASH DOWN UNIT. IT IS A WIPE DOWN UNIT ONLY

• Minimum Box Size: 7"(L) x 7"(W) x 4"(H)
• Maximum Box Size: 23.5"(L) x 19.5"(W) x ∞(H)
• Emergency stop switch
• Locking casters
• Air: 1 CFM at 60 PSI
• Electrical: None required
• 1 year on parts

• Speed: Up to 700 Cases/Hour (65 fpm belt speed)
• Minimum Box Size: 6"(L) x 4.75"(W) x 4.5"(H)
• Maximum Box Size: 30" (L) x 20" (W) x 20" (H)
• Electrical: 110VAC--60Hz – 10 Amps
• Air: 1 SCFM @ 70 psi
• Dimensions: 75"L x 38"W x 63"H
• Weight: 650 lbs

Eastey's SB-EX Stainless Steel Case Taper offers the quality that you have come to rely on from Eastey. The system's unique and simple design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum and providing fast and efficient alternatives to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 30 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

Minimum Box: 5” (L) x 3.14 (W) x 3.54” (H)
Maximum Box: ∞ (L) x 12” (W) x 12” (H)
Power Source: 110V / 60 Hz
No Air Required!

• Construction: Industrial strength 12 gauge steel
• Powder coated for durability
• Conveyor Height: Adj. 27" to 34.6"
• Air Requirements: 80 PSI
• Electrical Requirements: None
• CE Certification

Hot Glue Sealing System

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 28"
• Maximum Case Height = 30"*
• FOOTPRINT: 109" L x 68" W x 77.5" H
• Stainless Steel Upgrade Available!

• Up To 15 Cases per Minute!
• Minimum Case Length = 6"
• Minimum Case Width = 4.5"
• Minimum Case Height = 4"
• Maximum Case Width = 14"
• Maximum KD Case (L + W) = 29"
• Maximum Case Height = 30"*
• FOOTPRINT: 82.5" L x 67" W x 80" H
• Stainless Steel Upgrade Available!

• Up To 12 Cases per Minute!
• Minimum Case Width = 8"
• Maximum Case Width = 22"
• Minimum Case Height = 4"
• Maximum Case Height = 37"*
• Maximum KD Case (L + W) = 44"
• FOOTPRINT: 105" L x 91.75" W x 88.5" H
• Stainless Steel Upgrade Available!

Small to Medium sized companies moving from hand filling to automated filling of bulk sized cartons and bags

• Fill Range:10 lbs to 75 lbs range
• Output Speed:Up to 300-400 fills/hour*
• Capacity:Bulk filling for weights of up to 75lbs
• Single Head

The CE-S5 semi-automatic scale has automatic tare, automatic feed and speed controls for both bulk and dribble feed rates, and automatic set points.

The side belt driven Easy Packer is designed for compact, packing and sealing. The durable design has proven to be one of the most reliable case tapers on the market today, keeping production and maintenance efforts to a minimum. The Easy Packer provides a fast and cost-efficient alternative to hand taping.

• Side Belt Drive
• Minimum Box Size: 5"(L) x 4.5"(W) x 4.5"(H)
• * May be able to run smaller boxes with testing
• Maximum Box Size: ∞"(L) x 19.5"(W) x 19.5"(H)
• Dual 1/4 HP motors
• Tape Speed: 20 cases/min
• Belt Speed: 75ft/min
• Power Supply 110 VAC, 60Hz, 6A

Speed: Up to 2,400 Cases/Hour (65 fpm)
Case Length: 6" minimum – no maximum
Case Width: 7" minimum – 20" maximum
Case Height: 4.5" minimum – 20" maximum
Electrical: 110VAC-1PH-60Hz – 10 Amps
Air: None
Dimensions: 40"L x 31"W x 50-65"H
Weight: 300 lbs

Polypropylene tape water based acrylic adhesive 

• Acrylic 3” x 1,000 yards 1.8 mil
• (4 Rolls / Case)
• Film:   Biaxially Oriented Polypropylene
• Total Thickness:  1.8mils (nominal)
• Adhesive:  Emulsion Acrylic
• Color(s):   Clear
• Tensile Strength (lbs/in):      22        PSTC-131*    (ASTM D3759**)
• Elongation (% at break):      140     PSTC-131     (ASTM D3759)
• 180° Peel Adhesion (oz/in):  22        PSTC-101     (ASTM D3759***)
• Persistance to UV Lighting:    Excellent      
• Application Temperature       32° to 140° F            
• Operating Temperature        -10° to 200° F – normal range

Polypropylene tape water based acrylic adhesive

• Acrylic 2” x 1,000 yards 2.0 mil
• (6 Rolls / Case)
• Film:  Biaxially Oriented Polypropylene (BOPP)
• Total Thickness: 2.0 mils (nominal)
• Adhesive: Emulsion Acrylic 
• Color:  Clear
• Tensile Strength (lbs/in):     24     PSTC-131*  (ASTM D3759**)
• Elongation (% at break):     140    PSTC-131   (ASTM D3759)
• 180° Peel Adhesion (oz/in): 24     PSTC-101   (ASTM D3759***)
• Resistance to UV Lighting:   Excellent
• Application Temperature:     32° to 140° F
• Operating Temperature:      -10° to 200° F – normal range

Polypropylene tape water based acrylic adhesive

• Acrylic 3” x 1,000 yards 2.0 mil
• (4 Rolls / Case)
• Film:  Biaxially Oriented Polypropylene (BOPP)
• Total Thickness: 2.0 mils (nominal)
• Adhesive: Emulsion Acrylic 
• Color:  Clear
• Tensile Strength (lbs/in):     24     PSTC-131*  (ASTM D3759**)
• Elongation (% at break):     140    PSTC-131   (ASTM D3759)
• 180° Peel Adhesion (oz/in): 24     PSTC-101   (ASTM D3759***)
• Resistance to UV Lighting:   Excellent
• Application Temperature:     32° to 140° F
• Operating Temperature:      -10° to 200° F – normal range

Polypropylene tape water based acrylic adhesive

• Acrylic 2” x 1,000 yards 1.8 mil
• (6 Rolls / Case)
• Film:   Biaxially Oriented Polypropylene
• Total Thickness:  1.8mils (nominal)
• Adhesive:  Emulsion Acrylic
• Color(s):   Clear
• Tensile Strength (lbs/in):      22        PSTC-131*    (ASTM D3759**)
• Elongation (% at break):      140     PSTC-131     (ASTM D3759)
• 180° Peel Adhesion (oz/in):  22        PSTC-101     (ASTM D3759***)
• Persistance to UV Lighting:    Excellent      
• Application Temperature       32° to 140° F            
• Operating Temperature        -10° to 200° F – normal range

• Simple to operate
• Heavy Duty Construction
• LCD Screen and PLC
• Programmable wrap pattern 
• Single button automatic cycle start
• Emergency stop button
• Variable film carriage speed
• Auto load height photo-eye
• Manual controls

• Max Pallet Size:                  50” W x 50” L x 98” H
• Machine Dimensions:          96.5" L x 59" W x 109.5" H
• App. Shipping Weight:          1,300 Lbs.
• Power Requirements:          120V / 1Ph / 15A Dedicated Service
• Maximum Load Weight:        4000 Lbs

This bottle capping machine is ideal if you work with pills, coated capsules, or other tablets. And since different types of products require different industrial needs, this capper machine can fill everything from plastic bags to bottles.

Adjust the bottle height if need be, as well as the torque to best suit your preferences. And since this capping equipment is hand-held and sleek in design, it’s simple to use for any purpose. Plus, don’t worry about cap breakage thanks to the rubber on the bottom of the machine.

With convenience and efficiency like this, not to mention a stainless steel and aluminum alloy frame, you can’t go wrong with this bottle capping machine.

Here are some specifics when it comes to this capping equipment, as well as some reviews:

• Cap type: screw cap
• Cap diameter: 30mm ~ 60mm
• Capping speed: 20~30 bottles/ min
• Air pressure requirement: 2~5kg
• Voltage: 110V / 60Hz
• Amperage: 5A
• Power: 180W

*Designed for small boxes

Minimum box size 7 x 3.14 x 3.94
Maximum box size 10 x 7.87 x 7.87
Output is estimated at 12-15 boxes / min.

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard (See Separate List for Sizing)
• Tubing: Silicone 7/16 Inch OD
• Valve: ¼"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel – Food Grade Standard
• Seals: Buna – Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8”
• Spring Stainless – Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 5ml - (Max)10 Liters
  will fill 35qty 1-Oz bottles of water in 60 seconds

BOX CODE PRINTER

Mount on any of our carton sealers!

• CoPilot uses proven Xaar piezo technology resulting in razor-sharp print
• Print up to .7″ of hi-resolution characters, bar codes, and logos at 185 dpi
• CoPilot’s 4.3″ full color touchscreen
• Compatible with Squid Ink’s easy-to-use Orion™ message software

 ** Ink not included with printer purchase

The CoPilot Hi-Resolution Printing System utilizes oil-based inks for printing on a wide range of porous substrates.

Not compatible with solvent-based inks / non-porous substrates.*

** Ink not included with printer purchase.
** Contact a sales rep to customize for your application.

• Top and bottom belt drives
• Suitable for all general boxes. To seal the box’s top and bottom edges, four edges sealed continuously
• PLC controlled
• Adjusted manually for box width by crank handle
• Infeed push-carton conveyor  Box height adjustment is motor-driven (up/down movement)
• Locking casters standard
• Easy operation and maintenance
• Built for 24/7 Operation
• Adjustable leg supports

• Multi-layer extrusion film
• Environmental friendly, Recyclable.
• Easy operation
• Save storage
• Different sizes for all your packing need.
• **Must be sold in quantities of 2 rolls

Case Length: 6" minimum — 20" maximum

Case Width: 6" minimum — 20" maximum Case

Height: 4.5" minimum — 20" maximum

Electrical: 1 1 OVAC-I PH-60Hz - 10 Amps

• Power Supply:110V
• Min Carton size: 9.84 " L x 5.90" W x 3.94” H (250 x 150 x 100 mm)
• Max Carton Size: 21.65 " L x 15.75" W x 15.75” H (550 x 400 x 400 mm)
• Working speed: 12ctns/min
• Machine size: 79"L x 74"W x 57"H
• Machine weight: 990 lbs

Cleveland Equipment’s CE-2500 Continuous Band Sealer is an ideal Two-in-One Bag Sealer Machine!

If you’re looking to streamline your operation, you’ve come to the right place. Our continuous band sealer machines can make your processes more efficient. Read on to learn a bit more about how a continuous bag sealer machine can benefit your operation.

What is a Continuous Sealer?

A continuous band sealer machine is a commercial appliance that uses heat and pressure to seal bags or packages. Also known as a conveyor sealer, a belt sealer, or a bag and seal machine, these machines simplify your processes. 

Since conveyor belt heat sealers are automatic (or semi automatic), they can function on a continuous basis. This means that they require minimal input from an on-site operator, and can function according to their settings. The settings of a commercial bag sealer are adjustable, enabling you to seal a range of packages. 

This results in a safer operation, since there is less potential for human error.

If you’re in need of sealing pouches of different sizes, no problem. Specifically, if your operation only requires a small bag packaging machine, we have you covered. Regardless of size, each belt sealing machine applies a consistent and appropriate amount of heat and pressure. The result is an air-tight, hermetic seal.

Benefits of a Conveyor Heat Sealer

Consistency and efficiency are the most often touted benefits of incorporating a continuous band sealer into your workflow. But the benefits go on and on. For starters, continuous bag sealing machines add speed to your operation. If you have a high volume of bags or pouches to seal, a conveyor sealer will get the job done.

Being in control of your speed also puts you in more control of your output. It’s easier to plan for the future if you have a firm grasp of your production rate. 

The CE-2500 Continuous Band Sealer specifically makes use of both vertical and horizontal configurations. This means additional options and control over your workflow. It also eliminates the need for two machines. After all, facility space can be tight, and streamlining as much as possible is the goal. 

Another specific detail pertaining to the CE-2500 is that it has an embosser wheel. This feature enables you to date or code your packaging on the spot. This keeps your operation organized and continuously up to date, leaving no room for confusion.

• Type: Wrapper
• Materia:l HDPE
• Width: 400mm / 16 inch
• Thickness: 20um
• Length: 450m / 1476ft

• Infeed Hopper Capacity: 100L
• Dispensing Height: 69"
• Bucket volume: 1.8L
• Bucket size: 16.5" L x 5.5" W x 2.76"H
• Dispersing Height 69"
• Lifting speed 2.5 - 5 cubic meter/hour
• Power 550w Voltage 220v
• Size 63"(Base)/110"(Overall) L x 34" W x 89" H (2790x860x2260mm)
• Specification The parts contacted with food are food grade plastic
• Requires Assembly*

Economical Unit for Medium and Small Production Filling

• 7.5 Gallon Hopper
• Fill amount 4oz to 2.5 gal
• Min bottle height 4 in Max 15 inches
• Min bottle opening ½ inch
• Handles from 3 to 30 containers per minute*
• Accepts Free-flowing and low viscosity liquids
• Stainless Steel tank
• Stainless Steel Spouts
• Painted Stand (Stainless Steel Optional)
• Capable of 20+ quarts of water per minute
• Capable of 10+ quarts of syrup per minute
• Capable of 10+ gallons of water per minute
• *Test results based on standard 5 spout machine

• Machine Dimensions 37" L x 24.5" W x 44" H
• Adjustable Height 35.5 TO 42 INCHES
• Angle Adjustment For Tapered Bottles
• Belt Dimensions 1”H x 36” L x ¾” Thickness
• Min. Bottle Width 1mm Diameter
• Max. Bottle Width 7” Diameter
• Electrical Requirements 115V / 1PH / 60Hz

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• Output: (Min) 1ml - (Max)1.4 Liters

Pneumatic conveyor powder loader kit. Aluminum pneumatic loader with Vibra Pulse filter cleaning technology, control panel and 2" inlet. Includes 15' grounded flexible hose, 36" aluminum pick-up wand.

Best for powders or very dusty materials.

Small to medium sized companies needing high rates of speed, blending products, or integrating with automatic baggers.

• Fill Range: 0.5 oz to 20 lbs range
• Output Speed: Up to 600-1500 fills/hour*
• Capacity:5.1 cu.ft. product capacity
• Dual Heads

The CE-S7 can be set to weigh two completely different products at different weights to easily mix products into a container.

• Filling Range 10–5000 ml
• Filling Accuracy ± 1 %
• Power Supply 110v; 50/60 Hz; Single phase
• Driven Device DC Motor
• Dimension (L)18.7" x (W) 13.38" x (H) 12" (475×340×305 mm)

• Type of Machine: Bottle Filler / Gear Filler
• Construction: 304 Stainless Steel Food Grade Standard
• Seals: Buna Food Grade Standard
• Tubing: 5/8 inc OD
• Valve: 3/8"
• Spring: Stainless Food Grade Standard
• (Min) 5ml - (Max)10 Liters Per Head Each Nozzle Fills quantity of 35 , 1-Oz bottles of water in 60 seconds

Small to medium sized companies needing higher rates of filling speeds

• Fill Range:0.5 oz to 5 lbs (various by volume)
• Output Speed:Up to 600-800 fills/hour*
• Capacity:up to 650 cubic inches volume
• Single Head

• 1/8" Seal width x 20" seal length
• 60 second Adjustable Timers for Heat and Cool
• Electronic Temperature control
• Start button
• Includes 2 standard Tube Racks
• Welded steel case with Powder coat finish

• Speed: 25 carriers per minute.
• Easy Change Over from 4 to 6 Packs
• Compact Footprint
• Allen Bradley Controls
• 220V 3-Phase
• FOOTPRINT: 142"L x 47"W x 103"H

CFL200 Liquid Filling Line Machine: At a Glance

Quickly and confidently set up a bottle filling line in a small space. Start a more efficient production run for your business with this compact liquid packaging line machine. Fill up to one bottle per second with assistance from automated processes. Compatible with a wide range of liquid products.

• Volume range: 5 - 240ml per cycle
• Filling speed: up to 60 bottles /min depending on fill volume
• Filling accuracy: +/-1%